83.140.01 橡胶和塑料制品综合 标准查询与下载

GOST R 57203-2016 装饰面板用冲击改性酚醛泡沫. 通用技术要求

Phenolic impact-modified foam for finishing panels. General technical requirements

ASTM D6117-16 塑料木材和型材的机械紧固件的标准试验方法

6.1 The resistance of plastic lumber and shapes to direct withdrawal of nails, staples, or screws is a measure of its ability to hold or be held to an adjoining object by means of such fasteners. Factors that affect this withdrawal resistance include the physical and mechanical properties of the plastic lumber and shapes; the size, shape, and surface condition of the fasteners; the speed of withdrawal; physical changes to plastic lumber and shapes or fasteners between time of driving and time of withdrawal; orientation of fiber axis; the occurrence and nature of prebored lead holes; and the temperatures during insertion and withdrawal. These factors will be as circumstances dictate, and representative of the normal manufacturing process. 6.2 By using a standard size and type of nail, staple, or screw, withdrawal resistance of plastic lumber and shapes can be determined. Throughout the method this is referred to as the basic withdrawal test. Similarly, comparative performances of different sizes or types of nail, staple, or screw can be determined by using a standard procedure with a particular plastic lumber and shape, which eliminates the plastic lumber and shapes product as a variable. Since differences in test methods can have considerable influence on results, it is important that a standard procedure be specified and adhered to, if test values are to be related to other test results. 1.1 These test methods cover the evaluation of fastener use with “as manufactured” plastic lumber and shapes through the use of two different testing procedures. 1.2 The test methods appear in the following order:     Sections   Test Method A—Nail, Staple, or Screw Withdrawal Test 4 to 13   Test Method B—Lateral Nail, Staple, or Screw Resistance Test 14 to 22 1.3 Plastic lumber and plastic shapes are currently made predominately from recycled plastics. However, these test methods would also be applicable to similar manufactured plastic products made from virgin resins where the product is non-homogeneous in the cross-section. 1.4 The values stated in inch-pound units are to b......

Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

ASTM D6779-16 聚酰胺成型和挤压材料 (PA) 规格的标准分类系统和基础

1.1 This classification system covers polyamide materials suitable for molding and extrusion. Some of these compositions are also suitable for application from solution. 1.2 The properties included in this classification system are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are to be specified by using suffixes as given in Section 5. 1.3 This classification system and subsequent line callout (specification) are intended to provide a means of calling out plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection can be made by those having expertise in the plastic field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this classification system. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 The following precautionary caveat pertains only to the test methods portion, Section 11, of this classification system. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. Note 1: This classification system is similar to ISO8201;1874-1/-2, although the technical content is significantly different.

Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

ASTM D4495-16 采用下落重量测定聚氯乙烯 (PVC) 刚性型材的耐冲击性的标准试验方法

5.1 The impact strength of PVC profiles relates to suitability for service and to quality of processing. Impact tests are used for quality-control purposes and as an indication that products can withstand handling during assembling, installation, or in service. 5.2 Results obtained by use of this test method are used in two ways: 5.2.1 As the basis for establishing impact-test requirements in product standards, and 5.2.2 To measure the effect of changes in materials or processing. 1.1 This test method covers the determination of the energy required to crack or break rigid poly(vinyl chloride) (PVC) profile under specified conditions of impact by means of a falling weight. 1.2 This test method is used either by itself or in conjunction with other methods for measuring PVC product toughness. 1.3 Because of the wide variety of profile sizes and shapes and the wide variety of manufacturing procedures and field abuse, this test method does not correlate universally with all types of abuse. Therefore, correlations must be established as needed. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.5 The values stated in inch-pound units are to be regarded as the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: There is no known ISO equivalent to this standard.

Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

ASTM D8015-15 弹性体和橡胶材料暴露于气态烃环境的尺寸变化的标准测试方法

5.1 The information provided by this test method is useful for manufacturing quality control, technical service, and research purposes; and is required by various material specifications. 5.2 This method is suitable for all elastomer or rubber materials. 1.1 This standard gives the testing procedure to determine the change in dimensions of specimens of rubber or elastomeric materials, or both, resulting from exposure to gaseous hydrocarbon environments. The size of the specimens is such to facilitate preparation from as molded component configurations such as gaskets and seals. Where agreed to by both parties molded specimens may be used. Dimensional measurements are made prior to and after conditioning in a formulated test gas. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments

DB13/T 2250-2015 PVC塑料透明软板

PVC plastic transparent soft board

QB/T 4881-2015 再生和回收塑料制品安全技术条件

本标准规定了再生和回收塑料制品中有害物质控制的安全技术要求、取样和样品制备方法、试验方法和判定规则。 本标准适用于再生和回收塑料用量在50%以上的塑料制品。 本标准不适用于食品接触、医用产品、玩具、文具及超出相关法律法规限定的制品。

Safety technical specifications for reworked and recycled plastic products

GSO ISO 3302-1:2015 橡胶 产品公差 第1部分：尺寸公差

This part of ISO 3302 specifies classes of dimensional tolerances and their values for moulded, extruded, and calendared solid rubber products. The relevant test methods necessary for the establishment of compliance with this part of ISO 3302 are also specified. The tolerances are primarily intended for use with vulcanized rubber but can also be suitable for products made of thermoplastic rubbers. This part of ISO 3302 does not apply to precision toroidal sealing rings or to calendared composite products such as rubber-coated fabrics or products where a rubber coating is applied by the process of topping or skim coating.

