77.150.30 铜产品 标准查询与下载

ASTM B601-18a 铜和铜合金回火名称的标准分类&x2014；锻铸

1.1 This classification establishes temper designations for copper and copper alloys—wrought and cast. The temper designations are classified by the process or processes used in manufacturing the product involved and its resulting properties. It is not a specification of copper and copper alloys. 1.2 The property requirements for the tempers are given in the applicable product specification. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast

ASTM B882-10(2018) 建筑用预镀铜的标准规范

1.1 This specification covers the establishment of the requirements for pre-patinated (artificially aged) copper sheet and strip in ounce-weight thicknesses supplied in flat lengths for roofing, flashing, and other architectural applications. 1.2 The pre-patinated surface is the result of chemical reaction with the copper and shall be applied on one side of the product. 1.2.1 The pre-patinated surface formed is comparable in color and ability to be bent or formed to the surface formed in naturally occurring patinated copper. 1.3 The pre-patinated surface is not the result of coating applications such as painting. 1.4 Materials made to this specification are not intended to be used for electrical applications. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. NOTE 1—A companion specification for copper sheet and strip for building construction is Specification B370. 1.6 The following precautionary statement pertains only to the test method portion, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Pre-Patinated Copper for Architectural Applications

ASTM B21/B21M-18 海军黄铜杆、棒和型材的标准规范

Standard Specification for Naval Brass Rod, Bar, and Shapes

ASTM B2-13(2018) 中硬拉铜线的标准规范

1.1 This specification covers medium-hard-drawn round copper wire for electrical purposes (see Explanatory Note 1). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1 Exception—For density, resistivity and temperature, the values stated in SI units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Medium-Hard-Drawn Copper Wire

ASTM B124/B124M-18a 铜和铜合金锻造棒、棒和型材的标准规范

Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

ASTM B171/B171M-18 压力容器、冷凝器和热交换器用铜合金板和薄板的标准规范

1.1 This specification2 establishes the requirements for copper-alloy plate, sheet, and circles cut from plate and sheet for pressure vessels, condensers, and heat exchangers. The following alloys are covered: Copper Alloy Previously Used Designation C36500 Leaded Muntz Metal C44300 Admirality, Arsenical C44400 Admirality, Antimonial C44500 Admirality, Phosphorized C46400 Naval Brass, Uninhibited C46500 Naval Brass, Arsenical C61300 Aluminum Bronze C61400 Aluminum Bronze D C63000 10 % Aluminum-Nickel Bronze C63200 9 % Aluminum-Nickel Bronze C70600 90-10 Copper Nickel C70620 90-10 Copper Nickel-(modified for welding) C71500 70-30 Copper Nickel C71520 70-30 Copper Nickel-(modified for welding) C72200 . . . 1.2 Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

T/ZZB 0466-2018 高精度易切削黄铜棒

本标准规定了高精度易切削黄铜棒的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书、订货单（或合同）内容和质量承诺。 本标准适用于直径或对边距3 mm～16 mm的圆形、矩（方）形、六角形易切削黄铜棒（以下简称棒材）。

High precision free-cutting brass rod and bar

JIS H 3130:2018 弹簧用铜铍合金、铜钛合金、磷青铜、铜镍锡合金和镍银薄板材、板材和带材

Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and nickel silver sheets, plates and strips for springs

JIS H 3270:2018 铜铍合金、磷青铜和镍银杆材、棒材及丝材

Copper beryllium alloy, phosphor bronze and nickel silver rods, bars and wires

JIS H 3110:2018 磷青铜和镍银合金薄板、板材和带材

Phosphor bronze and nickel silver sheets, plates and strips

T/ZZB 0450-2018 气门嘴用高强度黄铜合金棒、线及厚壁管

本标准规定了气门嘴用高强度黄铜合金棒、线及厚壁管的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书、订货单（或合同）内容及质量承诺。 本标准适用于气门嘴用高强度黄铜合金棒、线及厚壁管。

High strength brass alloy rod, wire and thick-wall tube for tire valve

DIN EN 12861:2018 铜与铜合金.废料; 德文版本EN 12861-2018

This European Standard specifies the requirements for characteristics, condition, moisture, composition, metal content, metal yield and test procedures of metallic raw materials for direct melting (melting grades) in the form of copper and copper alloy scrap. All provisions of this European Standard apply regardless of the legal status of the scrap. The respective legal requirements should be met.

Copper and copper alloys - Scrap; German version EN 12861:2018

NF A51-600*NF EN 12861:2018 铜及铜合金.废钢

Copper and copper alloys - Scrap

EN 12861:2018 铜与铜合金.废料

Copper and copper alloys - Scrap

JIS H 3140:2018 铜母线

Copper bus bars

ASTM B505/B505M-18 铜合金连铸件标准规范

Standard Specification for Copper Alloy Continuous Castings

ASTM B249/B249M-18 锻铜和铜合金棒、棒材、型材和锻件的一般要求

Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

ASTM B967/B967M-18 铜 - 锌 - 锡 - 铋合金棒材 棒材和线材的标准规范

1.1 This specification establishes the requirements for copper-zinc-tin-bismuth alloy rod, bar and wire of alloy UNS Nos. C49250, C49255, C49260, C49265, C49300, C49340, C49345, C49350, C49355, and C49360 intended for use in plumbing applications and drinking water systems. 1.2 Typically, rod and bar product made to this specification is furnished as straight lengths. Wire (H04) 0.08 to 0.3 in. [2 to 8 mm inclusive] is furnished in coil form, and H50 shapes. 1.3 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 The following safety hazard caveat pertains only to the test method(s) described in this specification. 1.4.1 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

ASTM B601-18 铜和铜合金回火名称的标准分类&x2014；锻铸

Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast

ASTM B643-18 铜铍合金无缝管标准规范

1.1 This specification establishes requirements for copperberyllium alloy seamless tube in straight lengths. Copper Alloy UNS C17200 will be the alloy furnished whenever Specification B643 is specified. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazard caveat pertains only to the test methods described in this specification. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper-Beryllium Alloy Seamless Tube