79.080 半成品材 标准查询与下载

ISO 5320:1980 实木拼花地板 冷杉和云杉木条的分类

Divides the blocks by quality into the three grades (+++), (++), and (+) corresponding to the conditions stated in the tables. Refers to a protection treatment to the parts of the strips liable to be attacked by insects. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 1027.

Solid wood parquet; Classification of fir and spruce strips

NF B54-011:1980 木材.饰面用硬木胶合板的分类和制造

Timber. Manufacture and classification of counter bonded parquet flooring for facing made from broad leared wood.

NF B51-022:1979 木材.组装.多榫接头连接.拉力试验

Wood. Assembly. Multiple finger joints. Tensile test.

NF B51-021:1979 木材.组装.多榫接头连接.弯曲试验

Wood. Assembly. Multiple finger joints. Flexion test.

GOST 2996-1979 飞机用阔叶树种毛坯.规范

Настоящий стандарт распространяется на заготовки лиственных пород, предназначенные для изготовления деревянных деталей самолетов, верт

Blanks of broad-leaved species for aviation. Specifications

NF B54-008:1978 木材.镶嵌拼花地板的制造和分类

Timber. Manufacture and classification of mosaic parquet panels.

NF B54-001:1978 木材.橡木拼花地板条的分类

Timber. Classification of solid oak parquet strips.

ISO 5327:1978 实木铺面木块 一般特性

Specifies manufacture, dimensions, tolerances and the inspection and delivery conditions and marking. The common and special shapes are shown in figures. Applies to blocks used for paving covered (indoor) and open (outdoor) spaces. Describes the methods of protection treatment.

Solid wood paving blocks; General characteristics

ISO 5334:1978 实木拼花地板 海岸松木条的分类

Divides the non-assembled strips by quality into the three grade (+++), (++), and (+) corresponding to the conditions stated in the tables. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 1027.

Solid wood parquet; Classification of maritime pine strips

ISO 5326:1978 实木铺面木块 硬质材铺面木块 质量要求

Applies to paving used for covered (indoor) and open (outdoor) spaces. Blocks made of Fagus sylvatica wood are intended for use in covered spaces only. The permissible wood or sawing defects are listed in a table.

Solid wood paving blocks; Hardwood paving blocks; Quality requirements

ISO 5328:1978 实木铺面木块 软质材铺面木块 质量要求

Applies to paving used for covered (indoor) and open (outdoor) spaces. The permissible wood or sawing defects and corresponding acceptance conditions are listed in a table.

Solid wood paving blocks; Softwood paving blocks; Quality requirements

BS 4050-1:1977 马赛克镶木地板规范 一般特征

Manufacture, inspection, delivery, marking of mosaic panels of any species of wood.

Specification for mosaic parquet panels. General characteristics

CSA O122-1977 结构胶合木

Structural Glued-Laminated Timber

ISO/FDIS 4562 实木拼花条 分类

Wood parquet strips — Classification

ISO/FDIS 4561 木材原料元素分类

Wood raw elements — Classification

ISO/FDIS 4556 原木镶木地板元件 — 一般特性

Wood raw parquet elements — General characteristics

GOST 12457-1977 架橹用的木坯料.技术条件

Настоящий стандарт распространяется на заготовки хвойных и лиственных пород, предназначенные для изготовления весел морских, речных, про

Wood blanks for oars. Specifications

ISO 2457:1976 实木拼花地板 山毛榉木的分类

Divides non-assembled strips into two quality grades that are identified by (+++) and (++) corresponding to the conditions specified in the tables. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 1072. Replaces the first edition from 1972.

Solid wood parquet; Classification of beech strips

ISO 631:1975 镐嵌地板 一般特性

These panels of any species of wood are assemblies made from wood fingers of a parallelepiped rectangular shape, forming component squares laid in a chequered pattern; they are intended to be bonded (or sealed) to a supporting base, either directly or over an interlayer of adequate material. Specified are dimensions, permissible deviations, etc., the inspection and delivery conditions and marking.

Mosaic parquet panels; General characteristics

ISO 1072:1975 实木拼花地板 一般特性

Specified are cross-section, dimensions, permissible deviations, etc., the inspection and delivery conditions and the marking of strips with rectangular face of any species of wood. They are manufactured in three different profiles, calles respectively: types P1 (variants A and B), P2 and P3, the dimension characteristics of which are given in tables and shown in figures.

Solid wood parquet; General characteristics