79.060.99 其他木基板材 标准查询与下载

EN 13354:2008 实心木板(SWP).粘接质量的试验方法

This European Standard specifies a test method for determining the bonding quality of single-layer and multilayer solid wood panels by a shear test.

Solid wood panels (SWP) - Bonding quality - Test method

EN 13353:2008 实心木制板材(SWP).要求

This European Standard specifies requirements for solid wood panels as defined in EN 12775 with a maximum thickness of 80 mm for use in dry; humid and exterior conditions as defined in service classes 1; 2 and 3 of EN 1995-1-1. Additional information on supplementary properties for certain applications is also given.

Solid wood panels (SWP) - Requirements (Incorporates Amendment A1: 2011)

EN 12369-3:2008 木基板材.结构设计用特征值.第3部分:紧密板材

This European Standard provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1.This European Standard includes the characteristic values of the mechanical properties and of the raw density for solid-wood panels complying with EN 13353:2008 technical classes SWP/1 S, SWP/2 S, SWP/3 S.

Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels

DB44/T 411-2007 木塑复合材料 检验与试验方法

本标准规定了木塑复合材料的检验规则及检验方法。本标准适用于木塑复合材料的检验及有关物理力学性能的试验。

Wood-plastic Composites—Examination and Test Methods

KS E ISO 12739:2007 硫化锌浓度.锌含量的测定.离子交换/EDTA滴定法

이 표준은 황화아연 정광 중의 아연 분석 방법을 위한 이온 교환 적정 방법에 대해 규정한다

Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method

KS E ISO 12739-2007(2022) 硫化锌精矿锌含量的测定离子交换和EDTA滴定法

Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method

KS E ISO 12739-2007(2017) 硫化锌精矿化学分析方法离子交换EDTA滴定法测定锌量

Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method

LST EN 14951-2006 实心硬木镶板和覆层 机加工型材元素

Solid hardwood panelling and cladding - Machined profiles elements

DB44/T 349-2006 木塑复合材料 技术条件

本标准规定了木塑复合材料的定义、分类、要求、标志、包装、运输和贮存。本标准适用于木塑复合材料的生产与贸易．

Wood-plastic composites - Technical condition

BS EN 14080:2006 木结构 胶合层压板 要求

Timber structures - Glued laminated timber - Requirements

BS EN 14080:2005 木结构.胶合层压板.要求

This European Standard specifies the requirements for glued laminated timber for use in load bearing structures. It also specifies the requirements for large finger joints in the glued laminated timber. This European Standard specifies the requirements for glued laminated timber produced from untreated timber or from timber treated against biological attack.

Timber structures — Glued laminated timber — Requirements

NF P21-501:2005 木结构.胶合层压板.要求

Timber structures - Glued laminated timber - Requirements.

LST EN 14080-2005 木结构 胶合层压木 要求

Timber structures - Glued laminated timber - Requirements

BS DD CEN/TS 13354:2003 实心木制板材.粘结质量.试验方法

This Technical Specification specifies a test method for determining the bonding quality of single-layer and multilayer solid wood panels by a shear test.

Solid wood panels - Bonding quality - Test method

DD CEN/TS 13354:2003 实心木制板材.粘结质量.试验方法

This Technical Specification specifies a test method for determining the bonding quality of single-layer and multilayer solid wood panels by a shear test.

Solid wood panels. Bonding quality. Test method

BS EN 13353:2003 实心木制板材(SWP).要求

This European Standard specifies requirements for solid wood panels as defined in EN 12775 for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of ENV 1995-1-1:1993. Additional information on supplementary properties for certain applications is also given.

Solid wood panels (SWP) - Requirements

CNS 10483-2003 木片水泥板

本标准适用于木材粒片及水泥为原料经压缩成形者

Wood-cement particleboards

LST EN 13017-2-2002 实木板 按表面外观分类 第2部分：硬木

Solid wood panels - Classification by surface appearance - Part 2: Hardwood

LST EN 13017-1-2002 实木板 按表面外观分类 第1部分：软木

Solid wood panels - Classification by surface appearance - Part 1: Softwood

LST EN 387-2002 胶合层压木 大指接 性能要求和最低生产要求

Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements