79.060.01 木基板材综合 标准查询与下载

LST EN 324-2-1999 人造板 板尺寸的测定 第2部分：垂直度和边缘直线度的测定

Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness

LST EN 324-1-1999 人造板 板材尺寸的测定 第1部分：厚度、宽度和长度的测定

Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length

LST EN 322-1999 人造板 水分含量的测定

Wood-based panels - Determination of moisture content

NF B51-153:1999 木基板.负荷持续时间和蠕变因子的测定

Wood-based panels - Determination of duration of load and creep factors

Wood-based panels - Determination of duration of load and creep factors

DD ENV 1156-1999 木质板材.持续负荷和蠕变系数的测定

Wood-based panels. Determination of duration of load and creep factors

DD ENV 717-1-1999 木质板材.甲醛释放量的测定.用室式收集法控制甲醛的散发

Wood-based panels. Determination of formaldehyde release. Formaldehyde emission by the chamber method

ASTM D4933-99(2010) 木材和木基材料湿度的调节的标准指南

Many physical and mechanical properties of wood and wood-based materials change in response to the environmental equilibrium moisture content, and any comparison of these properties must take moisture content into account. A consistent base for comparison among different test samples and different laboratories is necessary. Shrinkage and dimensional change in particular are dependent on moisture content, and tests involving their measurement must be conducted with good equilibrium moisture content control. Conditioning can also be important in industrial settings where there are optimum moisture content levels for many products and processes, and conformance to these levels can reduce losses in quality and yield.1.1 This guide covers standard procedures for conditioning and equilibrating wood and wood-based materials to constant moisture content. The procedures apply to solid wood, wood-based fiber and particulate materials and panels, and wood products containing adhesives. They are intended for use in research and development activities, testing laboratories, quality control, and for all other classes of producers and users. This guide includes background material on the importance of moisture content control, important definitions and technical data, possible types of apparatus, procedures, and the importance of conditioning time. Users should recognize that the necessary degree of precision and bias varies with the intentions of the users. Some research and testing, for example, might require very close control of moisture content, whereas control in an industrial storage facility might not require such close control. This guide offers procedures that include these different requirements. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 The following safety hazards caveat pertains only to the procedure section, Section 6, of this guide. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials

SNI 01-6050-1999 木材板中的甲醛排放标准

Formaldehyde emission on wood-based panels

SR 652-1998 木材，胶合板，木材刨花板，木质纤维板．测定高效防火

Prezentul standard stabile?te metoda de ?ncercare ?n laborator a eficacit??ii produselor ignifuge aplicate pe lemn, placaj, pl?ci de a?chii de lemn ?i pl?ci de fibre de lemn.

Wood, plywood, wood partide boards, wood fibre boards. Determination of efficienty of fireproofing

NF B51-190-3:1998 木基板.取样、切割和检验.第3部分:板的交付检验

Wood-based panels. Sampling, cutting and inspection. Part 3 : inspection of a consignment of panels.

ASTM D5824-98(2011) 暴落在热和水条件下时叠层木芯层压板中粘合剂的抗分层强度测定的标准试验方法

This test method measures quantitatively the effects of water soaking and drying, and their associated swelling and shrinking stresses on adhesive bonds in overlay-laminated assemblies. Adhesive bond performance is based on the ability of the adhesive and adhesive bonds to resist delamination during accelerated exposure to water and heat. Resistance to delamination when subjected to environmental factors is critical to the performance of the laminated assembly in service. This test method is to be used to determine the quality of adhesive bonds in overlay-wood core laminates after the adhesive has been certified by a specification appropriate for the product, class, and end use.1.1 This test method provides a procedure to determine the quality of bond between an overlay and a wood core in an adhesively bonded laminate. The quality of bond is determined by measuring the resistance to delamination of the adhesively bonded laminate when tested under specific conditions of preparation, conditioning, and testing. Such products include, but are not limited to, window and door components, such as stiles and rails, and other overlaid panels. Typical wood-based cores are finger-jointed lumber, particleboard, oriented strand board, and hardboard. Typical overlays would be veneer, high-pressure laminate, high-density polyethylene, and fiberglass-reinforced plastic. 1.2 Adhesive bond performance as measured by resistance to delamination in this test method is suitable for use in adhesive product development, manufacturing quality control, and monitoring bonding processes. 1.3 This test method does not provide guidance for determining bond line performance for plywood products. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

DD ENV 1156-1998 木基板.加载时间和蠕变因素的测定

This European Prestandard specifies a method of determining in a constant climate both a duration of load factorand a creep factor for wood-based panels stressed in flatwise bending with and without a shear component. Detailsof an alternative but provisional method employing medium sized test pieces are given in Annex B;This method canalso be used for test pieces loaded under varying climates.

Wood-Based Panels - Determination of Duration of Load and Creep Factors

ASTM D358-98(2012)e1 涂料耐候性试验中用作嵌板的木材的标准规格

1.1 This specification designates woods for weathering tests of exterior solvent-borne or water-borne paints and other materials of similar purpose. Such tests may include either outdoor exposure tests or accelerated laboratory tests. It is the purpose of this specification to minimize the influence of variation of wood of a given species on test results. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings

DS/EN 717-3:1997 人造板甲醛释放量的测定第3部分：烧瓶法甲醛释放量

This European Standard specifies a method, known as the flask method, for determination of formaldehyde release from uncoated wood-based panels.

Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method

BS EN 717-3:1996 木基面板.甲醛释放量的测定.长颈瓶法测定甲醛释放量

This European Standard specifies a method, known as the flask method, for determination of formaldehyde release from uncoated wood-based panels.

Wood-based panels - Determination of formaldehyde release - Formaldehyde release by the flask method

NF B51-272-3*NF EN 717-3:1996 木基板.甲醛排放量的测定.第3部分:量瓶法测定甲醛排放量

Wood-based panels. Determination of formaldehyde release. Part 3 : formaldehyde release by the flask method.

DIN EN 717-3:1996 木基板料.甲醛释放量测定.第3部分:量瓶法

Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method; German version EN 717-3:1996

BS EN 1058:1996 木制材料.机械性能和密度特性值的测定

Gives method of calculation for determining the characteristic values and follows the same format as BS EN 384:1995.

Wood-based panels - Determination of characteristic values of mechanical properties and density

EN 717-3:1996 木基板料.甲醛释放量测定.第3部分:烧瓶法测定甲醛释放量

This European Standard specifies a method known as the flask method, for determination of formaldehyde release from uncoated wood based panels.

Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method

DS/EN 717-2:1995 人造板甲醛释放量的测定第2部分：气体分析法甲醛释放量

This European standard describes a procedure for determination of accelerated formaldehyde release from wood-based panels.

Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method