83.060 (Rubber) 标准查询与下载

ASTM D1917-97 橡胶性能的试验方法.热聚丁苯橡胶(SBR)生胶和混炼胶的收缩性的标准试验方法

1.1 These test methods cover the determination of mill shrinkage of hot-polymerized styrene-butadiene rubbers (SBR) and their compounds. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Rubber Property-Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)

ASTM D3186-97(2002) 橡胶的试验方法.与炭黑或炭黑和油混合的丁苯橡胶(SBR)的评定

1.1 These test methods specify the standard materials, test formula, mixing procedures, and test methods for the evaluation and production control of pigmented types of styrene-butadiene rubbers (SBR). This includes the pigmented SBR oil masterbatches.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil

ASTM D3566-96(2001) 橡胶的标准规程.用氧燃烧法测定在氯存在时橡胶中的溴含量

1.1 This practice covers the determination of bromine and chlorine in rubber. 1.2 This procedure is applicable to raw or cured NR, SBR, BR, IR, IIR, CIIR, BIIR, and EPDM rubbers and blends of these. 1.3 Iodine interferes, but substances such as Zn 2+, S, CN-, and (CO3) 2- do not. 1.4 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety precautions are given in Section 7.

Standard Practice for Rubber8212;Determination of Bromine in the Presence of Chlorine by Oxygen Combustion

ASTM D5992-96(2001)e1 使用震荡方法进行硫化橡胶和橡胶类似材料动态试验的标准指南

1.1 This guide covers dynamic testing of vulcanized rubber and rubber-like (both hereinafter termed "rubber" or "elastomeric") materials and products, leading from the definitions of terms used, through the basic mathematics and symbols, to the measurement of stiffness and damping, and finally through the use of specimen geometry and flexing method, to the measurement of dynamic modulus.1.2 This guide describes a variety of vibratory methods for determining dynamic properties, presenting them as options, not as requirements. The methods involve free resonant vibration, and forced resonant and nonresonant vibration. In the latter two cases the input is assumed to be sinusoidal.1.3 While the methods are primarily for the measurement of modulus, a material property, they may in many cases be applied to measurements of the properties of full-scale products.1.4 The methods described are primarily useful over the range of temperatures from -70oC to +200oC (-100oF to +400oF) and for frequencies from 0.01 to 100 Hz. Not all instruments and methods will accommodate the entire ranges.1.5 When employed for the measurement of dynamic modulus, the methods are intended for materials having complex moduli in the range from 100 to 100 000 kPa (15 to 15 000 psi) and damping angles from 0 to 90 degrees. Not all instruments and methods will accommodate the entire ranges.1.6 Both translational and rotational methods are described. To simplify generic descriptions, the terminology of translation is used. The subject matter applies equally to the rotational mode, substituting "torque" and "angular deflection" for "force" and "displacement."1.7 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.8 This guide is divided into sections, some of which include: SectionTerminology and Symbols3Factors Influencing Dynamic Measurement7Test Methods and Specimens8Nonresonant Analysis Methods and Their Influence on Results9Report 10Mechanical and Instrumentation Factors Influencing Dynamic MeasurementAnnex A1Guide to Further ReadingAppendix X1Double-Shear Specimens-Derivation of Equations and Descriptions of SpecimensAppendix X2Torsion Specimens-Derivation of Equations and Descriptions of SpecimensAppendix X3Compression/Tension Specimens-Derivation of Equations and Descriptions of SpecimensAppendix X4Free Resonant Vibration-Equations for Log Decrement and StiffnessAppendix X5Obtaining Loss Factor and Elastic Stiffness from Transmissibility CurvesAppendix X6 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

ASTM D2230-96(2002) 橡胶性质的标准试验方法.未硫化化合物的可挤压性

1.1 This test method covers the determination of the extrudability of unvulcanized SBR and NBR rubber compounds through a screw-type extruder equipped with ASTM Extrusion Die, Garvey type. This test method is designed to allow the observation of the appearance and contours of the extrusion. Rating systems are provided along with recipes for compounds of known extrusion characteristics. The utility of the test method for evaluating rubbers or compounding materials other than those listed has not been established. Since extrusion machines differ among laboratories, the procedure includes techniques that minimize differences between machines.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds

