83.140.01 橡胶和塑料制品综合 标准查询与下载

T/DLQG 1003-2017 果蔬物流塑料箱

项目特点：本标准产品克服了传统包装物使用中的存在不足之处，产品突出优点在于，增进商品销售美观感；降低物流成本，节约资源；贮运保管快捷方便、安全卫生。本标准包装物能够满足现代农副产品加工业的产品包装需要。 项目先进性:国内没有与本标准相关产品的国家标准和行业标准。本标准技术水平为国内先进水平。因此，本标准项目对指导和规范农副产品加工企业、塑料制品制造企业的有序竞争、科学发展，维护消费者的合法权益，更好地为贸易服务，保持包装产业经济的良性循环可持续健康发展，作用突出。 项目创新性：本标准创新性对产品表面存

Fruit and vegetable logistics plastic box

T/DLQG 1004-2017 鲜蛋物流塑料箱

项目特点：本标准产品特点在于：大大提高鲜蛋物流作业效率；增进商品销售美观感；降低鲜蛋破损率和物流成本，节约资源；贮运保管、销售安全卫生、快捷方便。 项目先进性：国内无同类产品的国家标准、行业标准。本标准技术水平为国内先进水平。 本标准产品能够满足现代商业鲜蛋物流配送要求，降低鲜蛋损耗，提高鲜蛋销售展示效果，需要大力推广应用有节能环保作用的塑料箱。实践证明，本标准的鲜蛋物流塑料箱市场增长潜力很大。 项目创新性： 本标准项目创新性在于：对产品表面存在的气泡、穿孔、塑化不良、鱼眼、僵块等瑕疵作出了相关的

Fresh egg logistics plastic box

T/DLQG 1007-2017 工业品零部件物流塑料箱

项目特点：本标准具有的特点：使用综合成本低，周转效率高；物流作业速度快，费用消耗少；循环使用次数多，节约环境资源；包装、贮存管理安全、快捷方便。因此，该标准产品是现代工业智造企业推广应用的节能型工业品零部件物流塑料箱。 项目先进性:本标准科技水平为国内先进水平。国内无同类产品的国家标准和行业标准。本产品解决了传统包装物使用中表现的诸多不足。产品的突出优点为：使用综合成本低，周转效率高；物流作业速度快，费用消耗少；循环使用次数多，节约环境资源；包装、贮存管理安全、快捷方便。因此，该标准产品是现代工业智造企

Industrial parts logistics plastic box

T/DLQG 1001-2017 食品物流塑料箱

项目特点 :本标准产品特点：增进商品销售美观感；降低物流成本，节约资源；贮运保管快捷方便、安全卫生等。因此，食品相关工商企业将大量应用塑料食品箱。  项目先进性:本标准技术水平为国内先进水平。因此，该标准项目对指导和规范生产企业有序竞争、科学发展，维护消费者的合法权益，更好地为贸易服务，保持包装产业经济的良性循环可持续健康发展，具有重要意义。 项目创新性：GB/T5737-1995《食品塑料周转箱》的相关指标要求较为宽泛，无法满足现代化食品物流的需要。国内无相关产品的行业标准。本标准在技术方面对产品的

Plastic box for food logistics

T/DLQG 1006-2017 鲜奶物流塑料箱

项目特点：本标准产品克服了传统包装物在使用中存在的许多不足之处，解决了传统包装的技术难题。标准产品的优势在于：鲜奶在包装、储运、贮存、销售展示等环节安全、快捷方便、美观；适应现代标准化物流需要，综合物流成本低；对商品无污染，节约材料资源。 项目先进性：国内无同类产品的国家标准和行业标准。本标准技术水平为国内先进水平。为养殖业发展和软包装商品的物流质量提供有效保障。   项目创新性：本标准技术创新性在于：详尽规定了产品表面的气泡、穿孔、塑化不良、鱼眼、僵块等瑕疵及标识位置、贮存等指标要求；为满足物流标准

