77.150.10 铝产品 标准查询与下载
共找到 1726 条与 铝产品 相关的标准，共 116 页
本标准规定了铝及铝合金热轧带材的产品分类、技术要求、试验方法、检验规则及包装、标志、运输、贮存等。 本标准适用于非深冲用铝及铝合金热轧带材。
Hot rolled strip of aluminum and aluminum alloy
- ICS
- 77.150.10
- CCS
- H61
- 发布
- 1996-08-29
- 实施
- 1997-02-01
本标准规定了变形铝及铝合金的化学成分。 本标准适用于以压力加工方法生产的铝及铝合金加工产品（板、带、箔、管、棒、型、线、和锻件）及其所用的铸锭和板坯。
Wrought aluminium and aluminium alloys--Chemical composition limits
- ICS
- 77.150.10
- CCS
- H61
- 发布
- 1996-07-09
- 实施
- 1997-01-01
本标准规定了工业用纯铝箔的产品分类、技术要求、试验方法、检验规则以及包装、标志、运输、贮存等。 本标准适用于卷烟、食品、医药包装及电缆等工业用铝箔的生产、检查与验收。
Aluminium foil for general purpose
- ICS
- 77.150.10
- CCS
- H61
- 发布
- 1996-07-09
- 实施
- 1997-01-01
本标准规定了变形铝及铝合金的状态代号。 本标准适用于铝及铝合金加工产品。
Temper designation system for wrought aluminium and aluminium alloy
- ICS
- 77.150.10
- CCS
- H61
- 发布
- 1996-07-09
- 实施
- 1997-01-01
本标准规定了变形铝及铝合金的牌号表示方法。 本标准适用于铝及铝合金加工产品及其坯料。
Wrought aluminium and aluminium alloy--Designation system
- ICS
- 77.150.10
- CCS
- H61
- 发布
- 1996-07-09
- 实施
- 1997-01-01
Technical specifications for green design product evaluation Electronic aluminum foil
- ICS
- 77.150.10
- CCS
- H 60
- 发布
- 2024-06-14
- 实施
- 2024-07-14
1、本文件明确了有色消光电泳的术语和定义。 2、本文件阐述了铝及铝合金有色消光电泳型材的范围、要求、试验方法、检验规则和标志、包装、运输、贮存及质量证明书及订货单（合同）内容。 3、本文件适用于表面经阳极氧化（染色、电解着色）和有色消光电泳涂漆复合处理的铝及铝合金热挤压型材（以下简称型材）。 4、表面处理方式相同的铝合金加工件也可以参照执行。
Aluminum and Aluminum alloy profile with colored matt electrodeposition coating
- ICS
- 77.150.10
- CCS
- C325
- 发布
- 2024-05-22
- 实施
- 2024-07-22
Standard Specification for Aluminum-Alloy Rolled Tread Plate
- ICS
- 77.150.10
- CCS
- 发布
- 2024-05-15
- 实施
本文件规定了制冷设备用铜铝连接管的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书。 本文件适用于制冷设备用铜铝连接管的生产和检验。
Copper and aluminum connecting pipes for refrigeration equipment
- ICS
- 77.150.10
- CCS
- C321
- 发布
- 2024-05-08
- 实施
- 2024-05-23
Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
- ICS
- 77.150.10
- CCS
- 发布
- 2024-05-01
- 实施
本文件规定了汽车压缩机涡旋（以下简称“涡旋盘”）的术语和定义、技术要求、试验方法、检验规则、包装、运输和贮存。 本文件适用于汽车压缩机涡旋盘的设计、生产、检验和使用。
automotive compressor scroll
- ICS
- 77.150.10
- CCS
- C321
- 发布
- 2024-04-17
- 实施
- 2024-05-02
Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
- ICS
- 77.150.10
- CCS
- 发布
- 2024-04-01
- 实施
Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
- ICS
- 77.150.10
- CCS
- 发布
- 2024-04-01
- 实施
1.1 This specification covers heat resistant aluminumzirconium alloy round wire for electrical purposes. There is a family of aluminum-zirconium alloys that are used for heat resistance (that is, resist annealing), which differ by zirconium content, tensile strength, electrical conductivity, and maximum use temperature. This standard covers one currently commercially applicable alloy from this family. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
- ICS
- 77.150.10
- CCS
- 发布
- 2024-04-01
- 实施
本文件规定了“江西绿色生态 阳极氧化铝型材”品牌认证的术语和定义、评价条件、技术要求和品牌互认等内容。 本文件适用于阳极氧化铝型材的生产企业申请“江西绿色生态”品牌自我评价和第三方认证活动。“江西绿色生态 阳极氧化铝型材”的产品质量检测可参照本文件执行。
Jiangxi Green Ecology - Aluminum alloys anodized profiles
- ICS
- 77.150.10
- CCS
- C321
- 发布
- 2024-02-07
- 实施
- 2024-02-14
BS ISO 209 Wrought aluminium and aluminium alloys - Chemical composition
- ICS
- 77.150.10
- CCS
- 发布
- 2024-02-05
- 实施
- 2024-02-05
本文件规定了新能源汽车电池冷却用钎焊铝合金板材的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书。
Brazed aluminum alloy plates for new energy vehicle battery cooling
- ICS
- 77.150.10
- CCS
- C325
- 发布
- 2024-01-11
- 实施
- 2024-01-11
本文件规定了铸轧铝卷的标记、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书。 本文件适用于铸轧铝卷的生产和检验。
Cast rolled aluminum coil
- ICS
- 77.150.10
- CCS
- C332
- 发布
- 2023-12-15
- 实施
- 2023-12-30
EN 603-2 Aluminium and aluminium alloys. Wrought forging stock. - Part 2. Mechanical properties
- ICS
- 77.150.10
- CCS
- 发布
- 2023-11-09
- 实施
- 2023-11-09
Standard Specification for Tungsten Plate, Sheet, and Foil
- ICS
- 77.150.10
- CCS
- 发布
- 2023-11-01
- 实施
