79.100 软木和软木制品 标准查询与下载

BS ISO 2385:1993 软木厚板、原软木、软木清洁剂、软木片、软木屑及软木废渣.湿度测定取样

This International Standard applies to packed cork and specifies the method of sampling corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste.

Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste - Sampling to determine moisture content

BS ISO 2385:1994 软木厚板、原软木、软木清洁剂、软木片、软木屑及软木废渣 湿度测定取样

Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste. Sampling to determine moisture content

ISO 2385:1993 软木厚板、原软木、碎料、软木塞、软木废物和软木残渣 水分含量测定取样

Specifies the sampling method (elementary sampling, gross sample, reduced sample, laboratory samples) in detail and the sampling report.

Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste; sampling to determine moisture content

BS ISO 1997:1993 粒状软木和软木粉.分类、性能和包装

Specifies classification by grain size, classification by bulk density, designation, moisture, cork powder content, packing in bales, sacks or cartons, marking.

Granulated cork and cork powder - Classification, properties and packing

ISO 1997:1992 粒状软木和软木粉 分类、性质和包装

Specifies classification by grain size, classification by bulk density, designation, moisture, cork powder content, packing in bales, sacks or cartons, marking.

Granulated cork and cork powder; classification, properties and packing

ISO 2031:1991 粒状软木 体积密度的测定

Specifies the apparatus, the preparation and number of samples, and the test procedure; describes the expression of results and the contents of the test report. This second edition cancels and replaces the first edition (1972).

Granulated cork; determination of bulk density

ISO 9727:1991 圆形天然软木塞 物理试验 参照方法

Specifies the reference methods for determining the following characteristics of theses stoppers: dimensions; deviations from parallelism of bases and from perpendicularity of sides and bases; apparent density; moisture content,; behaviour under compression; extraction and penetration strengths; absorption; and capillarity. Sealing behaviour will be covered later. Contains sampling, reagents, apparatur, test conditions, various tests and test report.

Cylindrical stoppers of natural cork; physical tests; reference methods

ISO 1216:1990 木板用软木.分级、分类和包装

Corkwood in planks — Grading, classification and packing

ISO 2219:1989 热绝缘用的膨胀纯集成软木 特性、取样和包装

Specifies the characteristics (i.e. finish, dimensions, modulus of rupture and thermal conductivity) of slabs and panels used as non-visible thermal insulation and describes the relevant methods. Is applicable to materials used at temperatures not exceeding 105 鳦.

Expanded pure agglomerated cork for thermal insulation; characteristics, sampling and packaging

ISO 8724:1989 软木装饰板 规格

Applies to panels intended for covering internal walls which may be grouped into five classes according to their constitution (siehe ISO 633). Specifies the following characteristics: dimensions, squareness and straightness of edges, moisture content, handling behaviour, resistance to boiling water and resistance of glued joint which shall in the classes IV and V not show any unglueing when tested in accordance with Annex A.

Cork decorative panels; specification

ISO 2510:1989 砖瓦用清音复合软木

The definitions given in ISO 633 and herein apply. Checking of the dimensions of the tiles shall be carried out in accordance with the method described in ISO 7322. The characteristics and presentation and finish are specified and sampling, packing and marking described.

Sound-reducing composition cork in tiles

ISO 2509:1989 砖瓦用吸音膨胀纯集成软木

For the purpose of this standard the definitions in ISO 633 and the definition given herein apply. The tiles shall be tested as specified in ISO 354 taking into account particulars which are defined. Constitutes a technical revision of the first edition.

Sound-absorbing expanded pure agglomerated cork in tiles

ISO 2067:1988 粒状软木.取样

Granulated cork — Sampling

ISO 9148:1987 装饰用成卷复合软木条 试验方法

Specifies the following characteristics: dimensions, tensile strength, flexibility, moisture content, and resistance to boilding water. In general apparatus and procedure are similar to those described in ISO 7322. Dimensions (or masses) and the number of test pieces are indicated in a table.

Composition cork in rolls for decoration; Test methods

ISO 9149:1987 装饰用成卷复合软木条 规格

Specifies dimensions and their permissible deviations, tensile strength, flexibility, moisture content, and resistance to boilding water for materials tested in accordance with ISO 9148. Fixes the kind of packaging and related marking.

Composition cork in rolls for decoration; Specifications

ISO 3813:1987 结块软木地板砖.特性 取样和包装

Floor tiles of agglomerated cork — Characteristics, sampling and packing

ASTM F147-87(2017) 非金属衬垫材料柔韧性的标准试验方法

4.1 This test method is designed to measure the ability of non-metallic gasket materials to withstand handling, as would be encountered before and during installation of cut gaskets. 1.1 This test method covers the determination of the flexibility of non-metallic gasket materials. It is designed for testing specimens cut from sheet goods or from the gasket in the finished form, as supplied for commercial use. Materials normally classified as rubber compounds are excluded since they are covered in Classification D2000. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Flexibility of Non-Metallic Gasket Materials

ISO 2189:1986 膨胀纯集成软木 体积密度的测定

Specifies a method the principle of which consists in measuring the dimensions of a test piece and determining its dried mass. The apparatus consists of electric disc saw, metal ruler and vernier caliper. Sampling shall be carried out in accordance with ISO 2219.

Expanded pure agglomerated cork; Determination of bulk density

ISO 1215:1986 商品干燥原软木、软木栓皮碎料、软木废物和软木残渣 定义和包装

Applies to material defined in ISO 633 the moisture content of which is not higher than 14 % as determined in accordance with ISO 2386. Gross mass of bales is the size of commercially dry cork including packaging. The type of cork and the name of the exporting country shall be indicated on the bales.

Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste; Definitions and packaging

ISO 1215:1980 商业干燥的原始软木 拉马塞奇 采摘物 软木废料和软木废料.定义和包装

Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Definitions and packaging