77.150.10 铝产品 标准查询与下载

EN 755-9:2016 铝及铝合金-挤压短棒材/棒材,管材和型材-第9部分:在尺寸和形状上的公差

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded profile with a cross section contained within a circumscribing circle not greater than 800 mm. The temper designations used in this part are according to EN 515. This European Standard applies to extruded profiles for general engineering applications only.

Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 9: Profiles@ tolerances on dimensions and form

EN 755-8:2016 铝和铝合金.挤压棒材/条材,管材和型材.第8部分:出口孔的尺寸和形状公差

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded porthole tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube) or with a cross section contained within a circumscribing circle (CD) from 10 mm to 350 mm (other than round tube), supplied in straight lengths. This European Standard only applies to extruded porthole tube for general engineering applications made in the following alloys: - EN AW-1050A, EN AW-1200, EN AW-1350; - EN AW-3003, EN AW-3103; - EN AW-5005, EN AW-5005A, EN AW-5049, EN AW-5051A, EN AW-5251, EN AW-5052; - EN AW-6101A, EN AW-6101B, EN AW-6005, EN AW-6005A, EN AW-6008, EN AW-6110A, EN AW-6012, EN AW-6014, EN AW-6018, EN AW-6351, EN AW-6060, EN AW-6360, EN AW-6061, EN AW-6261, EN AW-6262, EN AW-6262A, EN AW-6063, EN AW-6063A, EN AW-6463, EN AW-6065, EN AW-6081, EN AW-6082; EN AW-6182; - EN AW-7003, EN AW-7005, EN AW-7108, EN AW-7108A, EN AW-7020. The temper designations used in this part are according to EN 515. This European Standard only applies to tube produced by the tube porthole/bridge method. This European Standard does not apply to; - extruded tubes produced by the seamless, die/mandrel method (EN 755-7); - tubes delivered in coils (EN 13957); - coiled tubes cut to length (EN 13957).

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form

EN 755-1:2016 铝及铝合金-挤压短棒材/棒材,管材和型材-第1部分:检验和交货技术条件

This European Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy extruded rod/bar, tube and profile for general engineering applications. This European Standard does not apply to: - forging stock (EN 603 (all parts)); - extruded precision profiles in alloys EN AW-6060 and EN AW-6063 (EN 12020 (all parts)); - products delivered in coils (EN 13957); - coiled tubes cut to length (EN 13957).

Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 1: Technical conditions for inspection and delivery

EN 754-8:2016 铝及铝合金-冷拔棒材条材和管材-第8部分:多孔拉拔管尺寸和形状公差

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn porthole tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube) or with a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than round tube), supplied in straight lengths. This document only applies to cold drawn tube for general engineering applications made in the following alloys: - EN AW-1050A, EN AW-1200; - EN AW-3003, EN AW-3103; - EN AW-5005, EN AW-5005A, EN AW-5049, EN AW-5251, EN AW-5052; - EN AW-6012, EN AW-6060, EN AW-6061, EN AW-6262, EN AW-6262A; - EN AW-6063, EN AW-6063A, EN AW-6065, EN AW-6082; - EN AW-7020. The temper designations used in this part are according to EN 515. This document only applies to tube produced by the porthole/bridge method of extrusion only (and then cold drawn to the final dimensions). This document does not apply to; - cold drawn tubes produced by the seamless, die/mandrel method (EN 754-7); - tubes delivered in coils (EN 13958); - coiled tubes cut to length (EN 13958).

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes@ tolerances on dimensions and form

EN 754-7:2016 铝及铝合金-冷拔棒材条材和管材-第7部分:无缝管,尺寸和形状公差

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloys cold drawn seamless tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube) or with a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than round tube) supplied in straight lengths. This European Standard only applies to tube produced by the seamless die/mandrel method of extrusion (and then cold drawn to the final dimensions required). The temper designations used in this part are according to EN 515. This document applies to cold drawn, seamless tube for general engineering applications. This document does not apply to: - cold drawn tube produced by the porthole/bridge method (EN 754-8); - tubes delivered in coils (EN 13958); - coiled tubes cut to length (EN 13958).

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes@ tolerances on dimensions and form

BS EN 755-2:2016 铝及铝合金 挤压棒材、管材和型材 机械性能

Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties

BS EN 754-1:2016 铝及铝合金 冷拔棒/棒和管 检验和交货技术条件

Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Technical conditions for inspection and delivery

EN 754-1:2016 铝及铝合金-冷拔棒材条材和管材-第1部分:检验和交货技术条件

This European Standard specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy cold drawn rod/bar and tube for general engineering applications. This document applies to products which are extruded and then cold drawn. This document does not apply to:- forging stock (EN 603); - products delivered in coils (EN 13958); - coiled tubes cut to length (EN 13958).

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery

EN 12392:2016 铝及铝合金-锻制品和铸造制品-压力设备生产用产品的特殊要求

This European Standard specifies the material requirements and testing procedures applicable to wrought and cast aluminium and aluminium alloys intended for use in the production of pressure equipment. This European Standard covers: - the products forms, grades and tempers of wrought and cast aluminium and aluminium alloys which may be used for such applications together with data for wrought and cast alloys over their permissible working temperature ranges; - the permissible alloys/ tempers covered by this are those given in Table A.1 and in B.1 for wrought alloys and in Table A.2 and in B.2 for castings; - the technical conditions for inspection and delivery, mechanical property limits and tolerances on form and dimensions by reference to the appropriate European standards for the relevant wrought and cast aluminium and aluminium alloys, and; - additional requirements which are specific to pressure equipment applications. It applies to hot-rolled plate, cold-rolled sheet/ strip/ circles, extruded or extruded and cold drawn rod/bar, tube, extruded open / hollow profiles, forgings and castings, by this standard are those given in Table A.1 for wrought alloys and in Table A.2 for castings. It is the sole objective of this standard to cover materials only for pressure purposes and it excludes any elements of fabrication or fabrication methods for pressure equipment; such information can be found in the relevant standards listed in the "Bibliography" section.

Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment

EN 755-2:2016 铝及铝合金-挤压短棒材/棒材,管材和型材-第2部分:力学性能

This European Standard specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile. Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 755-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.

Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 2: Mechanical properties

BS EN 16773:2016 铝和铝合金. 半刚性食品容器领域中箔坯的生产指南

Aluminium and aluminium alloys. Guideline for the production of foil-stock in the field of semi rigid foodstuff containers

EN 16773:2016 铝和铝合金.准则的箔库存中的半刚性食品容器领域中的生产

This European Standard provides a guideline about manufacturing practices for rolled products in the thicknesses range between 35 µm and 200 µm having surface quality characteristics essential for production of aluminium semi-rigid containers, lids and disposable platters which are used in contact with foodstuff. This European Standard can be applied to the production cycle of the "rolled semi-finished goods". The European Standard cannot be applied to the production process of containers, lids and disposable platters.

Aluminium and aluminium alloys - Guideline for the production of foil-stock in the field of semi rigid foodstuff containers

ASTM B746/B746M-16 现场栓接管, 管拱和拱用波纹铝合金结构板的标准规格

1.1 This specification covers corrugated aluminum alloy structural plate used in the construction of pipe, pipe-arches, arches, underpasses, box culverts, and special shapes for field assembly. Appropriate fasteners are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels. Aluminum box culvert shapes are covered in Specification B864/B864M. 1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of plate thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated aluminum structural plate pipe and the proper installation procedures are given in Practices B790/B790M and B789/B789M, respectively. A procedure for using life-cycle cost analysis techniques to evaluate alternate drainage system designs using corrugated metal pipe is given in Practice A930. 1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.

Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

GOST 1048-2016 弹簧用铝青铜条. 规格

Strips of aluminium bronze for springs. Specifications

GOST R 56855-2016 造船用铝合金挤压型材. 规格

Extruded shapes of aluminium alloy for shipbuilding. Specifications

GOST R 56854-2016 造船用铝合金挤压棒材. 规格

Extruded bars of aluminium alloy for shipbuilding. Specifications

GOST R 57125-2016 铝合金挤压制品. 缺陷术语和定义

Aluminium alloy extruded products. Terms and definitions of defects

GOST R 57126-2016 铝合金锭. 缺陷术语和定义

Aluminium alloy ingots. Terms and definitions of defects

ASTM B941-16 电气用耐热铝锆合金丝的标准规格

1.1 This specification covers heat resistant aluminum-zirconium alloy round wire for electrical purposes. There is a family of aluminum-zirconium alloys that are used for heat-resistance (that is, resist annealing), which differ by zirconium content, tensile strength, electrical conductivity, and maximum use temperature. This standard covers one currently commercially applicable alloy from this family. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes

GSO ISO 3522:2015 铝及铝合金铸件化学成分和机械性能

This International Standard specifies the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test bars for these alloys.

Aluminium and aluminium alloys -- Castings -- Chemical composition and mechanical properties