共找到 129 条与 其他木基板材 相关的标准,共 9 页
Solid wood panels (SWP) - Requirements.
This European Standard specifies requirements for solid wood panels as defined in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of EN 1995-1-1. Additional information on supplementary properties for certain applications is also given.
Solid wood panels (SWP) - Requirements; German version EN 13353:2008+A1:2011
本标准规定了电工层压木板的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于以桦木等旋切单板涂胶后,再经层积热压制成的电工层压木板。
Laminated wood for electrical purposes
This part of ISO 10033 specifies requirements for determining the bonding quality class of Laminated Veneer Lumber (LVL) bonded with thermosetting resins, according to their intended end uses. NOTE Appropriate test methods are specified in ISO 10033-1.
Laminated Veneer Lumber (LVL) - Bonding quality - Part 2: Requirements
This part of ISO 10033 specifies test methods for determining the bonding quality of Laminated Veneer Lumber (LVL) bonded with thermosetting resin. NOTE If it is possible to demonstrate a correlation between the methods defined in this part of ISO 10033 and other methods, those methods can be used.
Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods
This European Standard specifies requirements for solid wood panels as defined in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of EN 1995-1-1. Additional information on supplementary properties for certain applications is also given.
Solid wood panels (SWP). Requirements
This European Standard specifies a test method for determining the bonding quality of single-layer and multilayer solid wood panels by a shear test.
Solid wood panels (SWP) - Bonding quality - Test method
Wood-based panels - Characteristic values for structural design - Solid-wood panels
Solid wood panels (SWP) - Bonding quality - Test method
This European Standard specifies requirements for solid wood panels as defined in EN 12775 for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of EN 1995-1-1. Additional information on supplementary properties for certain applications is also given.
Solid wood panels (SWP) - Requirements
Laminated Veneer Lumber (LVL) - Definitions, classification and specifications.
Solid wood panels (SWP) - Bonding quality - Test method
Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels
Solid wood panels (SWP) - Requirements.
This European Standard specifies requirements for solid wood panels as defined in EN 12775 for use in dry, humid and exterior conditions as defined in service classes 1,2 and 3 of EN 1995-1-1. Additional information on supplementary properties for certain applications is also given.
Solid wood panels (SWP) - Requirements; English version of DIN EN 13353:2009-02
This European Standard provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1. This European Standard includes the characteristic values of the mechanical properties and of the raw density for solid-wood panels complying with EN 13353:2008 technical classes SWP/1 S, SWP/2 S, SWP/3 S.
Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels; English version of DIN EN 12369-3:2009-02
This European Standard specifies a test method for determining the bonding quality of single-layer and multi- layer solid wood panels by a shear test.
Solid wood panels (SWP) - Bonding quality - Test method; English version of DIN EN 13354:2009-02
This European Standard specifies a test method for determining the bonding quality of single-layer and multi-layer solid wood panels by a shear test.
Solid wood panels (SWP) - Bonding quality - Test method
This European Standard provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1.This European Standard includes the characteristic values of the mechanical properties and of the raw density for solid-wood panels complying with EN 13353:2008 technical classes SWP/1 S, SWP/2 S, SWP/3 S.
Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels
本标准规定了椰壳纤维板的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于以椰壳纤维为骨架材料,把椰壳纤维梳理成丝状,经针刺交织、铺装、喷胶、热压而成的多孔结构的板材。 本标准不适用于用醛类胶粘剂所制的产品。
Coconut shell fiberboard
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号