Fresh milk logistics plastic box

T/DLQG 1005-2017 啤酒物流塑料箱

项目特点：本标准产品特点：产品在低温环境下机械强度明显提高；降低物流使用成本，节约原料资源；贮运保管快捷方便、装卸作业效率高。因此，啤酒制造和流通环节的工商企业广泛应用该啤酒物流塑料箱。 项目先进性：本标准科技水平为国内先进水平。因此，该标准项目对指导和规范生产企业有序竞争、科学发展，维护消费者的合法权益，更好地为贸易服务，保持包装产业经济的良性循环可持续健康发展，具有重要意义 项目创新性：GB/T 5738-1995《瓶装酒、饮料塑料周转箱》国家标准的技术指标要求较为简单、落后，无法满足实际需要。国

Beer logistics plastic box

T/FSI 001.1-2016 电力电气用液体硅橡胶绝缘材料 第1部分：复合绝缘用

术语和定义、要求、试验方法、检验规则、标志、包装、运输、贮存

Liquid silicone rubber insulating material for electric and electrical application——Part 1：Compositeinsulating

DB13/T 2472-2017 一次性食品包装用塑料工具通用技术要求

General technical requirements for plastic tools for disposable food packaging

ASTM D7568-17 用于室外应用的聚乙烯基结构级塑料木材的标准规范

1.1 This specification covers a type of plastic lumber product, defined as polyethylene-based structural-grade plastic lumber (SGPL), for use as main framing members, including joists, stringers, beams, columns; and secondary framing members, including planking, posts and bracing; in outdoor structures such as decks, boardwalks, docks, and platforms. 1.2 This specification is applicable to solid, rectangular SGPL products where polyethylene resin (non cross-linked) is the continuous phase and is at least 50 % of the product (by weight). 1.3 This specification is not applicable to plastic lumber products containing cellulosic materials as additives, fillers or fiber reinforcements. 1.4 SGPL products covered by this specification shall not be used as tensile members. 1.5 SGPL products are produced using several different manufacturing processes. These processes utilize a number of polyethylene resin material systems that include varying proportions of fillers, fiber reinforcements, and other chemical additives. 1.6 Due to thermodynamic effects that result in outersurface densification during manufacture, SGPL products are typically non-homogeneous in the cross-section. This standard does not address materials that have been modified from their original cross-section. 1.6.1 The cross-section non-homogeneity is addressed in the material property assessments in this document only for applications in which the product cross-section is not modified by cutting, notching, or drilling. For products modified in this manner, additional engineering considerations are required and they are beyond the scope of this document. 1.7 For purposes of this standard, an SGPL product is a specific combination of polyethylene resin, together with fillers, reinforcements, and additives. Each formulation is to be identified as a distinct and different product, to be tested and evaluated separately. 1.8 Diverse and multiple combinations of both virgin and recycled polyethylene material systems are permitted in the manufacture of SGPL products. 1.9 Fiber reinforcements used in SGPL include manufactured materials such as fiberglass (chopped or continuous), carbon, aramid and other polymeric materials. 1.10 A wide variety of chemical additives are typically added to SGPL formulations. Examples include colorants, chemical foaming agents, ultraviolet stabilizers, fire retardants, lubricants, anti-static products, heat stabilizers, and coupling agents. 1.11 Diverse types and combinations of filler systems are permitted in the manufacturing of SGPL products. Fillers that cause the product to fail the requirements of 6.13 are not permitted in the manufacturing of SGPL products. 1.12 In order for a product to be classified as SGPL, it must meet the minimum stress and modulus criteria consistent with the specific product as marked, and additionally the properties specified in Section 6 of this specification. 1.13 This specification pertains to SGPL where any reinforcement is uniformly distributed within the product. When reinforcement is not uniformly distributed, the engineering issues become substantially more complex. For this reason, such products are not covered in this document. 1.14 Products that fail at strains of less than 0.02 (2 %) when tested in flexure in accordance with 6.6 are not compatible with the underlying assumptions of Annex A1 and are beyond the scope of this standard (see Note 1). NOTE 1—Calculation of time-dependent properties in Annex A1 is based on the assumption that the product does not fail in a brittle manner. The 2 % strain limit was selected based on the judgment of the task group members that created Annex A1. 1.15 This specification addresses issues relevant to a buyer’s requirements for SGPL products and has therefore been developed in the format of a procurement specification. 1.16 Criteria for design are included as part of this specification for SGPL products. 1 This specification is under the jurisdiction of ASTM Committee D20 on Plastics and is the direct responsibility of Subcommittee D20.20 on Plastic Lumber. Current edition approved March 1, 2017. Published March 2017. Originally approved in 2012. Last previous edition approved in 2013 as D7568 – 13. DOI:10.1520/D7568–17. *A Summary of Changes section appears at the end of this standard Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 1.17 Use of SGPL members in application will typically require the design of structural connections. Connection design between SGPL members falls outside the scope of this standard. 1.18 The values are stated in inch-pound units, as these are currently the most common units used by the US construction industry. Equivalent SI units are indicated in parentheses. 1.19 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. NOTE 2—There is no known ISO equivalent to this Standard.

Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications

GOST R 57403-2017 医用聚氯乙稀手套. 技术要求

Poly(vinyl chloride) medical gloves. Technical requirements

GOST R 57404-2017 医用手套. 质量评估指南

Medical gloves. Quality assessment guide

GOST R 57402-2017 医用手套. 使用期限的测定

Medical gloves. Determination of expiration dating

ASTM D6779-17 聚酰胺模制和挤制材料(PA)规格的标准分类系统和基础

1.1 This classification system covers polyamide materials suitable for molding and extrusion. Some of these compositions are also suitable for application from solution. 1.2 The properties included in this classification system are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are to be specified by using suffixes as given in Section 5. 1.3 This classification system and subsequent line callout (specification) are intended to provide a means of calling out plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection can be made by those having expertise in the plastic field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this classification system. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 The following precautionary caveat pertains only to the test methods portion, Section 11, of this classification system. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. Note 1: This classification system is similar to ISO8201;1874-1/-2, although the technical content is significantly different.

Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

GOST R 57396-2017 手术用橡胶手套. 技术要求

Rubber surgical gloves. Technical requirements

T/WDWJ 001-2016 刺网通用技术条件

术语和定义、标记、要求、试验方法、检验规则、标志、标签、包装、运输及贮存。

General technical specification for gill nets

T/ZZB 0149-2016 门、窗用未增塑聚氯乙烯（PVC-U）共挤彩色型材

本标准规定了门、窗用未增塑聚氯乙烯（PVC-U）共挤彩色型材的术语和定义、材料、分类、分级与标记、基本要求、技术要求、检验、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于以未增塑聚氯乙烯为基材，以丙烯腈—苯乙烯—丙烯酸酯三元共聚物（ASA）、聚甲基丙烯酸甲酯（PMMA）或其他材料等作为共挤材料，经共挤挤出成型的门、窗用彩色型材。

Unplasticized polyvinyl chloride(PVC-U) co-extrusion color profiles for the doors and windows

T/ZZB 0052-2016 聚丙烯饮用吸管

本标准规定了聚丙烯饮用吸管（以下简称吸管）的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、包装、标志、运输和贮存、质量承诺。 本标准适用于以聚丙烯（PP）树脂为原料经加工制成的一次性饮用吸管。

Polypropylene drinking straw

DB13/T 2382-2016 聚乙烯（PE）输水带通用技术要求

General technical requirements for polyethylene (PE) water conveyor belts

ASTM D6779-16 聚酰胺成型和挤压材料 (PA) 规格的标准分类系统和基础

1.1 This classification system covers polyamide materials suitable for molding and extrusion. Some of these compositions are also suitable for application from solution. 1.2 The properties included in this classification system are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are to be specified by using suffixes as given in Section 5. 1.3 This classification system and subsequent line callout (specification) are intended to provide a means of calling out plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection can be made by those having expertise in the plastic field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this classification system. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 The following precautionary caveat pertains only to the test methods portion, Section 11, of this classification system. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. Note 1: This classification system is similar to ISO8201;1874-1/-2, although the technical content is significantly different.

Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

GOST R 57156-2016 可漂浮的闭孔酚醛泡沫. 通用技术要求

Phenolic foam with close cells for float. General technical requirements