79.080 半成品材 标准查询与下载



共找到 560 条与 半成品材 相关的标准,共 38

This European Standard specifies the characteristics of solid parquet elements with grooves and/or tongues for internal use as flooring. This standard is not applicable to panels made from elements for which a separate standard is in course of preparation. This standard covers elements with or without surface treatment.

Wood flooring - Solid parquet elements with grooves and/or tongues; English version of DIN EN 13226:2009-09

ICS
79.080
CCS
Q71
发布
2009-09
实施

This European Standard specifies the characteristics of solid parquet elements with grooves and/or tongues for internal use as flooring. This standard is not applicable to panels made from elements for which a separate standard is in course of preparation.This standard covers elements with or without surface treatment.

Wood flooring - Solid parquet elements with grooves and/or tongues

ICS
79.080
CCS
发布
2009-08-05
实施
2009-08-05

Wood flooring - Solid wood parquet elements with grooves and/or tongues.

ICS
79.080
CCS
Q71
发布
2009-08-01
实施
2009-08-29

This European Standard specifies the characteristics of solid parquet elements with grooves and/or tongues for internal use as flooring. This standard is not applicable to panels made from elements for which a separate standard is in course of preparation. This standard covers elements with or without surface treatment.

Wood flooring - Solid parquet elements with grooves and/or tongues

ICS
79.080
CCS
Q71
发布
2009-06-30
实施
2009-06-30

This document gives definitions, a classification and specifies the requirements for Laminated Veneer Lumber (LVL) for general purposes or for use in construction in dry, humid or exterior conditions.NOTE This standard will be called up in EN 13986 for construction applications.Annex A """"Evaluation of the bonding quality of laminated veneer lumber"""" is normativeInformation on supplementary properties is given in Annex B.

Laminated Veneer Lumber (LVL) - Definitions, classification and specifications

ICS
79.080
CCS
发布
2009-06-22
实施
2009-06-22

本标准规定了室内高湿场所用木地板的术语和定义、分类、要求、检验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于以木材或指接材经过加工制成,适用于桑拿房、浴室等高湿度环境的实木地板。

Wood flooring used in high humidity condition of indoors

ICS
79.080
CCS
Q71;B70
发布
2009-06-18
实施
2009-10-01

本标准规定了木制百叶窗帘和百叶窗用叶片的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于木制百叶窗帘和百叶窗用叶片(简称叶片),本标准不适用于胶合板和纤维板等人造板制叶片。

Slats of wooden blind and shutter

ICS
79.080
CCS
Q71
发布
2009-06-18
实施
2009-10-01

本标准规定了户外用木地板的术语和定义、分类、要求、检验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于以木材或指接材经过加工制成,适用于室外环境中使用但应避免长期长期浸泡在水中的木地板。

Wood decking used out-door

ICS
79.080
CCS
Q71;B70
发布
2009-06-18
实施
2009-10-01

本标准规定了软木饰面板的术语和定义、要求、分类、测量和试验方法、检验规则、包装、运输和贮存等。 本标准适用于栓皮栎(Quercus.variabilis Bl.)或类似树种的树皮经加工并施加胶粘剂制成的软木包饰面类板材。

Decorated cork board

ICS
79.080
CCS
Q71;B70
发布
2009-06-18
实施
2009-10-01

本标准规定了涂饰浸渍纸层压木质地板的术语和定义、分类、要求、检验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于涂饰浸渍纸层压木质地板。 本标准不适用于浸渍纸层压木质地板。

Coated laminate flooring

ICS
79.080
CCS
Q71;B70
发布
2009-06-18
实施
2009-10-01

本标准规定了仿古木质地板的术语和定义、分类、要求、检验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于仿古木质地板、仿古实木复合地板、仿古浸渍纸层压木质地板、仿古竹地板等仿古木质地板。

Antique style flooring

ICS
79.080
CCS
Q71;B70
发布
2009-06-18
实施
2009-10-01

This European Standard specifies the characteristics of solid parquet elements with grooves and/or tongues for internal use as flooring.This standard is not applicable to panels made from elements for which a separate standard is in course of preparation.This standard covers elements with or without surface treatment.

Wood flooring - Solid parquet elements with grooves and/or tongues

ICS
79.080
CCS
发布
2009-05-01
实施

This European Standard specifies a test method to determine the resistance to wear of lacquered wood floorings, a method to test the elasticity of the lacquer and a method to determine resistance to impact of lacquered wood floorings.

Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance

ICS
79.080
CCS
发布
2009-02-09
实施
2009-02-09

1.1 This specification provides a procedure for testing and evaluating duration of load and creep effects of wood and wood-based materials relative to an accepted duration of load adjustment model. This specification was created for products that are currently covered by a consensus standard (for example, lumber, structural composite lumber, and structural-use panels). This procedure is intended to demonstrate the engineering equivalence to the duration of load and creep effects of visually graded lumber as specified in Practice D245 for a product under evaluation used in dry service conditions. This procedure is not intended to evaluate the performance of products under impact loading. Quantification of specific duration of load or creep factors is beyond the scope of this specification. For further guidance regarding the applicability of this specification refer to X1.1 in the Commentary. 1.2 Use of the procedure in this specification to determine equivalence to the Practice D245 duration of load relationship is limited to solid wood and wood-based products whose long term load behavior is similar to that of solid wood. Equivalence demonstrated in this specification is dependent upon evaluation of a product's 90-day (minimum) creep-rupture performance. In this evaluation, three criteria must be satisfied: (1) adequate strength over a 90-day period, (2) decreasing creep rate, and (3) limited fractional deflection. A summary of the development of these criteria and the underlying assumptions behind them is provided in the Commentary in Appendix X1 and Appendix X2. 1.3 Long term degradation phenomena not described by a creep-rupture model are not addressed in this specification (see Commentary X1.2.4).

Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

ICS
79.080
CCS
发布
2009
实施

This standard provides minimum specifications for the quality and dimensions of naturally durable hardwood poles without preservative treatment to be used in single-pole utility structures. The poles described herein are considered as simple cantilever members subject to transverse loads only. Fiber stress values, provided as a basis for determining pole class sizes, apply only to poles that meet or exceed the minimum quality specifications.

Naturally Durable Hardwood Poles - Specifications and Dimensions

ICS
79.080
CCS
B69
发布
2009
实施

This Technical Specification specifies the method of control and tests for glue bond performance of lamination and finger jointing processes employed in the production of timber blanks and semi-finished profiles (products) for joinery applications. The methods of control are set out to ensure the durability of the glue line according to the service class. The specific requirements for dimensions, stability and moisture content are given in EN 13307-1.

Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control

ICS
79.080
CCS
发布
2009
实施

This European Standard specifies the characteristics of solid vertical and wide finger as well as Module brick including the laying units made of softwood or hardwood for internal use as flooring. This standard covers products without surface treatments.This standard covers also treated or untreated elements.

Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick

ICS
79.080
CCS
发布
2008-12-09
实施
2008-12-09

Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick

ICS
79.080
CCS
发布
2008-11-14
实施
2008-11-14

Wood flooring - Characteristics, evaluation of conformity and marking

ICS
79.080
CCS
发布
2008-09-30
实施
2008-09-30

本标准规定了居住建筑套内用木质楼梯的术语和定义、分类、要求、检验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于居住建筑套内组装式木质楼梯和木质部件。

Wooden stair for residential buildings

ICS
79.080
CCS
Q71;B70
发布
2008-09-03
实施
2008-12-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号