83.040.30 塑料的辅料和添加剂 标准查询与下载

DIN 55625-23:1999 塑料用填料.第23部分:金云母.规范和试验方法

The document specifies requirements and corresponding methods of test for phlogopite for the use as extender in plastics. It can be used accordingly for other fields of application.

Extenders for plastics - Part 23: Phlogopite; specifications and methods of test

NF T50-050-3:1999 塑料制品.符号和缩略术语.第3部分:增塑剂

Plastics. Symbols and abbreviated terms. Part 3 : plasticizers.

NF T50-050-4:1999 塑料制品.符号和缩略语.第4部分:阻燃剂

Plastics. Symbols and abbreviated terms. Part 4 : flame retardants.

BS ISO 15038:1999 塑料.不饱和聚酯热固化材料的有机聚酯交联剂.活性氧含量的测定

This International Standard specifies a method of determining the total active-oxygen content of organic peresters. It applies to those peresters used to initiate crosslinking of unsaturated-polyester thermosets. The peresters most widely used in the crosslinking of unsaturated-polyester resins are given in Table 1. Butyl peresters may contain traces of tert-butyl hydroperoxide (TBHP), the active oxygen in which can be determined separately from that in the perester itself (see annex A). The active-oxygen content of the perester alone can then be obtained by subtraction.

Plastics - Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials - Determination of active-oxygen content

BS EN ISO 1043-3:1999 塑料.符号和缩略语.增塑剂

1 This part of ISO 1043 provides uniform symbols for components of terms relating to plasticizers to form abbreviated terms. It includes, in general, only those abbreviated terms that have come into established use. 2 The purpose of this part of ISO 1043 is to prevent the occurrence of more than one abbreviated term for a given plasticizer. The symbols are primarily intended to be a convenient shorthand for forming abbreviated terms for chemical names in publications and other written matter.

Plastics - Symbols and abbreviated terms - Plasticizers

BS EN ISO 1043-4:1999 塑料.符号和缩略语.阻燃剂

This part of ISO 1043 provides uniform symbols for flame retardants added to plastics materials. The symbols are written with the abbreviated term "FR" and one or more succeeding code numbers as given in clause 5. They are used in addition to the symbols for the plastics materials, for plastics material designation and for identification and marking of plastics products.

Plastics - Symbols and abbreviated terms - Flame retardants

ISO 15038:1999 塑料 不饱和聚酯热固性材料的有机聚酯交联剂 活性氧含量的测定

This International Standard specifies a method of determining the total active-oxygen content of organic peresters. It applies to those peresters used to initiate crosslinking of unsaturated-polyester thermosets. The peresters most widely used in the crosslinking of unsaturated-polyester resins are given in Table 1. Butyl peresters may contain traces of terf-butyl hydroperoxide (TBHP), the active oxygen in which can be determined separately from that in the perester itself (see annex A). The active-oxygen content of the perester alone can then be obtained by subtraction.

Plastics - Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials - Determination of active-oxygen content

EN ISO 1043-3:1999 塑料.符号和缩略语.第3部分:增塑剂ISO 1043-3-1996

Plastics - Symbols and Abbreviated Terms - Part 3: Plasticizers ISO 1043-3:1996

EN ISO 1043-4:1999 塑料.符号和缩略语.第4部分:阻燃剂 ISO 1043-4-1998

Plastics - Symbols and Abbreviated Terms - Part 4: Flame Retardants ISO 1043-4:1998

DIN 55625-6:1999 塑料的填料.第6部分:沉降碳化钙.要求和试验方法

Extenders for plastics - Part 6: Precipitated calcium carbonate (PCC), specifications and methods of test

DIN 55625-4:1999 塑料的填料.第4部分:白垩粉.规范和试验方法

This document specifies requirements and corresponding methods of test for whiting for the use as extender in plastics. For the use of whiting as extender for coating materials see DIN EN ISO 3262-4.

Extenders for plastics - Part 4: Whiting, specifications and methods of test

DIN 55625-5:1999 塑料的填料.第4部分:天然结晶的碳化钙.规范和试验方法

This document specifies requirements and corresponding methods of test for natural crystalline calcium carbonate (NCC) for the use as extender in plastics. For the use of NCC as extender for coating materials see DIN EN ISO 3262-5.

Extenders for plastics - Part 5: Natural crystalline calcium carbonate (NCC), specifications and methods of test

DIN 55625-7:1999 塑料的填料.第7部分:白云石.要求和试验方法

This document specifies requirements and corresponding methods of test for dolomite for the use as extender in plastics. For the use of dolomite as extender for coating materials see DIN EN ISO 3262-7.

Extenders for plastics - Part 7: Dolomite, specifications and methods of test

EN 12877-1:1999 塑料中的着色剂.塑料中着色剂处理过程中耐热颜色稳定性的测定.第1部分:概述

This part of EN 12877 gives a general introduction toThe most widely used methods for determination of colour stabilly during processing of colouring materials in plastics underThe influence of heat.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction

EN 12877-4:1999 塑料中的着色剂.塑料中着色剂处理过程中耐热颜色稳定性的测定.第4部分:双辊研磨法测定

This part of EN 12877 describes a method for determiningThe colour stability of colouring materials under defined conditions in plastics by two-roll milling.The result of the determinattion is a relatibe value,not an absolute one.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling

EN 12877-3:1999 塑料中的着色剂.塑料中着色剂处理过程中耐热颜色稳定性的测定.第3部分:加热试验法测定

This part of EN 12877 describes a method for determiningThe colour stability of colouring materials in plastics under defined conditions by an oven test.The result of the determination is a relative value, not an absolute one.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test

EN 12877-2:1999 塑料中的着色剂.塑料中着色剂处理过程中耐热颜色稳定性的测定.第2部分:注模法测定

This part of EN 12877 describes a method for determiningThe colour stability of colouring materials under defined conditions in plastics by injection moulding.The result of the determination is a relative value,not an absolute one.

Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding

DIN EN ISO 9702:1998 塑料.胺类环氧固化剂.伯仲叔胺基含氮量的测定

The document specifies a method for the determination of the primary, secondary and tertiary amine group nitrogen content of aliphatic or aromatic amine hardeners for epoxy resins.#,,#

Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996); German version EN ISO 9702:1998

NF T51-177:1998 塑料制品.环氧树脂的硬化剂和加速剂.第1部分:标识

Plastics - Hardeners and accelerators for epoxide resins - Part 1 : designation.

EN ISO 9702:1998 塑料.胺类环氧固化剂.伯仲叔胺基含氮量的测定

This International Standard specifies a method for the determination of the primary, secondary and tertiary amine group nitrogen content of aliphatic or aromatic amine hardeners for epoxy resins.

Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996)