共找到 270 条与 塑料 相关的标准,共 18 页
本文件规定了导排水垫的分类与型号要求.试验方法、检验规则,以及标志、包装、运输和贮存。 本文件适用于垃圾填埋场.固体废弃物填埋场.路桥工程.环境修复工程及海绵城市等环保及市政工程。
Drainage mats
本标准规定了聚乙烽(PE)塑料再生料的重要表征特性、检测方法及质量保证。 本标准适用于聚乙烽(PE)塑料再生料的质量控制和评价。
Characterization and testing methods of recycled polyethylene (PE)
Limits for lead, cadmium, hexavalent chromium, mercury in plastic materials
Determination of polybrominated biphenyls and polybrominated biphenyl ethers in plastic products—High performance liquid chromatography
Determination of polybrominated biphenyls and polybrominated diphenyl ethers in plastic products—Gas chromatography and mass spectrometry
Characterisation and testing methods of recycled poly(vinyl chloride)(PVC)
Characterisation and testing methods of recycled poly (ethylene terephthalate)(PET)
Characterisation and testing methods of recycled polypropylene (PP)
General requirement of thermoplastic starch
本标准规定了凝结水精处理用离子交换树脂的产品分类、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于凝结水精处理用钠型阳离子交换树脂和氯型阴离子交换树脂。
Ion exchange resins for condensate polishing treatment
本标准规定了D113大孔弱酸性丙烯酸系阳离子交换树脂的产品分类、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于D113大孔弱酸性丙烯酸系阳离子交换树脂。
D113 macroporous weak acid acrylic type cation exchange resins
GB/T 24148的本部分规定了在室温条件下测定不饱和聚酯树脂凝胶时间的方法,测定的温度范围是18 ℃~30 ℃。推荐温度为25 ℃。本部分适用于液态不饱和聚酯树脂。
Plastics.Unsaturated polyester resins.Part 7: Measurement of gel time at ambient temperature
本标准规定了钮扣用液体不饱和聚酯树脂的产品的命名、技术要求、试验方法、检验规则及包装、标志、运输和储存。本标准适用于苯乙烯为主要交联剂用液体不饱和聚酯树脂。
Liquid unsaturated polyester resin for button
GB/T 24148的本部分规定了不饱和聚酯树脂总体积收缩率的测定方法。本部分适用于液态不饱和聚酯树脂。
Plastics.Unsaturated polyester resins (UP-R).Part 9:Determination of overall volume shrinkage
本标准规定了塑木复合材料产品的弯曲、压缩、剪切强度、蠕变性能试验、握钉力、落锤冲击、密度、含水率、防滑性、耐磨性、线性热膨胀系数、吸水性、吸水厚度膨胀、耐冻融性、试验方法。本标准适用于塑木复合材料产品,包括横截面为实心或空心、新料或回收料制成、结构用或非结构用产品的试验方法。
Test methods for mechanical and physical properties of wood-plastic composite product
GB/T 12008的本部分规定了聚醚多元醇黏度的测定方法。 方法A为Brookfield黏度方法。本测试方法适用于在25℃或50℃时测定黏度范围为(10~10)mPa•s的聚醚多元醇的黏度。同时还能适用于能溶解于乙酸正丁酯的更加黏稠样品的黏度测定。 方法B为旋转式黏度方法。本测试方法适用于在25℃时测定黏度范围为(10~10)mPa•s的聚醚多元醇的黏度。
Plastics.Polyether polyols.Part 7:Determination of viscosity
GB/T 12010的本部分规定了聚乙烯醇材料粒度的测定方法。 本部分适用于测定醇解度大于70%(摩尔分数)的聚乙烯醇材料的粒度和粒度分布。
Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 6:Determination for particle size
GB/T 12010的本部分规定了用滴定法测定聚乙烯醇材料中氢氧化钠含量的方法。 本部分适用于测定醇解度大于70%(摩尔分数)的聚乙烯醇材料中氢氧化钠的含量。
Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 7:Determination for sodium hydroxide contents
GB/T 12010的本部分规定了用奥氏黏度计测定聚乙烯醇材料水溶液特性黏度并由特性黏度计算聚乙烯醇材料平均聚合度的方法。 本部分适用于测定醇解度大于70%(摩尔分数)的聚乙烯醇材料的平均聚合度。
Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 5:Determination for average polymerization degree
GB/T 12010的本部分规定了用分光光度计测定非纤维用聚乙烯醇材料水溶液透明度的方法。 本部分适用于测定醇解度大于70%(摩尔分数)的聚乙烯醇材料4%水溶液的透明度。
Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 8:Determination for transparency
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号