77.150.99 其他有色金属产品 标准查询与下载

GOST 19351-2006 铱和铑丝.技术条件

Wire made of iridium and rhodium. Specifications

ASTM B737-05 热轧和/或冷轧铪棒和线的标准规格

1.1 This specification covers hot- or cold-worked hafnium rod and wire, or both.1.2 This specification contains two material grades, one specifically for nuclear applications (Grade R1) and one for commercial applications for alloying (Grade R3).1.3 The products covered include the following:1.3.1 Rod 3/8 to 1 in. (9.5 to 25 mm) in diameter.1.3.2 Wire less than 3/8 in. (9.5 mm) in diameter.1.4 Unless a single unit is used, for example, corrosion mass gain in mg/dm2, the values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. SI values cannot be mixed with inch-pound values.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

ASTM B551/B551M-04 薄板和板材用锆及锆合金带材的标准规范

1.1 This specification covers five grades of zirconium strip, sheet, and plate.1.2 Unless a single unit is used, for example corrosion mass gain in mg/dm2, the values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore each system must be used independently of the other. SI values cannot be mixed with inch-pound values.The following precautionary caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

ASTM B551/B551M-04e1 薄板和板材用锆及锆合金带材的标准规范

Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

ASTM B652/B652M-04 铌铪合金铸锭的标准规范

1.1 This specification covers hafnium alloyed niobium ingots prepared by vacuum- or plasma- arc melting or electron-beam furnace melting, or a combination of these methods, to produce consolidated metal for processing to various mill shapes.1.2 The material covered by this specification is Grade R04295, niobium-base alloy containing approximately 10 % hafnium and 1 % titanium.1.3 The values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. SI values cannot be mixed with inch-pound values.

Standard Specification for Niobium-Hafnium Alloy Ingots

ASTM B914-03e2 锌和锌合金锭用于钢铁热镀锌的颜色代码标准实践

Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel

ASTM B493-01(2003) 锆及锆合金锻件标准规范

Standard Specification for Zirconium and Zirconium Alloy Forgings

GOST 5187-2003 白铜、锌白铜及蒙乃尔合金带材.技术条件

Nickel silver, german silver and monel tapes. Specifications

ASTM B737-01 热轧和/或冷轧铪棒和线的标准规格

1.1 This specification covers hot- or cold-worked hafnium rod and wire, or both. 1.2 This specification contains two material grades, one specifically for nuclear applications (Grade R1) and one for commercial applications for alloying (Grade R3). 1.3 The products covered include the following: 1.3.1 Rod 3/8 to 1.0 in. (9.5 to 25.4 mm) in diameter.1.3.2 Wire less than 3/8 in. (9.5 mm) in diameter. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. 1.5 This standard does not purport to address the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

ASTM B353-00 用于核服务的锻锆和锆合金无缝和焊接管的标准规范（核燃料包层除外）

1.1 This specification covers seamless and welded wrought zirconium and zirconium-alloy tubes for nuclear application. Nuclear fuel cladding is covered in Specification B811. 1.2 Five grades of reactor grade zirconium and zirconium alloys suitable for nuclear application are described. 1.2.1 The present UNS numbers designated for the five grades are given in Table 2. 1.3 Unless a single unit is used, for example corrosion mass gain in mg/dm2, the values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore each system must be used independently of the other. SI values cannot be mixed with inch-pound values. 1.4 The following precautionary caveat pertains only to the test method portions of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

ASTM B350/B350M-01a 用于核应用的锆和锆合金锭的标准规范

Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application

ASTM B392-99 铌和铌合金棒 棒和线的标准规范

1.1 This specification covers four grades of wrought niobium and niobium alloy bar, rod, and wire as follows: Note-Committee B-10 has adopted "niobium" as the designation for Element No. 41, formerly named "columbium." 1.1.1 R04200-Type 1 -Reactor grade unalloyed niobium, 1.1.2 R04210-Type 2 -Commercial grade unalloyed niobium, 1.1.3 R04251-Type 3 -Reactor grade niobium alloy containing 1% zirconium, and 1.1.4 R04261-Type 4 -Commercial grade niobium alloy containing 1% zirconium. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

ASTM B654-92(1999) 铌铪合金箔、薄板、带材和板材的标准规范

Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

ARMY MIL-T-48140 REINST NOTICE 3-1997 (烟火制造使用的)钨粉

MIL-A-6348D, dated 19 Nov 79, has been reviewed and determined to be valid for use in acquisition

TUNGSTEN POWDER (FOR PYROTECHNICS)

ARMY MIL-T-48140 NOTICE 4-1997 (烟火制造使用的)钨粉

This notice should be filed in fiont of MIL-T-4814û(AR) dated 24 April 1973

TUNGSTEN POWDER (FOR PYROTECHNICS)

ASTM B413-97a(2017) 精炼银的标准规格

1.1 This specification covers refined silver cast bar2 form in three grades as follows: 1.1.1 Grade 99.90 (UNS P07020)—Silver having a minimum fineness of 999.0 commonly referred to as “commercial bar” or “bullion.” 1.1.2 Grade 99.95 (UNS P07015)—Silver having a minimum fineness of 999.5. 1.1.3 Grade 99.99 (UNS P07010)—A premium grade having a minimum fineness of 999.9. 1.2 The values stated in inch-pound units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards, including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Refined Silver

CNS 7489-1991 精炼银分析法

本标准规定为 CNS 7488 〔精炼银〕中化学成份（铅、铋、铜、铁）之分析方法。

Methods for Chemical Analysis of Refined Silver

GOST 1525-1991 蒙耐合金杆.规范

Настоящий стандарт распространяется на тянутые и горячекатаные прутки круглого сечения из никелевого сплава монель

Rods of monel. Specifications

GOST 19671-1991 光源用钨丝.技术条件

Настоящий стандарт распространяется на вольфрамовую тянутую проволоку группы А (черная) марок ВА, ВМ, ВРН, ВТ-7, ВТ-10, ВТ-15, изготовленную мет

Tungsten wire for light sources. Specifications

ASTM B387-90(2001) 钼及钼合金棒、条和线材

1.1 This specification covers unalloyed molybdenum and molybdenum alloy bar, rod, and wire as follows: 1.1.1 Molybdenum 3608212;Unalloyed vacuum arc-cast molybdenum. 1.1.2 Molybdenum 3618212;Unalloyed powder metallurgy molybdenum. 1.1.3 Molybdenum Alloy 3638212;Vacuum arc-cast molybdenum-0.5% titanium-0.1% zirconium (TZM) alloy. 1.1.4 Molybdenum Alloy 3648212;Powder metallurgy molybdenum-0.5% titanium-0.1% zirconium (TZM) alloy. 1.1.5 Molybdenum 3658212;Unalloyed vacuum arc-cast molybdenum, low carbon. 1.1.6 Molybdenum Alloy 3668212;Vacuum arc-cast molybdenum, 30% tungsten alloy. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.

Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire