83.140.10 薄膜和薄板 标准查询与下载

T/ZZB 2304-2021 辐射致（制）冷膜

本文件规定了辐射致（制）冷膜的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于建筑物、构筑物围护结构外表面使用的、具有高太阳光反射比和高大气窗口发射率的辐射致（制）冷膜。

Radiative cooling film

LST EN ISO 14632:2021 聚乙烯挤塑板（PE-HD） 要求和测试方法（ISO 14632:2021）

Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)

BS EN ISO 12017:2021 塑料 聚（甲基丙烯酸甲酯）双层和三层片材 测试方法

Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods

SN EN ISO 7823-3:2021 塑料 聚（甲基丙烯酸甲酯）板材 类型、尺寸和特性 第3部分：连续铸造板材（ISO 7823-3:2021）

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2021)

SN EN ISO 12017:2021 塑料 聚（甲基丙烯酸甲酯）双层和三层板材 测试方法（ISO 12017:2021）

Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:2021)

SN EN ISO 14631:2021 抗冲改性聚苯乙烯挤塑板（PS-I） 要求和测试方法（ISO 14631:2021）

Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:2021)

SN EN ISO 14632:2021 聚乙烯挤塑板（PE-HD） 要求和测试方法（ISO 14632:2021）

Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)

DS/EN ISO 12017:2021 塑料“聚（甲基丙烯酸甲酯）双层和三层板材”测试方法（ISO 12017:2021）

Plastics – Poly(methyl methacrylate) double- and triple-skin sheets – Test methods (ISO 12017:2021)

T/CPF 0016-2021 铝塑复合重型包装袋

铝塑复合重型包装袋的要求，包括对产品感官、印刷质量、尺寸偏差、物理机械性能的要求，以及对应的检验方法。

Aluminum-plastic composite heavy-duty packaging bag

DS/ISO 12017:2021 塑料“聚（甲基丙烯酸甲酯）双层和三层板材”测试方法

Plastics – Poly(methyl methacrylate) double- and triple-skin sheets – Test methods

OENORM EN 15354-2021 塑料 由增塑聚氯乙烯（PVC-P）制成的挤压和/或压延非增强薄膜和片材 特性和名称

Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Characterisation and designation

OENORM EN 17679-2021 塑料薄膜的试验 使用带切口的梯形试样的撕裂试验

Testing of plastics films - Tear test using trapezoidal test specimen with incision

BS EN ISO 14631:2021 抗冲改性聚苯乙烯(PS-I)挤出片材 要求及测试方法

Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods

DS/EN ISO 14631:2021 抗冲改性聚苯乙烯（PS-I）挤塑板的要求和测试方法（ISO 14631:2021）

Extruded sheets of impact-modified polystyrene (PS-I) – Requirements and test methods (ISO 14631:2021)

DS/ISO 14631:2021 抗冲改性聚苯乙烯（PS-I）挤塑板材的要求和试验方法

Extruded sheets of impact-modified polystyrene (PS-I) – Requirements and test methods

BS ISO 17555:2021 塑料 薄膜和片材 双向拉伸聚丙烯(PP)薄膜

Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films

BS EN ISO 7823-3:2021 塑料 聚（甲基丙烯酸甲酯）片材 类型、尺寸和特性 连铸板材

Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Continuous cast sheets

GSO ISO 15987:2021 塑料 薄膜和片材 双向拉伸聚酰胺（尼龙）薄膜

ISO 15987:2003 specifies biaxially oriented transparent polyamide (nylon) films, mainly used for packaging, either alone and/or as laminated film with other films.

Plastics — Film and sheeting — Biaxially oriented polyamide (nylon) films

GSO EN 15836-2:2021 塑料 地下游泳池用塑化聚氯乙烯 (PVC-P) 膜 第2部分：标称厚度等于或大于 1.5 毫米的增强膜

This European Standard specifies the visual, dimensional, mechanical and durability characteristics of reinforced membranes made of plasticized poly(vinyl chloride) (PVC-P) sheets assembled together a polyester reinforcement, whose nominal thickness is greater than or equal to 1,5 mm, intended to be used to contribute to the leaktightness of inground swimming pools, implemented in situ. It also specifies the characteristics of the composition of the PVC-P used to produce the membranes. It applies specifically to reinforced membranes intended for use in swimming pools where the water temperature is less than or equal to 32 °C. If the membrane manufacturer permits a temperature of water continuously maintained above 32 °C, this document also applies.

Plastics- Plasticized poly (vinyl chloride) (PVC-P) membranes for inground swimming pools Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm

GSO ASTM C1349:2021 建筑平板玻璃包覆聚碳酸酯的标准规范

This specification covers the quality requirements for cut sizes of architectural flat glass clad polycarbonate (GCP) for use in buildings as security, detention, hurricane/cyclic wind-resistant, and blast and ballistic-resistant glazing applications. Architectural polycarbonates furnished under this specification shall be of the following kinds: Kind GCP, single core (SC); Kind GCP, multiple core (MC); and Kind GCP, others (O). The polycarbonates shall be examined by means of the following: security test; impact test for safety glazing; missile impact and cyclic pressure test; security glazing test; airblast loading test; detention glazing test; bullet resisting glazing test; burglary resisting test; visual inspection; and transmittance test. The materials shall also adhere to specified size and dimensional requirements, and maximum allowable blemishes in form of bubbles, edge boil blow-ins, fuses, single strand lint hairs, inside dirt spots, areas of concentrated lint, delamination and discoloration, short interlayer and unlaminated area chips, streaks and scuffs, white scratches, carbon specks, and crizzles.

Standard Specification for Architectural Flat Glass Clad Polycarbonate