ASTM D5992-96(2006)e1 使用震荡方法进行硫化橡胶和橡胶类似材料动态试验的标准指南

This guide is intended to describe various methods for determining the dynamic properties of vulcanized rubber materials, and by extension, products utilizing such materials in applications such as springs, dampers, and flexible load-carrying devices, flexible power transmission couplings, vibration isolation components and mechanical rubber goods in general. As a guide, it is intended to provide descriptions of options available rather than to specify the use of any one in particular.1.1 This guide covers dynamic testing of vulcanized rubber and rubber-like (both hereinafter termed "rubber" or "elastomeric") materials and products, leading from the definitions of terms used, through the basic mathematics and symbols, to the measurement of stiffness and damping, and finally through the use of specimen geometry and flexing method, to the measurement of dynamic modulus.1.2 This guide describes a variety of vibratory methods for determining dynamic properties, presenting them as options, not as requirements. The methods involve free resonant vibration, and forced resonant and nonresonant vibration. In the latter two cases the input is assumed to be sinusoidal.1.3 While the methods are primarily for the measurement of modulus, a material property, they may in many cases be applied to measurements of the properties of full-scale products.1.4 The methods described are primarily useful over the range of temperatures from -70176;C to +200176;C (100176;F to +400F) and for frequencies from 0.01 to 100 Hz. Not all instruments and methods will accommodate the entire ranges.1.5 When employed for the measurement of dynamic modulus, the methods are intended for materials having complex moduli in the range from 100 to 100 000 kPa (15 to 15 000 psi) and damping angles from 0 to 90. Not all instruments and methods will accommodate the entire ranges.1.6 Both translational and rotational methods are described. To simplify generic descriptions, the terminology of translation is used. The subject matter applies equally to the rotational mode, substituting "torque" and "angular deflection" for "force" and "displacement."1.7 This guide is divided into sections, some of which include:1.8 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

ASTM D2230-96(2012) 橡胶性质的标准试验方法.未硫化化合物的可挤压性

One objective in the extrusion of rubber compounds is to obtain a smooth extrusion that closely reproduces the contours of the extrusion die. This test method provides for a subjective determination of this under controlled conditions. As the rating is subjective, it does not lend itself readily to incorporation as a specification requirement. It does not measure other aspects of extrudability such as rate of extrusion or die swell in a quantitative manner.1.1 This test method covers the determination of the extrudability of unvulcanized SBR and NBR rubber compounds through a screw-type extruder equipped with ASTM Extrusion Die, Garvey type. This test method is designed to allow the observation of the appearance and contours of the extrusion. Rating systems are provided along with recipes for compounds of known extrusion characteristics. The utility of the test method for evaluating rubbers or compounding materials other than those listed has not been established. Since extrusion machines differ among laboratories, the procedure includes techniques that minimize differences between machines. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Propertymdash;Extrudability of Unvulcanized Compounds

ASTM D5992-96(2011) 用振动法对硫化橡胶和与橡胶性质相近材料进行动态试验的标准指南

This guide is intended to describe various methods for determining the dynamic properties of vulcanized rubber materials, and by extension, products utilizing such materials in applications such as springs, dampers, and flexible load-carrying devices, flexible power transmission couplings, vibration isolation components and mechanical rubber goods in general. As a guide, it is intended to provide descriptions of options available rather than to specify the use of any one in particular.1.1 This guide covers dynamic testing of vulcanized rubber and rubber-like (both hereinafter termed "rubber" or "elastomeric") materials and products, leading from the definitions of terms used, through the basic mathematics and symbols, to the measurement of stiffness and damping, and finally through the use of specimen geometry and flexing method, to the measurement of dynamic modulus.1.2 This guide describes a variety of vibratory methods for determining dynamic properties, presenting them as options, not as requirements. The methods involve free resonant vibration, and forced resonant and nonresonant vibration. In the latter two cases the input is assumed to be sinusoidal.1.3 While the methods are primarily for the measurement of modulus, a material property, they may in many cases be applied to measurements of the properties of full-scale products.1.4 The methods described are primarily useful over the range of temperatures from -70176;C to +200176;C (100176;F to +400F) and for frequencies from 0.01 to 100 Hz. Not all instruments and methods will accommodate the entire ranges.1.5 When employed for the measurement of dynamic modulus, the methods are intended for materials having complex moduli in the range from 100 to 100 000 kPa (15 to 15 000 psi) and damping angles from 0 to 90. Not all instruments and methods will accommodate the entire ranges.1.6 Both translational and rotational methods are described. To simplify generic descriptions, the terminology of translation is used. The subject matter applies equally to the rotational mode, substituting "torque" and "angular deflection" for "force" and "displacement."1.7 This guide is divided into sections, some of which include:1.8 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

ASTM D2230-96(2007) 橡胶特性标准试验方法.未硫化橡胶化合物的可挤压性

One objective in the extrusion of rubber compounds is to obtain a smooth extrusion that closely reproduces the contours of the extrusion die. This test method provides for a subjective determination of this under controlled conditions. As the rating is subjective, it does not lend itself readily to incorporation as a specification requirement. It does not measure other aspects of extrudability such as rate of extrusion or die swell in a quantitative manner.1.1 This test method covers the determination of the extrudability of unvulcanized SBR and NBR rubber compounds through a screw-type extruder equipped with ASTM Extrusion Die, Garvey type. This test method is designed to allow the observation of the appearance and contours of the extrusion. Rating systems are provided along with recipes for compounds of known extrusion characteristics. The utility of the test method for evaluating rubbers or compounding materials other than those listed has not been established. Since extrusion machines differ among laboratories, the procedure includes techniques that minimize differences between machines.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds

ASTM D2632-96 橡胶特性的标准试验方法.垂直回跳法测定橡胶弹性

1.1 This test method covers the determination of impact resilience of solid rubber from measurement of the vertical rebound of a dropped mass.1.2 This test method is not applicable to the testing of cellular rubbers or coated fabrics. 1.3 A standard test method for impact resilience and penetration of rubber by a rebound pendulum is described in Test Method D 1054.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Property8212;Resilience by Vertical Rebound

ASTM D5992-96(2006) 用振动法对硫化橡胶和类橡胶材料进行动态试验的标准指南

1.1 This guide covers dynamic testing of vulcanized rubber and rubber-like (both hereinafter termed "rubber" or "elastomeric") materials and products, leading from the definitions of terms used, through the basic mathematics and symbols, to the measurement of stiffness and damping, and finally through the use of specimen geometry and flexing method, to the measurement of dynamic modulus.1.2 This guide describes a variety of vibratory methods for determining dynamic properties, presenting them as options, not as requirements. The methods involve free resonant vibration, and forced resonant and nonresonant vibration. In the latter two cases the input is assumed to be sinusoidal.1.3 While the methods are primarily for the measurement of modulus, a material property, they may in many cases be applied to measurements of the properties of full-scale products.1.4 The methods described are primarily useful over the range of temperatures from -70176;C to +200176;C (100176;F to +400176;F) and for frequencies from 0.01 to 100 Hz. Not all instruments and methods will accommodate the entire ranges.1.5 When employed for the measurement of dynamic modulus, the methods are intended for materials having complex moduli in the range from 100 to 100 000 kPa (15 to 15 000 psi) and damping angles from 0 to 90. Not all instruments and methods will accommodate the entire ranges.1.6 Both translational and rotational methods are described. To simplify generic descriptions, the terminology of translation is used. The subject matter applies equally to the rotational mode, substituting "torque" and "angular deflection" for "force" and "displacement."1.7 This guide is divided into sections, some of which include:1.8 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

