83.140.01 橡胶和塑料制品综合 标准查询与下载

T/ZZB 1624-2020 食品包装用PLA杯

本标准规定了食品包装用PLA杯的术语和定义、基本要求、技术要求、检验方法、检验规则、标志、标签、包装、运输和贮存、质量承诺。 本标准适用于以PLA树脂为主要原料制成的一次性冷饮具。

PLA cup for food packaging

T/ZZB 1657-2020 切边式联组普通V带

本标准规定了切边式联组普通V带（以下简称联组带）的术语和定义、结构、型号与标记、基本要求、技术要求、试验方法、检验规则、标识、包装、运输和贮存、质量承诺。 本标准适用于农业机械、矿山机械、中大型客车空调等机械传动装置用的切边式联组普通V带。

Cut-edged joined classical V-belts

ASTM F1927-20 用库仑检测器测定在受控相对湿度下通过阻挡材料的氧气传输速率、渗透性和渗透性的标准试验方法

1.1 This test method covers a procedure for determination of the rate of transmission of oxygen gas, at steady-state, at a given temperature and %RH level, through film, sheeting, laminates, co-extrusions, or plastic-coated papers or fabrics. This test method extends the common practice dealing with zero humidity or, at best, an assumed humidity. Humidity plays an important role in the oxygen gas transmission rate (O2GTR) of many materials. This test method provides for the determination of oxygen gas transmission rate (O2GTR), the permeance of the film to oxygen gas (PO2), the permeation coefficient of the film to its thickness (P”O2), and oxygen permeability coefficient (PʹO2) in the case of homogeneous materials at given temperature and %RH level(s). 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 9. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

T/JYPA 001-2020 硬质塑料容器

1  内容范围 本标准规定了硬质塑料容器的主要内容： （1）范围                    ：规定标准的内容结构和适用对象； （2）规范性引用文件   ：列出标准中引用到的标准及技术文件； （3）术语和定义          ：规定了包含的产品类型、术语的定义； （4）分类和标记          ：规定产品的分类和标记方法； （5）要求                     ：规定产品的技术要求； （6）实验方法              ：规定产品性能要求和实验环境、方法； （7）检验规则              ：规定产品检验的项目和检验规则； （8）标志、标签           ：规定产品包装标志、标签内容方面的要求； （9）包装、运输、贮存 ：规定产品包装、运输、贮存等方面的要求； （10）附录规定了盈满容量、总容量与额定容量之差的实验方法。 2  产品类型 本标准规定的硬质塑料容器包括以下产品类型：塑料瓶、塑料罐、塑料盆、塑料箱/筒、塑料桶、塑料盒、塑料杯。 3  要求的确定 根据收集到的会员企业标准、广东省地方标准《硬质塑料容器》（DB44/T 503-2008）及编制说明，相关产品的检验报告，确定产品盈满容量、总容量与额定容量之差的要求，外观、抗破裂性、悬吊变形率、色牢度、耐温等方面的要求。 （1）盈满容量、总容量与额定容量之差的要求，规定了： ①  规格不大于5升的瓶、罐、盒、杯盈满容量与额定容量之差； ②  规格不大于20升的箱 / 筒盈满容量、总容量与额定容量之差； ③  规格不大于60升的盆 / 桶盈满容量、总容量与额定容量之差。 （2）从外形、颜色、黑点杂质、气泡及其他方面规定合格产品的外观要求； （3）抗破裂性：规定空容器及承载容器两个条件下跌落的抗破裂性； （4）悬吊变形率：规定不同上口直径（圆形）、上口长轴（椭圆形）或最长边（矩形或其他）容器的变形率，瓶不用检测该项目； （5）色牢度：用药棉浸100℃的热水在容器表面上来回摩擦五次应无染色。 （6）耐温试验： ①  有标称使用温度的容器按标称温度度做2h的高低温循环试验。 ②  没有标称使用温度的容器分别在55℃和-10℃环境中保持2h应不变形或破裂。 4  实验方法的确定 针对要求逐项列出实验方法，参考了企业实验情况资料、企业标准、广东省地方标准《硬质塑料容器》（DB44/T 503-2008）及国家标准相关规定来确定。 规定了产品盈满容量、总容量与额定容量之差的要求，外观、抗破裂性、悬吊变形率、色牢度、耐温等方面的实验要求。 5  检验规则 产品分出厂检验和型式检验。 规定组批的规则，每批数量不得超过10000只。 规定出厂检验和型式检验各自的检验条件、检验项目、抽样方案、抽样方法、判定规则和复验规则。 6  标志、标签、包装、运输和贮存 规定产品包装标志、标签、包装、运输和贮存方面的要求。 7  附录 附录详细说明了一种重量分析法，以供测量额定容量最大值达5L的塑料瓶、罐、盒、杯,达20L的塑料箱、筒，以及达到60L的塑料盆、桶。

