83.040.30 塑料的辅料和添加剂 标准查询与下载

BS EN ISO 1043-2:2001 填充剂及加强材料

This part of ISO 1043 provides uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

Fillers and reinforcing materials

ISO 1043-2:2000 塑料 符号和缩略语 第2部分:填充剂及加强材料

This part of ISO 1043 provides uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials

ISO 14897:2000 塑料.用于聚氨酯生产的多元醇.水含量的测定

Plastics - Polyols for use in the production of polyurethane - Determination of water content

DS/EN 12877-4:2000 塑料着色材料 塑料着色材料加工过程中颜色对热稳定性的测定 第4部分：双辊研磨法测定

This Part of EN 12877 describes a method for determining the colour stability of colouring materials in plastics by two-roll milling. The result of the determination is a relative value, not an absolute one. The method is mainly used for testing colouring materials in polyvinyl chloride.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling

DS/EN 12877-2:2000 塑料着色材料 塑料着色材料加工过程中颜色对热稳定性的测定 第2部分：注射成型测定

This Part of EN 12877 describes a method for determining the colour stability of colouring materials under defined conditions in plastics by injection moulding. The result of the determination is a relative value, not an absolute one. The method is applicable for testing colouring materials in thermoplastics that are processible by injection moulding.

Colouring materials in plastics - Determination of colour staility to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding

DS/EN 12877-1:2000 塑料着色材料 塑料着色材料加工过程中颜色对热稳定性的测定 第1部分：概述

This part of EN 12877 gives a general introduction to the most widely used methods for determination of colour stability during processing of colouring materials in plastics under the influence of heat. It also specifies those details which are common to the various test methods described in subsequent parts of EN 12877.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction

DS/EN 12877-3:2000 塑料着色材料 塑料着色材料加工过程中颜色对热稳定性的测定 第3部分：烘箱试验测定

This Part of EN 12877 describes a method for determining the colour stability of colouring materials in plastics under defined conditions by an oven test. The result of the determination is a relative value, not an absolute one. The method is mainly used for testing colouring materials in polyvinyl chloride, and in thermosetting materials.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test

BS EN 12877-4:2000 塑料中的染色材料.塑料中染色材料在处理过程中颜色的热稳定性测定.双辊磨测定法

This part of EN 12877 describes a method for determining the colour stability of colouring materials under defined conditions in plastics by two-roll milling. The result of the determination is a relative value, not an absolute one. The method is mainly used for testing colouring materials in polyvinyl chloride.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by two-roll milling

BS EN 12877-1:2000 塑料中的染色材料.塑料中染色材料在处理过程中颜色的热稳定性测定.一般说明

This part of EN 12877 gives a general introduction to the most widely used methods for determination of colour stability during processing of colouring materials in plastics under the influence of heat. It also specifies those details which are common to the various test methods described in subsequent parts of EN 12877. The choice of the test method depends on the plastics material to be coloured, the method of processing and the end-use requirements.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - General introduction

BS EN 12877-2:2000 塑料中的染色材料.塑料中染色材料在处理过程中颜色的热稳定性测定.喷射模塑测定法

This part of EN 12877 describes a method for determining the colour stability of colouring materials under defined conditions in plastics by injection moulding. The result of the determination is a relative value, not an absolute one. The method is applicable for testing colouring materials in thermoplastics that are processible by injection moulding.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by injection moulding

BS EN 12877-3:2000 塑料中的染色材料.塑料中染色材料在处理过程中颜色的热稳定性测定.耐热试验测定法

This part of EN 12877 describes a method for determining the colour stability of colouring materials in plastics under defined conditions by an oven test. The result of the determination is a relative value, not an absolute one. The method is mainly used for testing colouring materials in polyvinyl chloride, and in thermosetting materials.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by oven test

DIN EN ISO 1043-4:2000 塑料.符号和缩略语.第4部分:阻燃剂

The document provides uniform symbols for flame retardants added to plastics materials. The symbols are written with the abbreviated term 'FR' and one or more succeeding code numbers. They are used in addition to the symbols for plastics materials, for plastics material designation and for identification and marking of plastics products.#,,#

Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998); German version EN ISO 1043-4:1999

DIN EN 12877-1:2000 塑料中的着色剂.塑料中着色剂的处理过程中颜色热稳定性的测定.第1部分:概述

The document gives a general introduction to the most widely used methods for determination of colour stability during processing of colouring materials in plastics under the influence of heat. It also specifies those details which are common to the various test methods described in the subsequent parts. The choice of the test method depends on the plastics material to be coloured, the method of processing and the end-use requirements.#,,#

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction; German version EN 12877-1:1999

DIN EN 12877-3:2000 塑料中的着色剂.塑料中着色剂的处理过程中颜色热稳定性的测定.第3部分:烘箱试验法测定

The document describes a method for determinating the colour stability of colouring materials under defined conditions in plastics by an oven test. The result of the determination is a relative value, not an absolute one. The method is mainly used for testing colouring materials in polyvinyl chloride, and in thermosetting materials.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test; German version EN 12877-3:1999

DIN EN 12877-4:2000 塑料中的着色剂.塑料中着色剂的处理过程中颜色热稳定性的测定.第4部分:双辊研磨法测定

The document describes a method for determinating the colour stability of colouring materials under defined conditions in plastics by two-roll milling. The result of the determination is a relative value, not an absolute one. The method is mainly applicable for testing colouring materials in polyvinyl chloride.#,,#

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling; German version EN 12877-4:1999

DIN EN ISO 1043-3:2000 塑料.符号和缩略语.第3部分:增塑剂

The document provides uniform symbols for components of terms relating to plasticizers to form abbreviated terms. It includes, in general, only those abbreviated terms that have come into established use.

Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996); German version EN ISO 1043-3:1999

DIN EN 12877-2:2000 塑料中的着色剂.塑料中着色剂的处理过程中颜色热稳定性的测定.第2部分:用注塑模塑法测定

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding; German version EN 12877-2:1999

ANSI/ASTM D3465:2000 用气相色谱法测定单体增塑剂惯例

This gas chromatographic test method covers a procedure for extending the range of purity determination of monomeric plasticizers beyond that now determined by other methods. Due to the need to volatilize the plasticizer, only monomeric plasticizers having definitive boiling points and a molecular weight less than 1000 Daltons, such as dioctyl phthalate, are applicable to this test method. The values in SI units are to be regarded as standard. The text of this test method references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) are not to be considered as requirements of this test method. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 9. Note 1There is no known ISO equivalent for this test method.

Practice for Purity of Monomeric Plasticizers by Gas Chromatography

NF T31-301*NF EN 12877-1:1999 塑料中的着色剂.塑料中着色剂处理时颜色热稳定性的测定.第1部分:一般说明

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1 : general introduction.

DIN 55625-24:1999 塑料用填料.第23部分:氢氧化镁.规范和试验方法

The document specifies requirements and corresponding methods of test for magnesium hydroxide for the use as extender in plastics. It can be used accordingly for other fields of application.

Extenders for plastics - Part 24: Magnesium hydroxide; specifications and methods of test