79.080 半成品材 标准查询与下载

BS EN 1534:2010 木地板.耐刻痕的测定.试验方法

This European Standard specifies a method, derived from the test, for determining the resistance to indentation of wood flooring.

Wood flooring. Determination of resistance to indentation. Test method

LST EN 1533-2010 木地板静载荷下弯曲强度的测定试验方法

Wood flooring - Determination of bending strength under static load - Test methods

DS/EN 1533:2010 木地板静载荷下弯曲强度的测定试验方法

This European Standard specifies methods of determining the bending strength of wood and parquet flooring under static loads: a method with a static line load and a method with a static point load.The methods apply to wood and parquet flooring installed on a non-continuous support and thus assuming static load-bearing conditions.

Wood flooring - Determination of bending strength under static load - Test methods

BS EN 1533:2010 木地板.静负荷下弯曲强度的测定

This European Standard specifies methods of determining the bending strength of wood flooring under static load: a method with a static line load and a method with a static point load. The methods apply to wood flooring installed on a non-continuous support and thus assuming static loadbearing conditions.

Wood flooring. Determination of bending strength under static load. Test methods

EN 1533:2010 木地板.静负荷下弯曲强度的测定

This European Standard specifies methods of determining the bending strength of wood flooring under static load: a method with a static line load and a method with a static point load. The methods apply to wood flooring installed on a non-continuous support and thus assuming static load-bearing conditions.

Wood flooring - Determination of bending strength under static load - Test methods

DB44/T 781-2010 木龙骨

本标准规定了木龙骨的定义、分类、技术要求、试验方法、检验规则及标识、包装、运输和贮存等要求。 本标准适用于轻型木结构、建筑装修和景观工程骨架用木龙骨。

wooden keel

LST EN 1927-2-2008/AC-2010 软木圆材的质量分类 第2部分：松木

Qualitative classification of softwood round timber - Part 2: Pines

BS DD CEN/TS 13307-2:2009 非结构用层压和指形接合的木材坯件和半成品.产品控制

This Technical Specification specifies the method of control and tests for glue bond performance of lamination and finger jointing processes employed in the production of timber blanks and semi-finished profiles (products) for joinery applications. The methods of control are set out to ensure the durability of the glue line according to the service class. The specific requirements for dimensions, stability and moisture content are given in EN 13307-1.

Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Production control

BS DD CEN/TS 13307-2:2010 非结构用层压和指形接合的木材坯件和半成品 产品控制

Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses. Production control

DS/CEN/TS 13307-2:2010 非结构用途的层压和指接木材坯料和半成品型材 第2部分：生产控制

This Technical Specification specifies the method of control and tests for glue bond performance of lamination and finger jointing processes employed in the production of timber blanks and semi-finished profiles (products) for joinery applications. The methods of control are set out to ensure the durability of the glue line according to the service class.The specific requirements for dimensions, stability and moisture content are given in EN 13307-1.

Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control

DIN SPEC 1140:2010 非结构用途用分层和指形结合的木材半成品和半成剖面.第2部分:生产控制; 德文版本 CEN/TS 13307-2－2009

This Technical Specification specifies the method of control and tests for glue bond performance of lamination and finger jointing processes employed in the production of timber blanks and semi-finished profiles (products) for joinery applications. The methods of control are set out to ensure the durability of the glue line according to the service class.

Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control; German version CEN/TS 13307-2:2009

LY/T 1927-2010 集成材理化性能试验方法

本标准规定了集成材的理化性能试验方法。 本标准适用于非结构用集成材和结构用集成材。

Test method of evaluating the properties of glued-laminated timber

LY/T 1926-2010 抗菌木(竹)质地板.抗菌性能检验方法与抗菌效果

本标准规定了抗菌木(竹)质地板抗菌性能检验方法与抗菌效果分级、抗霉菌性能检验方法及效果分级。 本标准适用于抗菌木(竹)质地板的抗细菌性能和抗霉菌性能的检验。

Antimicrobial wood(bamboo)-based flooring.Test method for antimicrobial function and antimicrobial effect

LY/T 1923-2010 室内木质门

本标准规定了室内木质门的分类、要求、测量和检验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于采用实木或其他木质材料作为主要材料的室内木质门。不适用于防火门、防盗门等具有特殊功能的木质门。

