83.140.10 薄膜和薄板 标准查询与下载

KS M ISO 15013:2019 塑料 - 聚丙烯挤出片材（pp） - 要求和测试方法

Plastics — Extruded sheets of polypropylene(PP) — Requirements and test methods

KS M ISO 7823-3:2019 塑料 - 聚（甲基丙烯酸甲酯）片 - 类型 尺寸和特性 - 第3部分:连续铸造板

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets

KS M ISO 7823-2-2019 塑料 - 聚（甲基丙烯酸甲酯）片材 - 类型 尺寸和特性 - 第2部分:挤出片材

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets

KS M ISO 15013-2019 塑料 - 聚丙烯挤出片材（pp） - 要求和测试方法

Plastics — Extruded sheets of polypropylene(PP) — Requirements and test methods

ASTM D1593-19 非刚性氯乙烯塑料薄膜和薄板的标准规范

Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

KS M ISO 8570-2019 塑料薄膜和片材冷裂温度的测定

Plastics — Films and sheeting — Determination of cold-crack temperature

KS M ISO 13636-2019 塑料 薄膜和片材 非取向聚对苯二甲酸乙二醇酯 (PET) 片材

Plastics — Film and sheeting — Non-oriented poly(ethylene terephathalate)(PET) sheets

T/ZZB 1221-2019 聚酰胺/聚乙烯复合液体包装膜、袋

本标准规定了聚酰胺/聚乙烯复合液体包装膜、袋的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺。 本标准适用于聚酰胺/聚乙烯复合制成的液体包装膜、袋。

Packaging film and bag of polyamide and polyethylene composites for the liquid

T/GDEIA 14-2019 卷烟包装用双向拉伸聚丙烯收缩膜

  本标准规定了卷烟包装用双向拉伸聚丙烯收缩膜厚度偏差、横向厚度极差、宽度偏差、拉伸强度（纵向横向）、断裂伸长率（纵向横向）、弹性模量（纵向）雾 度　耐磨性能（外面/外面）、磨后雾度差值、光泽度、热封温度范围、热封强度（外面/外面，内面b/内面）热收缩率（横、纵）、动摩擦系数（外面a/外面）、透湿量，以及试验方法、检验规则等技术内容，并经过检测验证可行。

Biaxially-stretched polypropylene shrink film for cigarette packaging

BS EN ISO 11833-1:2019 塑料 未增塑的聚氯乙烯片材 厚度不小于1毫米板材的类型、尺寸和特性

What is ISO 11833-1 about?   ISO 11833-1 is the first part of the multi-series European standard and provides dimensions, characteristics and types of plastic polycarbonate sheets    ISO 11833-1 specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC-U) and the test methods to be used to measure the required values.   ISO 11833-1 applies only to sheets of thickness, not less than 1,0 mm.   Note:

Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics for sheets of thickness not less than 1 mm

BS EN ISO 11963:2019 塑料 聚碳酸酯板 类型、尺寸和特性

What is ISO 11963 about? ISO 11963 provides dimensions, characteristics and types of plastic polycarbonate sheets. ISO 11963 specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p′-isopropylarene-diphenyl carbonate). The sheets can be coloured or colourless, and they can be transparent, translucent, or opaque. The sheets can also be those that have a special weather-protective layer on one or both surfaces. ISO 11963 applies only to thicknesses equal to or greater than 1,5 mm. Who is ISO 11963 for? ISO 11963 on polycarbonate sheets is relevant to: Manufacturers of Polycarbonate sheets Chemical Engineers Researchers and scientists Distributors and suppliers of polycarbonate sheets Why should you use ISO 11963? Polycarbonate is a thermoplastic material that comes in transparent sheets. It is strong and absorbs little moisture, so it is highly resistant to impact and water damage. ISO 11963 specifies all requirements of polycarbonate plastic such as masking, appearance, colour, and dimensions, and measures thickness deviations in particular shapes. Test methods provided by ISO 11963 are designed to assess the durability and quality of polycarbonate samples, and information related to the testing can be provided to the testing operations. Overall,

Plastics. Polycarbonate sheets. Types, dimensions and characteristics

EN ISO 11963:2019 塑料.聚碳酸酯薄板材.交货类型,尺寸和特性

This document specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p′-isopropylidene-diphenyl carbonate). The sheets can be coloured or colourless, and they can be transparent, translucent or opaque. The sheets can also be those that have a special weather-protective layer on one or both surfaces. This document applies only to thicknesses equal to or greater than 1,5 mm.

Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)

ASTM D7192-19 使用负载和位移传感器的塑料膜的高速穿刺性能的标准测试方法

Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors

EN ISO 11833-1:2019 塑料.未塑性聚氯乙烯板材.型号,尺寸和特点.第1部分:厚度不低于1mm 的板材

This document specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC-U) and the test methods to be used to measure the required values. It applies only to sheets of thickness not less than 1,0 mm. It does not cover biaxially stretched PVC-U sheets.

Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)

T/GDEIA 13-2019 烟用包装激光防伪膜

特性指标 项目名称　要求 色差CIE L*a*b*（ΔE*ab）　1：与标准样张目侧对比 2：色差计检测：△L≤±1.3 光密度　1.1～3.9 镀铝层不均匀度，%　≤18 镀铝层附着牢度，%　≥98（仅适用复合膜） 光泽度GS（45°），%　≥15 表面张力， mN/m　≥38 衍射效率ηd  ,%　≥5 a转移类的产品不检测镀铝层附着牢度、表面张力 b信噪比和衍射效率系镭射产品固有特性，不做检测限定 c如客户有需要执行该条款，此注条款应予执行 以及规定了烟用包装激光防伪膜的安全要求，对烟用包装激光防伪膜溶剂残留总量及溶剂杂质总量控制指标做出了具体规定。

Laser anti-counterfeiting film for cigarette packaging

ISO 11963:2019 塑料 - 聚碳酸酯板 - 类型 尺寸和特性

This document specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p′-isopropylidene-diphenyl carbonate). The sheets can be coloured or colourless, and they can be transparent, translucent or opaque. The sheets can also be those that have a special weather-protective layer on one or both surfaces. This document applies only to thicknesses equal to or greater than 1,5 mm.

Plastics — Polycarbonate sheets — Types, dimensions and characteristics

T/GDEIA 01-2019 聚对苯二甲酸乙二醇酯（PET）转移膜

物理及机械性能 项目　单位　优等品指标　合格品指标 抗拉强度　纵向及横向　MPa　≥190　≥180 断裂伸长率　纵向及横向　﹪　≤180　≤200 弹性模量　纵向及横向　MPa　≥3800　≥3500 F5值　纵向及横向　MPa　≥90　≥80 摩擦系数　静　-　≤0.55　≤0.65 　        动　-　≤0.52　≤0.55 热收缩率（150 ℃ 30 min）　纵向　﹪　≤1.8　≤2.0 热收缩率（150 ℃ 30 min）　横向　﹪　≤0.2　≤0.6 光泽度（45°角）　﹪　≥120　≥100 雾度　﹪　≤3.5　≤4.0 表面张力　mN/m　≤43　≤48

Polyethylene terephthalate Transfer film

ISO 11833-1:2019 塑料未增塑聚氯乙烯片材第1部分:厚度不小于1mm片材的类型、尺寸和特性

This document specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC-U) and the test methods to be used to measure the required values. It applies only to sheets of thickness not less than 1,0 mm. It does not cover biaxially stretched PVC-U sheets.

Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm

ASTM D3595-14(2019) 聚氯三氟乙烯的标准规格

Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

ASTM D3595-14(2019)e1 聚氯三氟乙烯的标准规格

1.1 This specification covers extruded sheet and film in thicknesses from 0.015 to 0.25 mm (0.0006 to 0.01 in.). 1.2 The values stated in SI units shall be regarded as the standard. 1.3 The following precautionary statement pertains only to the test methods portion, Section 9 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film