83.140.10 薄膜和薄板 标准查询与下载

GSO EN 15836-2:2021 塑料 地下游泳池用塑化聚氯乙烯 (PVC-P) 膜 第2部分：标称厚度等于或大于 1.5 毫米的增强膜

This European Standard specifies the visual, dimensional, mechanical and durability characteristics of reinforced membranes made of plasticized poly(vinyl chloride) (PVC-P) sheets assembled together a polyester reinforcement, whose nominal thickness is greater than or equal to 1,5 mm, intended to be used to contribute to the leaktightness of inground swimming pools, implemented in situ. It also specifies the characteristics of the composition of the PVC-P used to produce the membranes. It applies specifically to reinforced membranes intended for use in swimming pools where the water temperature is less than or equal to 32 °C. If the membrane manufacturer permits a temperature of water continuously maintained above 32 °C, this document also applies.

Plastics- Plasticized poly (vinyl chloride) (PVC-P) membranes for inground swimming pools Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm

EN ISO 12017:2021 塑料.聚甲基丙烯酸甲酯双合板和三合板的试验方法

Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:2021)

DS/ISO 7823-3:2021 塑料 聚（甲基丙烯酸甲酯）板材 类型、尺寸和特性 第3部分：连铸板材

Plastics – Poly(methyl methacrylate) sheets – Types, dimensions and characteristics – Part 3: Continuous cast sheets

DS/ISO 17555:2021 塑料 薄膜和片材 双向拉伸聚丙烯（PP）薄膜

Plastics – Film and sheeting – Biaxially oriented polypropylene (PP) films

PN-EN 17104-2021-06 E 建筑物内部使用的热塑性硬质防护墙面覆盖板 性能特征

Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics

ISO 12017:2021 塑料 - 聚（甲基丙烯酸甲酯）双层和三层皮肤 - 测试方法

This document specifies the test methods for quality control of poly(methyl methacrylate) (PMMA) extruded double- and triple-skin flat sheets, obtained from colourless and coloured transparent, translucent and opaque grades of materials. The minimum sheet width is 600 mm. The main applications of these sheets are in building and agriculture (greenhouses).

Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods

UNI EN 17104-2021 建筑物内部使用的热塑性硬质防护墙面覆盖板 性能特征

Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics

DS/ISO 14632:2021 聚乙烯挤塑板材（PE-HD）的要求和试验方法

Extruded sheets of polyethylene (PE-HD) – Requirements and test methods

ISO 14631:2021 冲击改性聚苯乙烯挤出片（Ps-I） - 要求和试验方法

This document specifies the requirements and test methods for solid flat extruded sheets of impact- modified polystyrene (PS-I) without fillers and reinforcing materials. This document applies only to thickness 0,25 mm to 20,0 . It also applies to PS-I sheet in roll form.

Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods

ISO 7823-3:2021 塑料 - 聚（甲基丙烯酸甲酯）片 - 类型 尺寸和特性 - 第3部分:连续铸造板

This document specifies requirements for non-modified flat poly(methyl methacrylate) (PMMA) continuous cast sheets for general-purpose use. The sheets can be colourless or coloured, and can be transparent, translucent or opaque. The thickness range of the sheets covered by document is 1 mm to 10 mm.

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets

DS/EN ISO 14632:2021 聚乙烯挤塑板（PE-HD）的要求和测试方法（ISO 14632:2021）

Extruded sheets of polyethylene (PE-HD) – Requirements and test methods (ISO 14632:2021)

T/GDBZ 008-2021 面膜包装用复合膜、袋

本文件规定了面膜包装用复合膜、袋（以下简称膜、袋）的分类、要求、试验方法、检验规则和标志、包装、运输和贮存。 本文件适用于以塑料薄膜(含镀铝、涂布等功能性薄膜)、纸、无纺布、铝箔（AL）的一种或几种为原材料，采用印刷、复合等工艺进行生产的面膜包装用膜、袋。

Composite film and bag for mask packaging

ISO 17555:2021 塑料.薄膜和薄板.双轴取向的聚丙烯薄膜

This document specifies the requirements for biaxially oriented polypropylene (PP) films, which are mainly used for packaging. The film can be used alone or in laminates with other films. This document applies only to films composed of more than 95 % (by mass) of polypropylene.

Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films

EN ISO 7823-3:2021 塑料.聚甲基丙烯酸甲酯薄板.类型,尺寸和特征.第3部分:连续浇铸板

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2021)

EN ISO 14631:2021 冲击性改良聚苯乙烯的挤塑板(PS.I).要求与测试方法

Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:2021)

prEN 15354-2021 塑料 由增塑聚氯乙烯（PVC-P）制成的挤压和/或压延非增强薄膜和片材 特性和名称

Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Characterisation and designation

EN ISO 14632:2021 聚乙烯的挤塑板(PE.HD). 要求与测试方法

Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)

prEN 17679-2021 塑料薄膜的试验 使用带切口的梯形试样的撕裂试验

Testing of plastics films - Tear test using trapezoidal test specimen with incision

T/CPF 0014-2021 绿色设计产品评价技术规范 折叠纸盒

本标准规定了折叠纸盒绿色包装产品评价的术语和定义、评价要求、产品生命周期评价报告编制方法和评价方法。 本标准适用于折叠纸盒类绿色包装产品评价。

Technical specification for green-design product assessment —Folding carton

T/ZZB 2127-2021 食品级同步双向拉伸尼龙薄膜

本文件规定了食品级同步双向拉伸尼龙薄膜（以下简称“BOPA薄膜”）的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于以尼龙6树脂为主要原料，经挤出、同步双向拉伸制得的薄膜。

Foodgrade Synchronous biaxially oriented nylon film