Rubber -- Tolerances for products -- Part 1: Dimensional tolerances

GSO ISO 3302-2:2015 橡胶 产品公差 第2部分：几何公差

This part of ISO 3302 specifies the following geometrical tolerances for moulded and extruded solid rubber products, including those with metal inserts: — flatness tolerance; — parallelism tolerance; — perpendicularity tolerance; — coaxiality tolerance; — positional tolerance. The tolerances are primarily intended for use with vulcanized rubber but may also be suitable for products made of thermoplastic rubbers.

Rubber -- Tolerances for products -- Part 2: Geometrical tolerances

DB44/T 1523-2015 生活用纸常用原料种类鉴别 纤维细胞形态特征法

本标准规定了通过纤维细胞形态特征鉴别生活用纸常用原料种类的方法。 本标准适用于生活用纸。

Differentiation method of fibroblast morphological characteristics of commonly used raw materials for household paper

DB65/T 3705-2015 塑料薄膜及薄片 干热大气暴露试验方法

Plastic film and sheet dry heat atmospheric exposure test method

ASTM D5418-15 塑料的标准试验方法: 动态机械性能: 承弯 (双悬臂梁)

5.1 This test method provides a simple means of characterizing the thermomechanical behavior of plastic compositions using a very small amount of material. Since small test specimen geometries are used, it is essential that the specimens be representative of the material being tested. The data obtained can be used for quality control and/or research and development purposes. For some classes of materials, such as thermosets, it can also be used to establish optimum processing conditions. 5.2 Dynamic mechanical testing provides a sensitive means for determining thermomechanical characteristics by measuring the elastic and loss moduli as a function of frequency, temperature, or time. Plots of moduli and tan delta of a material versus these variables can be used to provide a graphic representation indicative of functional properties, effectiveness of cure (thermosetting-resin systems), and damping behavior under specified conditions. 5.3 This test method can be used to assess the following: 5.3.1 The modulus as a function of temperature or aging, or both, 5.3.2 The modulus as a function of frequency, 5.3.3 The effects of processing treatment, including orientation, induced stress, and degradation of physical and chemical structure, 5.3.4 Relative resin behavioral properties, including cure and damping, 5.3.5 The effects of substrate types and orientation (fabrication) on elastic modulus, 5.3.6 The effects of formulation additives that might affect processability or performance, 5.3.7 The effects of annealing on modulus and glass transition temperature, 5.3.8 The effect of aspect ratio on the modulus of fiber reinforcements, and 5.3.9 The effect of fillers, additives on modulus and glass transition temperature. 5.4 Before proceeding with this test method, refer to the specification of the material being tested. Any test specimen preparation, conditioning, dimensions, or testing parameters, or combination thereof, covered in the relevant ASTM material specification shall take precedence over those mentioned in this test method. If there are no relevant ASTM material specifications, then the default conditions apply. 1.1 This test method outlines the use of dynamic mechanical instrumentation for determining and reporting the viscoelastic properties of thermoplastic and thermosetting resins and composite systems in the form of rectangular bars molded directly or cut from sheets, plates, or molded shapes. The elastic modulus data generated may be used to identify the thermomechanical properties of a plastics material or composition.

Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

GOST R 56712-2015 面板多层聚碳酸酯. 规格

Panel multilayer polycarbonate. Specifications

GSO 2443:2014 由玻璃纤维增强塑料和聚酯树脂制成的饮用水箱 用于地下应用

This standard defines the requirements for Glass Reinforced Plastic(GRP) tanks for underground applications to be used for potable water and other drinking water Purposes which manufactured for lee than 66 C˚ applications.

POTABLE WATER STORAGE TANKS MANUFATURED FROM FIBERGLASS REINFORCED PLASTICS WITH POLYESTER RESINS FOR UNDERGROUND APPLICATION

GSO ISO 13000-1:2014 塑料 聚四氟乙烯 (PTFE) 半成品 第1部分：要求和设计

ISO 13000-1:2005 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application.

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products -Part 1: Requirements and designation

GSO ISO 13000-2:2014 塑料材料聚四氟乙烯（PTFE）半成品 第2部分：测试样品的制备和性能测定

This part of ISO 13000 specifies the preparation of test specimens and gives the test methods applicable to semi-finished products of polytetrafluoroethylene (PTFE).

Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties

DB45/T 1107-2014 铝型材表面用PE保护膜验收技术规范

Technical specification for acceptance of PE protective film on the surface of aluminum profiles

DB44/T 1453-2014 湿式潜水服

本标准规定了湿式潜水服的术语和定义、质量要求、试验方法、检验规则、标识、标志、包装、运输和贮存。 本标准适用于以氯丁橡胶海绵为主要原料，用缝线及胶粘剂缝合、粘结而成的湿式潜水服。

wetsuit

DB22/T 2106-2014 聚乳酸制品通用技术要求

General technical requirements for polylactic acid products

NF T47-001-1*NF ISO 3302-1:2014 橡胶. 产品公差. 第1部分: 尺寸公差

La présente partie de l'ISO 3302 spécifie les catégories de tolérances dimensionnelles et leurs valeurs pour les produits en caoutchouc solides moulés, extrudés, et calandrés. Les méthodes d'essai appropriées nécessaires à l'établissement de la conformité à la présente partie de l'ISO 3302 sont également spécifiées.Ces tolérances sont destinées principalement au caoutchouc vulcanisé, mais elles peuvent également convenir aux produits à base de caoutchoucs thermoplastiques.La présente partie de l'ISO 3302 n'est pas applicable aux joints toriques de précision, ni aux produits composites calandrés tels que les supports textiles revêtus de caoutchouc ou les pro

Rubber - Tolerances for products - Part 1 : dimensional tolerances