83.040.30 塑料的辅料和添加剂 标准查询与下载

DS/EN 14469-2:2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）着色材料的试验 第2部分：试样的制备

This Part of EN 14469 specifies a procedure for preparing test samples for the testing of colouring materials in plasticized polyvinyl chloride (PVC-P) mateials.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens

BS EN 14469-1:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.组分和基本混合料的制备

This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials in plasticized polyvinyl chloride (PVC-P) materials, together with the composition of these basic mixtures. It distinguishes between: - basic mixture A (transparent basic mixture) - basic mixture B (white basic mixture) note:1) For definition of colouring material, see EN 971-1.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Composition and preparation of basic mixtures

BS EN 14469-4:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.着色剂扩散的测定

This Part of EN 14469 specifies a method of establishing and evaluating quantitatively the bleeding of pigments from sheets of coloured PVC-P into material of the same kind brought into contact with them. It also sets out the way in which specimens prepared in accordance with EN 14469-2 shall be tested. NOTE It can also be used to determine bleeding from other polymers into white PVC-P. This Part of EN 14469 does not deal with pigment blooming (see also annex A (informative)).

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Determination of bleeding of colouring materials

BS EN 13900-4:2004 颜料和填充剂.扩散方法和在塑料中可扩散性的评定.用双辊研磨机测定聚乙烯中白颜料的颜色性能和易扩散性

This Part of EN 13900 specifies a method of determining the colouristic properties of a test pigment in polyethylene (PE) relative to a standard, and the ease of dispersion DHPE of pigments from the differences in tinting strength of dispersing colouring materials under various conditions. The method is appropriate for use with white pigments. The ease of dispersion determined in this way is valid only for the dispersion equipment, dispersion conditions and dispersion medium being used. The use of test conditions differing from those specified can give different results; this applies both to the absolute magnitude and to the relation between values of the ease of dispersion of various pigments. The subscript DHPE is therefore used to designate the value obtained as specified in this Part of EN 13900.

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling

BS EN 14469-2:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.试样的制备

This Part of EN 14469 specifies a procedure for preparing test samples for the testing of colouring materials in plasticized polyvinyl chloride (PVC-P) materials. It describes the manner in which basic mixtures as defined in EN 14469-1 and pigments and pigment preparations are to be used to prepare test samples for the testing of particular pigment properties. The standard is applicable to inorganic and organic pigments, and also to pigment preparations in powder, paste or granular form (see annex A (informative)). note:1) For definition of colouring material, see EN 971-1.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Preparation of test specimens

BS EN 14469-3:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.白颜料的相对染色力测定

This Part of EN 14469 specifies a procedure for determining the relative tinting strength of white pigments in plasticized polyvinyl chloride (PVC-P) at identical concentration of the white pigments by mass. To this end, the white pigments are incorporated into the basic mixture A (see EN 14469-1) together with a carbon black pigment preparation.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Determination of the relative tinting strength of white pigments

EN 14469-1:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.第1部分:组分和基本混合料的制备

This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials1) in plasticized polyvinyl chloride (PVC-P) materials, together with the composition of these basic mixtures.It distinguishes between:- basic mixture A (transparent basic mixture)- basic mixture B (white basic mixture)

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures

EN 14469-2:2004 颜料和补充剂.增塑聚氯乙烯中着色剂的试验.第2部分:试验样品的制备

This Part of EN 14469 specifies a procedure for preparing test samples for the testing of colouring materials1) in plasticized polyvinyl chloride (PVC-P) materials. It describes the manner in which basic mixtures as defined in EN 14469-1 and pigments and pigment preparations are to be used to prepare test samples for the testing of particular pigment properties. The standard is applicable to inorganic and organic pigments, and also to pigment preparations in powder, paste or granular form (see annex A (informative)).

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens

EN 13900-4:2004 颜料和稀释剂.扩散方法和在塑料中可扩散性的评估.第4部分:由双滚研磨机测定聚乙烯中的白颜料的颜色性能和易扩散性

This Part of EN 13900 specifies a method of determining the colouristic properties of a test pigment in polyethylene (PE) relative to a standard, and the ease of dispersion DHPE of pigments from the differences in tinting strength of dispersing colouring materials under various conditions.The method is appropriate for use with white pigments.The ease of dispersion determined in this way is valid only for the dispersion equipment, dispersion conditions and dispersion medium being used. The use of test conditions differing from those specified can give different results; this applies both to the absolute magnitude and to the relation between values of the eas

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polythylene by two-roll milling

EN 14469-4:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.第4部分:着色剂扩散的测定

This Part of EN 14469 specifies a method of establishing and evaluating quantitatively the bleeding of pigments from sheets of coloured PVC-P into material of the same kind brought into contact with them. It also sets out the way in which specimens prepared in accordance with EN 14469-2 shall be tested. This Part of EN 14469 does not deal with pigment blooming (see also annex A (informative)).

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials

EN 14469-3:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的试验.第3部分:白颜料相对染色强度的测定

This Part of EN 14469 specifies a procedure for determining the relative tinting strength of white pigments in plasticized polyvinyl chloride (PVC-P) at identical concentration of the white pigments by mass. To this end, the white pigments are incorporated into the basic mixture A (see EN 14469-1) together with a carbon black pigment preparation.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments

NF T31-310-3:2003 颜料和填充剂.扩散方法和在塑料中可扩散性的评估.第3部分:用两辊磨测定色彩特点和黑色及彩色颜料在聚乙烯中的易扩散性

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3 : determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling.

NF T31-310-1:2003 颜料和填料.塑料制品的色散方法和色散性的评估.第1部分:一般导言

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1 : general introduction.

NF T31-310-2:2003 颜料和填充剂.扩散方法和在塑料中可扩散性的评估.第2部分:用两辊磨测定色彩特点和在增塑聚氯乙烯中的易扩散性

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2 : determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling.

KS M ISO 1043-3:2003 塑料.符号和缩略语.第3部分:增塑剂

1.1 이 규격은 가소제에 관한 용어의 약어 구성시 사용되는 공통 기호를 규정하며, 일

Plastics-Symbols and abbreviated terms-Part 3 : Plasticizers

ASTM D4890-98(2003) 聚氨酯原材料的标准试验方法:多元醇加德纳和APHA颜色的测定

Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

DIN EN 13900-1:2003 颜料和填料.扩散方法和在塑料中可扩散性的评估.第1部分:概述

This part of EN 13900 provides an introduction to the various parts of EN 13900 which describe methods for dispersing pigments and extenders in plastics materials in order to determine their dispensibility. Methods of assessing the ease of dispersion are described in the subsequent parts of EN 13900. The various procedures described permit comparisons to be made between similar pigments (for example between a test sample and an agreed reference pigment).

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction; German version EN 13900-1:2003

DIN EN 13900-2:2003 颜料和填料.扩散方法和在塑料中可扩散性的评估.第2部分:用两辊研磨测定色彩特点和在增塑聚氯乙烯中的易扩散性

This part of EN 13900 specifies a method of determining the ease of dispersion DH/PVC-P of pigments from the differences in colour strength on dispersing colouring materials under various conditions in plasticized polyvinyl chloride (PVC-P) compounds. The method is appropriate for use with organic and inorganic colour pigments and for pigment preparations.

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinylchloride by two-roll milling; German version EN 13900-2:2003

DIN EN 13900-3:2003 颜料和填充剂.扩散方法和在塑料中可扩散性的评估.第3部分:用两辊研磨测定色彩特点和黑色及彩色颜料在聚乙烯中的易扩散性

This part of EN 13900 specifies a method of determining in polyethylene (PE) the colouristic properties of a test pigment relative to a standard, and the ease of dispersion DH/PE of pigments from the differences in colour strength on dispersing colouring materials under various conditions. The method is appropriate for use with organic and inorganic black and colour pigments.#,,#

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling; German version EN 13900-

DS/EN 13900-2:2003 颜料和增量剂 塑料中的分散方法和分散特性的评估 第2部分：通过双辊研磨法测定增塑聚氯乙烯中的色彩特性和分散难易程度

This part of this European standard specifies a method of determining the coloristic properties of a test pigment relative to a standard, and the ease of dispersion DHpvc-p of pigments from the differences in colour strength on dispersing colouring materials under various conditions in plasticized polyvinyl chloride compounds.

Pigments and extenders - Methods of dispersion and assessment of dispersibility characteristics in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling