79.080 半成品材 标准查询与下载

EN 14762:2006 木地板.合格评估的抽样程序

This European Standard defines the sampling procedures to be used for the evaluation of conformity inproduct standards for a batch of wood flooring elements at the time of first delivery of the product.

Wood flooring - Sampling procedures for evaluation of conformity

PD CEN/TR 15314:2006 木材和木材产品耐久性.木材中季铵化合物的定量测定

Durability of wood and wood-based products - Quantitative determination of quaternary ammonium compounds in wood

EN 13307-1:2006 不作结构材料的木制坯件和半成品材.第1部分:要求

This European Standard specifies requirements for timber blanks and semi-finished profiles for non-structural uses, including glued laminated and glued finger jointed products. This Standard gives specific requirements for dimensions, stability and moisture content. This Standard applies to hardwood and to softwood for use in joinery.Production control requirements and tests are given in prCEN/TS 13307-2.

Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements

SNI 01-7210-2006 船舶建筑用材的种类

Types of ship building materials

EN 15146:2006 实心软木厚镶板层板.不带舌和槽的机加工形状

This European Standard defines the characteristics of solid wood panelling and cladding without tongue and groove on edges, machined from the following most common European species of softwood: spruce/fir, pine,larch, European Douglas fir and maritime pine.Products are intended for interior or exterior use.Coatings and finishings are not dealt with in this European Standard.NOTE products sold in the European Economic Area will have to comply with EN 14915.

Solid softwood panelling and cladding - Machined profiles without tongue and groove

LST 663-2005 圣诞树和装饰树枝 针叶树种 定性分类和维度

Christmas trees and ornamental branches. Coniferous tree species. Qualitative classification and dimensions

BS EN 14354:2005 木基板条 木制薄地板覆盖物

Wood-based panels - Wood veneer floor covering

BS EN 14354:2004 木基板条.木制薄地板覆盖物

This document specifies definitions, requirements and test methods for wood veneer floor coverings for internal use. It gives guidance for the evaluation of conformity of the products to the requirements of this standard. Wood-veneer floor coverings without finishing are excluded.

Wood-based panels - Wood veneer floor covering

ASTM D2394-05 木地板和木地板的模拟使用试验的标准方法

The test methods presented herein are intended to provide both a factual and comparative means of appraising the suitability of finish flooring. The procedures developed simulate some conditions of use that may require either maintenance beyond that considered normal or replacement of the floor surface material. It is important for some of the evaluations that the substrate to be used beneath the finish flooring be duplicated because the type and degree of support will have a direct influence on the value obtained from test. For example, in some present-day construction, low-density materials are used for sound-deadening immediately below the finish flooring. The way this substrate distributes loading and absorbs energy will have an influence on evaluations such as those in rolling and concentrated loads. The test methods presented herein may be used to compare different finish floorings as to their resistance to severe and ordinary service loads and also may serve as the means to set specification limits. The properties obtained by these test methods are needed in addition to such basic material properties as stiffness, strength, hardness, and dimensional stability. Not all test may be required for any specific investigation. There may be an interrelation between two tests, and when it has been demonstrated what the interrelation is, a complete evaluation will only be required as a final stage of a study. In each instance, therefore, it will be necessary to determine which evaluations should be made to fulfill the objectives. 1.1 These test methods cover procedures for measuring the performance of finish flooring under the following service loadings and conditions:

Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring

CAN/CSA-O15-2005(C2009) 公共服务森林中的花园和花园

1 Domaine d'application 1.1 Cette norme énonce les exigences relatives aux matériaux, à la fabrication et aux dimensions des différentes classes de poteaux et poteaux renforts en bois séché destinés principalement aux lignes de transport d'énergie électrique et de télécommunications. 1.2 Cette norme ne vise pas les poteaux en bois destinés à des structures telles que les ponts et les bâtiments. 1.3 Cette norme ne vise pas le traitement de préservation des poteaux ni le conditionnement de ceux-ci avant le traitement. Sauf indication contraire, ces exigences sont prescrites dans la série de normes CSA O80. 1.4 Dans les normes CSA, le terme «doit» indique une exigence, c'est-à-dire une prescription que l'utilisateur doit respecter pour assurer la conformité à la norme; «devrait» indique une recommandation ou ce qu'il est conseillé mais non obligatoire de faire et «peut» une possibilité ou un conseil. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent à séparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes peuvent être normatives (obligatoires) ou informatives (facultatives).

Poteaux et poteaux renforts en bois pour les services publics

DIN EN 14342:2005 木制楼板.特性、合格评价和标记

Wood flooring - Characteristics, evaluation of conformity and marking; German version EN 14342:2005

NF B54-030:2005 木质板材.木制薄板楼板覆盖物

Wood-based panels - Wood veneer floor covering.

LST EN 14354-2005 人造板 木饰面地板覆盖物

Wood-based panels - Wood veneer floor covering

DS/EN 14354:2005 人造板 木饰面地板覆盖物

This European standard specifies definitions, requirements and test methods for wood veneer floor coverings for internal use.

Wood-based panels - Wood veneer floor covering

DB44/T 248-2005 桉树造纸木片

本标准规定了造纸用按树木片加工生产的技术规范、产品质量、检验方法、储存和运输等要求。本标准适用于按树造纸用木片的生产、加工及贸易．其它阔叶树造纸用木片可参照执行。

Wood Chips of Eucalyptus for the Pulp

DIN EN 14354:2005 木质板条.木质薄板地板覆盖物

Wood-based panels - Wood veneer floor covering; German version EN 14354:2004

CAN/CSA-O15-2005(R2009) 木质电线杆和加固桩

1 Scope 1.1 This Standard covers material, manufacturing, and class dimensional requirements for seasoned wood poles and reinforcing stubs that are primarily intended for the support of electrical power or communication lines. 1.2 This Standard does not cover requirements for wood poles intended for use in structures such as bridges and buildings. 1.3 This Standard does not cover requirements for the preservative treatment of poles or the conditioning of poles prior to treatment. Such requirements are detailed in the CSA O80 Series of Standards unless otherwise specified. 1.4 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Wood Utility Poles and Reinforcing Stubs

GOST R 52484-2005 纪念火柴.通用规范

Souvenir matches. General specifications

EN 14519:2005 实心软木板和涂覆层.带舌状物和凹槽的机械轮廓

This European Standard specifies the characteristics of solid wood panelling and cladding with tongue and groove machined from the following most common European species of softwood: spruce/fir, pine, larch, European Douglas Fir and maritime pine. Products are intended for interior or exterior use. NOTE Products sold in the European Economic Area should comply with prEN 14915.

Solid softwood panelling and cladding - Machined profiles with tongue and groove

LY/T 1614-2004 实木集成地板

本标准规定了实木集成地板的定义、分类、技术要求、检验方法、检验规则以及标志、包装、运输和贮存的要求。 本标准适用于3.1中所定义的实木集成地板。

Glued laminated timber flooring