Rigid plastics containers

T/CSRE 14002-2020 聚氯乙烯用稀土环保热稳定剂

本标准规定了聚氯乙烯用稀土环保热稳定剂的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于通过合成、复配稀土化合物、润滑剂等助剂而成的热稳定剂，该助剂对聚氯乙烯等高分子材料的加工具有稳定、润滑等作用。

Rare earth environmental heat stabilizer for polyvinyl chloride

T/GDBZ 001-2020 食品接触材料及制品 1,1'-磺酰基二（4-氯苯）迁移量的测定

本标准规定了食品接触材料及制品中1,1'-磺酰基二（4-氯苯）迁移量的测定方法。 本标准适用于食品接触用塑料材料及制品中1,1'-磺酰基二（4-氯苯）迁移量的测定。

Determination of the migration of 1,1'-sulfonyl bis(4-chlorobenzene) in food contact materials and products

T/GDBZ 002-2020 食品接触材料及制品 4,4'-联苯二酚迁移量的测定

本标准规定了塑料食品接触材料及制品中4,4'-联苯二酚迁移量的测定方法。 本标准适用于食品接触用塑料材料及制品中4,4'-联苯二酚迁移量的测定。

Determination of migration of 4,4'-biphenol in food contact materials and products

QB/T 5494-2020 淀粉基蔬菜水果托盘

Starch-based vegetable and fruit tray

ASTM D6778-20 聚甲醛模塑和挤压材料（POM）规范的标准分类系统和基础

1.1 This classification system covers polyoxymethylene materials suitable for molding and extrusion. This classification system allows for the use of polyoxymethylene plastic materials that are recycled, reconstituted, recycled-regrind, recovered, or reprocessed, or combination thereof, provided that the requirements as stated in this specification are met. It is the responsibility of the supplier and the buyer of recycled, reconstituted, recycled-regrind, recovered, or reprocessed polyoxymethylene plastic materials, or combination thereof, to ensure compliance. (See Guide D7209). 1.2 The properties included in this standard are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are to be specified by using suffixes as given in Section 5. 1.3 This classification system and subsequent line callout (specification) are intended to provide a means of calling out plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection can be made by those having expertise in the plastic field only after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this standard. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 The following precautionary caveat pertains only to the test method portion, Section 11, of this classification system. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—This classification system is similar to ISO 29988-1/-2, although the technical content is significantly different. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

T/ZZB 1521-2020 室内装修装饰材料 人造鹅卵石

本标准规定了室内装修装饰材料用人造鹅卵石（以下简称为人造鹅卵石）的术语和定义、基本要求、产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于以合成树脂或再生塑料颗粒为原材料，通过注塑成型具备天然鹅卵石表观造型的，用于室内装修装饰的塑料制品。

Indoor decorating and refurbishing materials—Artificial pebble

ASTM D7611/D7611M-20 树脂识别用塑料制品编码的标准实施规程

Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

SN/T 5271-2019 橡胶和橡胶制品 氟橡胶 热重分析法测定硫化和未硫化胶的成分

Rubber and rubber products fluorine rubber thermogravimetric analysis method to determine the composition of vulcanized and unvulcanized rubber

T/ZZB 1486-2019 聚全氟乙丙烯（FEP）树脂

本标准规定了聚全氟乙丙烯（FEP）树脂的分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于经造粒后的注塑和挤塑用的聚全氟乙丙烯（FEP）树脂。

Fluorinated ethylene-propylene(FEP) resin

QB/T 5413-2019 聚乳酸热成型杯

Polylactic acid thermoformed cup

QB/T 5415-2019 聚乳酸注塑餐具

Polylactic acid injection molded tableware

QB/T 5414-2019 聚乳酸热成型杯盖

Polylactic acid thermoformed cup lid

MT/T 317-2019 煤矿用输送带整体带芯

Coal mine conveyor belt integrated core

MT/T 962-2019 煤矿带式输送机滚筒用包覆层

Coal mine belt conveyor roller coating

T/ZZB 1376-2019 四导柱精密合模机

本标准规定了四导柱精密合模机的术语和定义、型式与参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及质量承诺。 本标准适用于全液压、合模力为 70T～600T 的四导柱精密合模机（以下简称合模机）。

Four-pillar precision die spotting press

KS M ISO 12017:2019 塑料 - 聚（甲基丙烯酸甲酯）双层和三层皮肤 - 测试方法

Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods