83.080.20 热塑性塑料 标准查询与下载

ASTM D6042-23 用液相色谱法（LC）测定聚丙烯均聚物配方中酚类抗氧化剂和芥子酰胺滑动添加剂的标准试验方法

Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

ASTM D6040-18(2023) 无夹层聚四氟乙烯（PTFE）挤压薄膜或带标准试验方法的标准指南

Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

T/SHPTA 057-2023 塑料 动力电池外壳用聚丙烯（PP）改性专用料

本文件规定了动力电池外壳用聚丙烯（PP）改性专用料（以下简称“产品”）的分类与命名、要求、试验方法、检验规则、标志和随行文件、包装、运输及贮存

Plastics-Modified polypropylene (PP) compound for power battery casing

T/QGCML 1649-2023 液体C5增粘石油树脂

本文件规定了液体C5增粘石油树脂的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于液体C5增粘石油树脂的生产和检验，以下简称“树脂”。

Liquid C5 tackified petroleum resin

ASTM D4440-23 塑料的标准试验方法:动态机械性能熔体流变学

Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

T/CI 148-2023 光学级航空聚碳酸酯材料技术规范

本文件规定了光学级航空聚碳酸酯材料的产品分类、技术要求、质量要求、包装、运输和贮存等内容。 本文件适用于注射成型航空座舱透明件或挤出成型航空级聚碳酸酯板材的聚碳酸酯粒料的制造与检验，也适用于具有同样要求的聚碳酸酯粒料。

Materials specification for optical aviation polycarbonate

T/CIEP 0038-2023 副产对氯苯甲酸

本文件规定了副产对氯苯甲酸的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。

By-product p-chlorobenzoic acid

T/SGX 018-2023 再生塑料 木塑复合材料用电缆热塑性交联聚乙烯专用料

熔体质量流动速率 g/10min ≥0.8，≤3  灰分（600oC±25 oC） % ＜2  拉伸性能  拉伸强度 MPa ≥15  断裂伸长率 % ≥300  弯曲性能  弯曲强度 MPa ≥10  弯曲模量 MPa ≥400  悬臂梁缺口冲击强度 kJ/m2 ≥15

Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites

T/GDPIA 66-2023 再生塑料 木塑复合材料用电缆热塑性交联聚乙烯专用料

1.范围 本文件规定了木塑复合材料用电缆热塑性交联聚乙烯专用料（以下简称“产品”）的术语与定义、性能要求、试验方法、检验规则、标志、包装、运输及贮存等要求。 本文件适用于专用于生产木塑复合材料的电缆回收热塑性交联聚乙烯材料。 2.规范性引用文件 3.术语和定义 4.性能要求 5.试验方法 6.检验规则 7.标志 8.包装、运输及贮存

Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites

ASTM D8436-23 用于井下电缆封装的含氟聚合物材料的标准规范

1.1  This specification covers thermoplastic fluoropolymer-based materials, intended for use as an encapsulation material for downhole cables used during well completion by the petroleum and natural gas industries. 1.1.1  The fluoropolymer-based materials to be used for this purpose shall be virgin materials and shall be permitted to contain up to 25 %, by weight, of reprocessed material (regrind) of the same fluoropolymer generic material type. When reprocessed material is included, it shall be thoroughly mixed with virgin material. 1.2  The fluoropolymers covered by this specification include but are not limited to the following: ethylene tetrafluoroethylene (ETFE), polyethylene chlorotetrafluoroethylene (ECTFE), fluorinated ethylene propylene (FEP), polyvinylidene fluoride (PVDF), copolymers of PVDF, polychlorotrifluoroethylene (PCTFE), polytetrafluoroethylene (PTFE), and perfluoroalkoxy alkane (PFA). 1.3  This specification establishes common temperature ratings for the encapsulation materials and also describes requirements for alternative temperature ratings. 1.4  The applications for the encapsulation materials covered by this specification are all associated with downhole cables used during well completion. Such applications include, but are not limited to, the following: control lines (CL), tubing encased conductors (TEC), tubing encased fiber cables (TEF), and tubing encased power cables (TEPC). Other downhole cable products such as surface-controlled sub-surface safety valves (SCSSV or SSSV) and chemical injection lines/chemical injection tubes (CIL/CIT) are also covered by this specification. 1.5  The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.6  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Fluoropolymer-based Materials for Use for Encapsulation of Downhole Cable

T/QGCML 1337-2023 超高分子量聚乙烯防静电烧结板滤芯

本文件规定了超高分子量聚乙烯防静电烧结板滤芯（以下简称“滤芯”）的分类及型号命名、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于工业除尘用超高分子量聚乙烯防静电烧结板滤芯的制造、检验。

Ultra-high molecular weight polyethylene anti-static sintered plate filter element

ASTM D2464-23 螺纹聚氯乙烯（PVC）塑料管件标准规范 表80

Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

ISO/FDIS 182-3:2023 塑料 - 基于氯乙烯均聚物和共聚物的化合物和产品在高温下释放氯化氢和任何其他酸性产物的倾向的测定 - 第3部分：电导法

Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 3: Conductometric method

T/SGX 016-2023 注塑用聚乳酸/滑石粉专用料

1　含水量　%　≤0.25 2　灰分　%　＜49 3　密度　g/cm3　≤ 1.80 4　熔体质量流动速率　X ＜10　g/10min　X ±2 　　10≤X＜20　　X ±3 　　X   ≥ 20　　X ±4 5　拉伸强度　MPa　≥40 6　弯曲强度　MPa　≥60 7　冲击强度　KJ/m2　≥3.5

Compounding of polylactic acid and talc powder for injection molding

T/SGX 017-2023 注塑用聚乳酸/碳酸钙专用料

1　含水量　%　≤0.25 2　灰分　%　X±2，且最高不超过49 3　密度　g/cm3　≤ 1.60 4　熔体质量流动速率　X ＜10　g/10min　X ±2 　　10≤X＜20　　X ±3 　　X   ≥ 20　　X ±4 5　拉伸强度　MPa　≥35 6　弯曲强度　MPa　≥50 7　冲击强度　KJ/m2　≥4

Compounding of polylactic acid and calcium carbonate for injection molding

T/SHPTA 049-2023 高抗冲玻纤增强改性聚丙烯粒子

本文件给出了高抗冲玻纤增强改性聚丙烯粒子的术语和定义、命名规则、技术要求、试验方法、检验规则、标志、包装、运输和贮存

High impact reinforced polypropylene particles with glass fiber

T/SHPTA 048-2023 无卤阻燃玻纤增强高温尼龙塑料粒子

本文件规定了无卤阻燃玻纤增强高温尼龙塑料粒子的分类、命名、要求、试验方法、检验规则、标志、标签和随行文件以及包装、运输和贮存

Halogen-free flame retardant glass fiber enhanced high-temperature nylon plastic particles

ASTM D3548-09(2023) 丙烯酸乙酯的标准规范

1.1  This specification covers ethyl acrylate (99 % grade) for use in paint, varnish, lacquer, and related products. 1.2  The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29 . 1.3  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4  For specification hazard information and guidance, see the supplier’s Safety Data Sheet for materials listed in this specification. 1.5  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in 4.1 . 1.6  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Ethyl Acrylate

ASTM D2463-23 吹塑热塑性容器耐跌落冲击性的标准试验方法

Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

ASTM D6835-23 热塑性弹性体醚酯模塑和挤压材料（TEEE）的标准分类系统

Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)