Indoor wood-based door

ASTM D7032-10a 木塑复合材料铺板及护栏系统(防护装置或扶手)性能等级标准规范

1.1 This specification covers the procedures to establish a performance rating for wood-plastic composite (WPC) deck boards. This specification also defines the procedures to establish a performance rating for WPC guards and handrails. The purpose of this specification is to establish the basis for code recognition of these products or systems in exterior applications where combustible construction is allowed (see X1.1). Note 18212;While WPCs may contain wood fiber, the presence of wood fiber in the composite is not required by this standard. Other lignocellulosic materials may be used. For WPC deck boards and guardrail systems evaluated according to this standard, the structural, physical, and fire attributes may or may not exhibit similarity to those of wood due to the presence, type, and quantity of plastic(s) in the composite. WPCs should not be assumed to behave similarly to wood. For example, to address the influence of plastic in the composite, special considerations in the standard address sensitivity to temperature, ultraviolet (UV) exposure, and freeze-thaw resistance. 1.2 Deck boards, guards, and handrails covered by this specification are permitted to be of any code compliant shape and thickness (solid or non-solid). Note 28212;While WPCs are produced in a broad range of ratios of fiber to resin it is recognized that the performance requirements in this specification are valid for any material or combination of materials used as deck boards, guards, or handrails. For products made primarily from resin, or for products that exhibit highly plastic properties (for example, more than 3 % strain without rupture in a standard flexural test under ambient conditions), users are directed to Specification D6662 for additional guidance. 1.3 A deck board, and a deck board used as a stair tread, are assigned a span rating indicating its ability to comply with model code specified functions identified for its specific end use. A guard or handrail is recognized for its ability to meet minimum code requirements specified in the appropriate model building code. 1.4 Details of manufacturing processes may be proprietary and are beyond the scope of this specification.

Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

EN 1534:2010 木地板.耐刻痕的测定.试验方法

This European Standard specifies a method, derived from the test, for determining the resistance to indentation of wood flooring.

Wood flooring - Determination of resistance to indentation - Test method

ASTM D5055-10 确定和监控预制木制工字型木梁的结构能力的标准规范

1.1 General8212;This specification gives procedures for establishing, monitoring, and reevaluating structural capacities of prefabricated wood I-joists. Capacities considered are shear, reaction, moment, and stiffness. Procedures for establishing common details are given and certain design considerations specific to wood I-joists are itemized. 1.2 Contents of the Standard8212;An index and brief description of the main features of this specification are given in X1.1.1. 1.3 Development of the Standard8212;The development and intent of this specification is discussed in Appendix X1. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in 6.1.1.5.

Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

ASTM D6815-09 评估木材和木制品的载荷和蠕变作用时间的标准规范

1.1 This specification provides a procedure for testing and evaluating duration of load and creep effects of wood and wood-based materials relative to an accepted duration of load adjustment model. This specification was created for products that are currently covered by a consensus standard (for example, lumber, structural composite lumber, and structural-use panels). This procedure is intended to demonstrate the engineering equivalence to the duration of load and creep effects of visually graded lumber as specified in Practice D245 for a product under evaluation used in dry service conditions. This procedure is not intended to evaluate the performance of products under impact loading. Quantification of specific duration of load or creep factors is beyond the scope of this specification. For further guidance regarding the applicability of this specification refer to X1.1 in the Commentary. 1.2 Use of the procedure in this specification to determine equivalence to the Practice D245 duration of load relationship is limited to solid wood and wood-based products whose long term load behavior is similar to that of solid wood. Equivalence demonstrated in this specification is dependent upon evaluation of a product's 90-day (minimum) creep-rupture performance. In this evaluation, three criteria must be satisfied: (1) adequate strength over a 90-day period, (2) decreasing creep rate, and (3) limited fractional deflection. A summary of the development of these criteria and the underlying assumptions behind them is provided in the Commentary in Appendix X1 and Appendix X2. 1.3 Long term degradation phenomena not described by a creep-rupture model are not addressed in this specification (see Commentary X1.2.4).

Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

DIN 68702:2009 木块铺砌

Wood paving

LST EN 13226-2009 木地板 带凹槽和/或榫舌的实心镶木地板元件

Wood flooring - Solid parquet elements with grooves and/or tongues