77.150.10 铝产品 标准查询与下载

T/ZZB 2385-2021 再生铸造铝合金锭

本文件规定了再生铸造铝合金锭（以下简称再生铝锭）的术语和定义、牌号、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量说明书和质量承诺。 本文件适用于以再生铝为主要原材料，铝合金铸件用的铸造铝合金锭。

Recycled casting aluminum alloy ingot 2021

EN 603-3:2021 铝和铝合金.锻造坯料.第3部分:尺寸和形状公差

Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form

DS/EN 1706:2021 铝及铝合金 – 铸件 – 化学成分和机械性能

Aluminium and aluminium alloys – Castings – Chemical composition and mechanical properties

NF A57-220*NF EN 1706+A1:2021 铝和铝合金 铸件 化学成分和机械性能

Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties

NF A57-220/IN1*NF EN 1706/IN1:2021 铝和铝合金 铸件 化学成分和机械性能

Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties

EN 1706:2020+A1:2021 铝和铝合金.铸件.化学成份和机械性能 包含修改件A1,2021

Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties

T/FSS 13-2021 佛山标准 铝合金建筑型材-喷粉型材

本文件规定了铝合金建筑型材-喷粉型材产品的要求、试验方法、检验规则、标志、包装、运输、贮存与质量证明书、订货单（或合同）内容及质量承诺。 本文件适用于铝合金建筑型材-喷粉型材产品。

Foshan standard Wrought aluminium alloy extruded profiles for architecture — Powder coating profiles

T/FSS 12-2021 佛山标准 铝合金建筑型材-电泳涂漆型材

本文件规定了铝合金建筑型材-电泳涂漆型材产品的要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书、订货单（或合同）内容及质量承诺。 本文件适用于铝合金建筑型材-电泳涂漆型材产品。

Foshan standard Wrought aluminium alloy extruded profiles for architecture — Electrodeposition coating profiles

T/FSS 15-2021 佛山标准 铝合金建筑型材-隔热型材

本文件规定了铝合金建筑型材-隔热型材产品的术语和定义、要求、试验方法、检验规则、标志、包装、运输、贮存与质量证明书、订货单（或合同）及质量承诺内容。 本文件适用于铝合金建筑型材-隔热型材产品。

Foshan standard Wrought aluminium alloy extruded profiles for architecture 一 Thermal barrier profiles

T/CBMMAS 001-2021 建筑节能门窗用铝-挤压木复合型材

本标准主要技术内容是:1. 范围；2.规范性引用文件；3.术语和定义；4.分类 代号和标记；5.要求；6.试验方法；7.检验规则；8.标志、包装、运输、贮存。

Combined Profiles of Aluminum Alloy and Wood-plastic Composite for Energy-saving Windows and Doors in Buildings

T/QGCML 147-2021 中间包稳流器

本文件规定了中间包稳流器的型号、技术要求、试验方法、检验规则、标志、包装、运输、储存及质量证明书。 本文件适用于中间包用稳流器的生产、销售。

Tundish stabilizer

GSO ASTM B221:2021 铝和铝合金挤压棒材、棒材、线材、型材和管材的标准规范

This specification covers extruded bars, rods, wires, profiles, and tubes made from aluminum and aluminum alloys. All the products should be produced by hot extrusion or similar methods. The chemical composition of each material is determined in accordance with the specified suitable chemical and spectrochemical test methods. Samples for chemical analysis should be taken when the ingots are poured or from the finished or semi-finished products by drilling, sawing, milling, turning, or clipping. Tensile properties, elongation, and yield strengths of each product should conform to the requirements listed herein. Elongation requirements are not applicable for materials with sizes smaller than the specified limits.

Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

GSO EN 485-1:2021 铝及铝合金 片材、带材和板材 检验和交货技术条件

This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing. It applies to products with a thickness over 0,20 mm up to and including 400 mm. For many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document. The selection of the relevant special European Standards is under the responsibility of the purchaser. Whenever the application involves special properties, such as corrosion resistance, toughness, fatigue strength, surface appearance and welding properties, the user should consult the supplier and consider the relevant special European Standard, as applicable.

Aluminium and aluminium alloys. Sheet, strip and plate. Technical conditions for inspection and delivery

GSO EN 485-4:2021 铝和铝合金薄板、带材和板材 第4部分：冷轧产品形状和尺寸公差

This part of EN 485 specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheets, strips and plates obtained by cold-rolling, for general engineering applications. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, etc. sheets and strips or to special applications such as aerospace, can stock, etc. which are dealt with in separate European standards. Technical conditions for inspection and delivery of those products are specified in EN 485-1.

Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products

T/SGZX 002-2021 电解电容器高压阳极铝箔用铸锭

      本文件规定了电解电容器高压阳极铝箔用铸锭（以下简称铸锭）的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书。       本文件适用于以重熔用精铝锭为原料，生产用于制造电解电容器高压阳极箔的铝合金扁铸锭。

Ingot for high voltage anode aluminum foil of electrolytic capacitor

21/30394823 DC BS ISO 6362-3 变形铝和铝合金 挤压棒材、管材和型材 第 3 部分：挤压矩形棒材 形状和尺寸公差

BS ISO 6362-3. Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles - Part 3. Extruded rectangular bars. Tolerances on shape and dimensions

21/30394826 DC BS ISO 6362-4 变形铝和铝合金 挤压棒材、管材和型材 第 4 部分：型材 形状和尺寸公差

BS ISO 6362-4. Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles - Part 4. Profiles. Tolerances on shape and dimensions

21/30394832 DC BS ISO 6362-7 变形铝和铝合金 挤压棒材、管材和型材 第 7 部分：化学成分

BS ISO 6362-7. Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles - Part 7. Chemical composition

21/30394841 DC BS ISO 6363-3 变形铝和铝合金 冷拔棒材、管材和线材 第 3 部分：拉制圆棒材和线材 形状和尺寸公差（直径对称正负公差）

BS ISO 6363-3. Wrought aluminium and aluminium alloys. Cold-drawn rods/bars, tubes and wires - Part 3. Drawn round bars and wires. Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)

21/30394847 DC BS ISO 6363-5 变形铝和铝合金 冷拔棒材、管材和线材 第 5 部分：拉制方形和六角形棒材和线材 形状和尺寸公差

BS ISO 6363-5. Wrought aluminium and aluminium alloys. Cold-drawn rods/bars, tubes and wires - Part 5. Drawn square and hexagonal bars and wires. Tolerances on form and dimensions