81.060.30 高级陶瓷 标准查询与下载
共找到 1685 条与 高级陶瓷 相关的标准，共 113 页
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-31
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-31
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-31
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-20
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-20
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-20
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-20
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-20
- 实施
Determination of thermal diffusivity of fine ceramic films by pulsed light heating thermoreflectance method
- ICS
- 81.060.30
- CCS
- Q32;A29
- 发布
- 2018-12-20
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature
- ICS
- 81.060.30
- CCS
- 发布
- 2018-12-20
- 实施
Determination of interfacial thermal resistance between fine ceramic film and metal film
- ICS
- 81.060.30
- CCS
- Q32;A29
- 发布
- 2018-12-20
- 实施
What is this ISO 17167 - Mechanical properties of monolithic ceramics at room temperature about? ISO 17167 helps you by proving the test method for determining the flexural strength of monolithic ceramics at room temperature. ISO 17167 specifies a method for the determination of the nominal equibiaxial flexural strength by the ring-on-ring test of advanced monolithic technical ceramic materials at room temperature. This ring-on-ring test is intended to be used for material development and characterization, quality control and design data acquisition purposes. The strength level determined by the test is calculated based on linear elastic bending behaviour of a round, disk-like thin plate on the assumption that the material being tested is elastically homogeneous and isotropic and shows a linear (Hooke) stress-strain behaviour.
Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of monolithic ceramics at room temperature. Determination of flexural strength by the ring-on-ring test
- ICS
- 81.060.30
- CCS
- 发布
- 2018-11-30
- 实施
- 2018-11-30
1 、外观质量 对蜂窝中空板式陶瓷膜的外观质量作了具体规定，以便于设计选用。 2、尺寸偏差及变形 对蜂窝中空板式陶瓷膜的尺寸允许偏差及变形作了具体规定。 3、蜂窝中空板式陶瓷膜的理化性能 《蜂窝中空板式陶瓷膜》标准中对直接决定其使用性能和效果的孔径、显气孔率、抗压强度、抗弯强度、耐酸性能、耐碱性能、耐苯腐蚀性能、抗热震性八项指标作出了具体规定。 《蜂窝中空板式陶瓷膜》标准中规定了孔径、显气孔率、抗压强度、抗弯强度、耐酸性能、耐碱性能、耐苯腐蚀性能、抗热震性八项指标的测试方法。孔径按HY/T 064《管式陶瓷微孔滤膜测试方法》的规定进行检测，显气孔率按GB/T 1966《多孔陶瓷显气孔率、容重试验方法》的规定进行检测，抗压强度按GB/T 1964《 多孔陶瓷压缩强度试验方法》的规定进行检测，抗弯强度按GB/T 1965 《 多孔陶瓷弯曲强度试验方法》的规定进行检测， 耐酸性能、耐碱性能按GB/T 1970 《多孔陶瓷耐酸、碱腐蚀性能试验方法》的规定进行检测，耐苯酚腐蚀性能按本标准规定检测，抗热震性按GB/T 25994 《 蜂窝陶瓷》的规定进行检测。 对蜂窝中空板式陶瓷膜理化性能要求作出了具体规定，这就有利于生产技术条件较弱的厂家要调整配方、改进工艺和设备，提高产品的质量水平，以满足产业发展的要求。
Honey comb insulating plate-type ceramic membrane
- ICS
- 81.060.30
- CCS
- C307
- 发布
- 2018-11-28
- 实施
- 2018-11-28
This document specifies a method for the determination of the nominal equibiaxial flexural strength by the ring-on-ring test of advanced monolithic technical ceramic materials at room temperature. This document is applicable to materials with a grain size less than 100 µm.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of monolithic ceramics at room temperature — Determination of flexural strength by the ring-on-ring test
- ICS
- 81.060.30
- CCS
- 发布
- 2018-11-08
- 实施
本标准规定了氧化锌铝磁控溅射靶材的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺等。 本标准适用于粉末冶金生产的用于磁控溅射沉积节能Low-E玻璃的功能介质层以及薄膜太阳能电池透明电极层等膜层的氧化锌铝磁控溅射靶材。
Alumium doped zinc oxide magnetron sputtering targets
- ICS
- 81.060.30
- CCS
- C305
- 发布
- 2018-10-19
- 实施
- 2019-02-27
1 Scope This document specifies a test method for the determination of the air-purification performance, with regards to removal of acetaldehyde, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination from indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form, and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of other performance attributes of photocatalytic materials, i.e. decomposition of water contaminants, self-cleaning, antifogging and antibacterial actions.
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Removal of acetaldehyde
- ICS
- 81.060.30
- CCS
- 发布
- 2018-09-30
- 实施
- 2018-09-30
1 Scope This document specifies a test method for the determination of the air-purification performance, with regards to the removal of toluene, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination from indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form, and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of other performance attributes of photocatalytic materials, i.e. decomposition of water contaminants, self-cleaning, antifogging and antibacterial actions.
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Removal of toluene
- ICS
- 81.060.30
- CCS
- 发布
- 2018-09-30
- 实施
- 2018-09-30
1 Scope This document specifies a test method for the determination of the air-purification performance, with regards to the removal of formaldehyde, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination from indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form, and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of other performance attributes of photocatalytic materials, i.e. decomposition of water contaminants, self-cleaning, antifogging and antibacterial actions.
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Removal of formaldehyde
- ICS
- 81.060.30
- CCS
- 发布
- 2018-09-30
- 实施
- 2018-09-30
1 Scope This document specifies a test method for the determination of the air purification performance, with regards to removal of nitric oxide, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination from indoor light . This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to certain test pieces that contain a large amount of adsorbent, due to unattained adsorption equilibrium. This document does not apply to powder or granular photocatalytic materials . This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of other performance attributes of photocatalytic materials , i.e. decomposition of water contaminants, self-cleaning, antifogging and antibacterial actions.
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Removal of nitric oxide
- ICS
- 81.060.30
- CCS
- 发布
- 2018-09-30
- 实施
- 2018-09-30
1 Scope This document specifies a test method for the determination of the air-purification performance, with regards to removal of methyl mercaptan, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination with indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form, and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of other performance attributes of photocatalytic materials, i.e. decomposition of water contaminants, self-cleaning, antifogging and antibacterial actions.
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Removal of methyl mercaptan
- ICS
- 81.060.30
- CCS
- 发布
- 2018-09-30
- 实施
- 2018-09-30