ASTM D1025-96 聚合级丁二烯中不挥发性残余物的标准试验方法

1.1 This test method covers the determination of nonvolatile material in polymerization-grade butadiene. 1.2 The values stated in SI units are to be regarded as standard. The values stated in inch-pound units are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene

ASTM D5667-95(2005) 合成原料橡胶总水溶性灰分的标准试验方法

These tests are mainly intended for referee purposes but can also be used for quality control of rubber production. The total and water soluble ash content of a rubber can affect the properties of compounded, vulcanized rubber such as water absorption, swell, electrical properties, etc.1.1 This test method covers a test method for the determination of ash content in synthetic rubber.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash

ASTM D5667-95(2000) 合成橡胶的标准试验方法&x2014；总灰分和水溶性灰分

1.1 This standard covers a test method for the determination of ash content in synthetic rubber. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash

ASTM D5775-95(2000) 橡胶的标准试验方法&x2014；折射率法测定丁苯橡胶中结合苯乙烯

1.1 This test method for determination of styrene content is intended for general use on solid uncompounded styrene-butadiene copolymers, commonly referred to as SBR, prepared by the emulsion process. SBR polymers prepared in solution will require the use of different refractive index tables because the vinyl content of the butadiene differs from that in the emulsion polymers. It is applicable to polymers having less than 55% bound styrene. Note 1--The nomenclature used in this test method is in accordance with Practice D1418. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber from Synthetic Sources-Bound Styrene in SBR

ASTM D813-95(2000) 半刚性闭孔聚丙烯泡沫标准规范 混凝土铺路和结构施工预制膨胀接头填料

1.1 This test method covers the determination of crack growth of vulcanized rubber when subjected to repeated bending strain or flexing. It is particularly applicable to tests of synthetic rubber compounds which resist the initiation of cracking due to flexing when tested by Method B of Test Methods D430. Cracking initiated in these materials by small cuts or tears in service, may rapidly increase in size and progress to complete failure even though the material is extremely resistant to the original flexing-fatigue cracking. Because of this characteristic of synthetic compounds, particularly those of the SBR type, this test method in which the specimens are first artificially punctured in the flex area should be used in evaluating the fatigue-cracking properties of this class of material. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Deterioration-Crack Growth

ASTM D2084-95 橡胶性能的标准试验方法.用振动圆盘硫化计测量硫化作用

1.1 This test method describes the use of the oscillating disk cure meter for determining selected vulcanization characteristics of vulcanizable rubber compounds. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 ISO 3417 is very similar to this test method. It has minor technical differences that are not considered to be significant. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter

ASTM D5774-95(2000) 橡胶的标准试验方法&x2014；萃取物的化学分析

1.1 These test methods for chemical analysis of extractables from synthetic rubbers are intended for general use on solid uncompounded styrene-butadiene copolymers commonly referred to as SBR. Analysis of other synthetic rubbers is also possible with some of these test methods. The test methods and the sections in which they are covered are as follows:Total Extractables4-11Organic Acid12-19Soap20-26Oil27-42Note 1--The nomenclature used in these test methods is in accordance with Practice D1418.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables

ASTM D5289-95(2001) 橡胶性能的标准试验方法&8212；使用无转子硫化仪进行硫化

1.1 This test method specifies a method for the measurement of selected vulcanization characteristics of rubber compounds using rotorless linear shear, unsealed torsion shear, and sealed torsion shear cure meters. The three types of instruments may not give the same results. Note 18212;An alternative method for the measurement of vulcanization characteristics is given in Test Method D 2084.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters

ASTM D814-95(2000) 离子色谱测定石油产品和润滑油中杂原子和阴离子的优化 校准和验证的标准实践

1.1 This test method covers the measurement of the rate of vapor transmission of volatile liquids through a rubber sheet, disk, or diaphragm. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids