81.060.20 陶瓷制品 标准查询与下载

ASTM C849-88(2011) 卫生陶瓷努氏压痕硬度的试验方法

The Knoop indentation hardness is one of many properties that is used to characterize ceramic whitewares. Attempts have been made to relate Knoop indentation hardness to tensile strength, grinding speeds, and other hardness scales, but no generally accepted methods are available. Such conversions are limited in scope and should be used with caution, except for special cases where a reliable basis for the conversion has been obtained by comparison tests.1.1 This test method covers the determination of the Knoop indentation hardness of ceramic whitewares and the verification of Knoop indentation hardness testing machines using standard glasses. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares

ASTM C408-88(2011) 卫生陶瓷制品传热性的试验方法

This test method provides information useful in understanding and quantifying such parameters as thermal shock resistance and ability to conduct or dissipate heat.1.1 This test method covers a general procedure for determining the thermal conductivity of whiteware ceramics over the temperature range from 100 to 300°F (40 to 150°C). 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) units given in parentheses are for information purposes only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Thermal Conductivity of Whiteware Ceramics

ASTM C848-88(2016) 用于共振白瓷餐具的杨氏模量, 剪切模量和泊松比的标准试验方法

3.1 This test system has advantages in certain respects over the use of static loading systems in the measurement of ceramic whitewares. 3.1.1 Only minute stresses are applied to the specimen, thus minimizing the possibility of fracture. 3.1.2 The period of time during which stress is applied and removed is of the order of hundreds of microseconds, making it feasible to perform measurements at temperatures where delayed elastic and creep effects proceed on a much-shortened time scale. 3.2 This test method is suitable for detecting whether a material meets specifications, if cognizance is given to one important fact: ceramic whiteware materials are sensitive to thermal history. Therefore, the thermal history of a test specimen must be known before the moduli can be considered in terms of specified values. Material specifications should include a specific thermal treatment for all test specimens. 1.1 This test method covers the determination of the elastic properties of ceramic whiteware materials. Specimens of these materials possess specific mechanical resonance frequencies which are defined by the elastic moduli, density, and geometry of the test specimen. Therefore the elastic properties of a material can be computed if the geometry, density, and mechanical resonance frequencies of a suitable test specimen of that material can be measured. Young’s modulus is determined using the resonance frequency in the flexural mode of vibration. The shear modulus, or modulus of rigidity, is found using torsional resonance vibrations. Young’s modulus and shear modulus are used to compute Poisson’s ratio, the factor of lateral contraction. 1.2 All ceramic whiteware materials that are elastic, homogeneous, and isotropic may be tested by this test method.2 This test method is not satisfactory for specimens that have cracks or voids that represent inhomogeneities in the material; neither is it satisfactory when these materials cannot be prepared in a suitable geometry. Note 1: Elastic here means that an application of stress within the elastic limit of that material making up the body being stressed will cause an instantaneous and uniform deformation, which will cease upon removal of the stress, with the body returning instantly to its original size and shape without an energy loss. Many ceramic whiteware materials conform to this definition well enough that this test is meaningful. Note 2: Isotropic means that the elastic properties are the same in all directions in the material. 1.3 A cryogenic cabinet and high-temperature furnace are described for measuring the elastic moduli as a function of temperature from8201;−195 to 1200°C. 1.4 Modification of the test for use in quality control is possible. A range of accepta......

Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance

JIS R 1402:1987 热电偶用非金属绝缘管

この規格は，熱電対に用いる磁器質の非金属絶縁管(以下，絶緑管という。)について規定する.

Non-metallic insulating tubes for thermocouples

IPC TM-650 2.1.1.1-1987 陶瓷基板微部分

IPC Standards and Publications are designed to serve the public interest through

Microsectioning, Ceramic Substrate

CSN 72 5523-1984 家用瓷器．耐酸性测定

Schválení ST SEV 4025-83 doporu?ilo ministerstvo pr?myslu ?SR. Zpracovatel: Karlovarsk? porcelán, o. p., Karlovy Vary - Stará Role -Alois ?mídl Pracovník ??adu pro normalizaci a mě?ení - Ing. Milena Veselá

Household china. Determination of acid resistance

CNS 903-1983 搪瓷器皿检验法

本标准规定于以钢板经压制或焊接制成为器坯，并敷以搪瓷层经烧制而成之一般用搪瓷器皿之检验法。

Method of Test for Enamel Ware

CNS 10379-1983 搪瓷（珐琅及景泰蓝）制品放射性试验法

本标准规定以金属材料（包括合金）经压制或焊接制成为器坯，并敷以珐琅釉烧制而成之制品放射性检验法。

Method of Test for Radiation of Enamel (and Cloisonne) Products

ASTM C584-81(2011) 卫生陶瓷器具和有关制品的透光光泽度的试验方法

This test method provides a means of establishing specular gloss limits for bright, semi-mat, and mat glazed surfaces. It is realized that specular gloss measurements do not always correlate well with visual rankings of glossiness because specular gloss is only one of several related appearance attributes that produce the sensation of gloss. However, the prescribed test method is of sufficient accuracy for the intended purpose. Note 18212;If a greater degree of distinction between bright glazed surfaces is desired, the 20° geometry instrument will provide it. 1.1 This test method covers the determination of 60° specular gloss of glazed ceramic whitewares and related products. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products

GOST 473.11-1981 耐化学和耐热的陶瓷制品.冲击韧性测定方法

Настоящий стандарт устанавливает метод определения ударной вязкости химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic ware. The method for determination of resilience

GOST 473.10-1981 耐化学耐热陶瓷制品.釉面耐化学性能测定方法

Настоящий стандарт устанавливает метод определения химической стойкости глазури химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic ware. The method for determination of glaze chemical resistance

GOST 473.9-1981 耐化学耐热陶瓷制品.液压试验法

Настоящий стандарт устанавливает метод испытания гидравлическим давлением химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic ware. The method of testing by hydraulic pressure

GOST 473.8-1981 耐化学和耐热的陶瓷制品.抗静弯极限强度测定法

Настоящий стандарт устанавливает метод определения предела прочности при статическом изгибе химически стойких и термостойких керамичес

Chemically resistant and heat resistant ceramic ware. The method for determination of static bending strength

GOST 473.7-1981 耐化学耐热陶瓷制品.抗拉强度测定方法

Настоящий стандарт устанавливает метод определения предела прочности при разрыве химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic wapes. The method for determination of tensile strength

GOST 473.6-1981 耐化学耐热陶瓷制品.抗压强度测定方法

Настоящий стандарт устанавливает метод определения предела прочности при сжатии химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic wares. The method for determination of compression strength

GOST 473.5-1981 耐化学和耐热的陶瓷制品.耐热性测定法

Настоящий стандарт устанавливает метод определения термической стойкости химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance

GOST 473.4-1981 钒基合金及合金元素.硅的测定方法

Настоящий стандарт устанавливает метод определения кажущейся плотности и кажущейся пористости химически стойких и термостойких керамич

Vanadium base alloys and alloying elements. Methods for determination of silicon

GOST 473.3-1981 耐化学和耐热的陶瓷制品.吸水性测定法

Настоящий стандарт устанавливает метод определения водопоглощения химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic wares. The method determination of water absorption

GOST 473.2-1981 耐化学耐热陶瓷制品.耐碱性测定方法

Настоящий стандарт устанвливает метод определения щелочестойкости химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic wares. The method for determination of alkali resistance

GOST 473.1-1981 耐化学耐热陶瓷制品.耐酸性测定方法

Настоящий стандарт устанвливает метод определения кислостойкости химически стойких и термостойких керамических изделий

Chemically resistant and heat resistant ceramic wares. The method for determination of acid resistance