83.140.20 层压薄板 标准查询与下载

NF T54-301-2:2005 装饰用高压层压板(HPL).热固性树脂基板材(一般被称为层压板).第2部分:性能测定

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2 : determination of properties.

NF T54-301-4:2005 高压装饰性层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第4部分:厚度为2毫米和大于2毫米的压实层压制件的分类和规范

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually caused laminates) - Part 4 : classification and specifications for compact laminates of thickness 2 mm and greater.

ANSI/NEMA LD-3-2005 高压装饰层压板

This Standards Publication covers high-pressure decorative laminate (HPDL) sheets which consist of papers, fabrics, or other core materials that have been laminated at pressures of more than 5.0 MPa using thermosetting condensation resins as binders.

High Pressure Decorative Laminates

DIN EN 438-4:2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第4部分:厚度为2毫米和大于2毫米的压实层压制件的分类和规范

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater; German version EN 438-4:2005

DIN EN 438-3:2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第3部分:用于粘结支撑基质的不足2毫米厚的层压制件的分类和规范

This Part of EN 438 applies to laminates less than 2 mm thick normally intended for bonding to supporting substrates to produce HPL composite panels and establishes a classification system for high-pressure decorative laminates according to their performance and main recommended fields of application, including materials with special characteristics, for example formability or defined reaction to fire. This Part of EN 438 also specifies requirements for the properties of the various types of laminates covered by this classification system. High-pressure decorative laminates are characterised by their qualities, durability and functional performance. HPL sheets are available in a wide variety of colours, patterns and surface finishes; they are resistant to wear, scratching, impact, moisture, heat and staining; and possess good hygienic and anti-static properties, being easy to clean and maintain. EN 438-2 specifies the methods of test relevant to this Part of EN 438. Parts 4,5, etc. of EN 438 are reserved for special types of HPL materials.#,,#

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates; German version EN 438-

DIN EN 438-5:2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第5部分:用于粘结支撑基质的厚度不足2毫米的楼板级层压制件的分类和规范

This Part of EN 438 applies to five classes of flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates, to produce HPL flooring elements. For laminate floor covering applications they meet the surface property requirements specified in EN 13329. High-pressure decorative flooring laminates are characterised by their high resistance to abrasion, aesthetic qualities and durability. They have good hygienic and anti-static properties and are easy to clean and maintain. The requirements in this document apply only to the high-pressure laminate, and additional properties will need to be specified in order to define the functional performance of the finished flooring product. This Part of EN 438 applies only to decorative laminates as defined in Clause 3. EN 438-2 specifies the methods of test relevant to this part of EN 438.#,,#

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates; German

DIN EN 438-6:2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第6部分:大于和等于2毫米厚的外部用压实层压制件的分类和规范

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater; German version EN 438-6:2005

DIN EN 438-7:2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第7部分:内墙、外墙和天棚用压实层压制件和HPL复合板材

This document specifies the health, safety and energy saving requirements for: ?Compact laminate panels/sidings for interior wall and ceiling finishes (including suspended ceilings); ?HPL composite panels/sidings for interior wall and ceiling finishes (including suspended ceilings); ?Compact laminate panels/sidings for exterior wall and ceiling finishes (including suspended ceilings); ?HPL composite panels/sidings for exterior wall and ceiling finishes (including suspended ceilings). It also specifies methods for the evaluation of conformity of the product to the requirements, and includes requirements for marking. It covers only the HPL panels for non-structural applications, and does not cover fixing systems. The products are intended for use as wall and ceiling finishes for internal and external applications according to the manufacturer's specifications. The scope of this document does not cover: a) overlaid or veneered wood-based panels where the overlay/veneer is not HPL; b) HPL-surfaced wood-based panels intended for use as structural components. These products are covered by EN 13986 (wood-based panels for use in construction). This document covers only characteristics related to health, safety and energy-saving. All other characteristics are covered in separate European Standards for HPL products (see Annex B).

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005

DIN EN 438-2:2005 装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).第2部分:性能测定

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2005

DIN EN 438-1:2005 装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).第1部分:说明和一般信息

This Part of EN 438 gives an overview of the standard, and provides guidance in the selection and application of test methods and specifications contained in Parts 2 to 7 of EN 438.#,,#

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information; German version EN 438-1:2005

DS/EN 438-3:2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第3部分：用于粘合支撑基材的厚度小于 2 毫米的层压板的分类和规范

This Part of EN 438 applies to laminates less than 2 mm thick normally intended for bonding to supporting substrates to produce HPL composite panels and establishes a classification system for high-pressure decorative laminates according to their performance and main recommended fields of application, including materials with special characteristics, for example formability or defined reaction to fire. This Part of EN 438 also specifies requirements for the properties of the various types of laminates covered by this classification system.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates

DS/EN 438-7:2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第7部分：用于内外墙和天花板饰面的致密层压板和 HPL 复合板

This document specifies the health, safety and energy saving requirements for:• Compact laminate panels/sidings for interior wall and ceiling finishes (including suspended ceilings);• HPL composite panels/sidings for interior wall and ceiling finishes (including suspended ceilings);• Compact laminate panels/sidings for exterior wall and ceiling finishes (including suspended ceilings);• HPL composite panels/sidings for exterior wall and ceiling finishes (including suspended ceilings).It also specifies methods for the evaluation of conformity of the product to the requirements, and includes requirements for marking. It covers only the HPL panels for non-struc

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes

DS/EN 438-6:2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第6部分：厚度为 2 毫米及以上的外部级紧凑层压板的分类和规范

This Part of EN 438 applies to Exterior-grade Compact laminates of thickness 2mm and greater. Itspecifies requirements for standard and flame-retardant laminates intended for use under outdoorweather conditions such as direct sunlight rain and frost. Two levels of performance are specified; one for moderate exterior conditions, and the other for severe exterior conditions. Laminates complying with this Part of EN 438 are referred to as Exterior-grade Compact laminates, and are characterized by their high tensile strength, high impact resistance, thermal shock resistance, and resistance to weather and corrosion. They are available in a variety of decorative

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater

DS/EN 438-5:2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第5部分：用于粘合支撑基材的厚度小于 2 毫米的地板级层压板的分类和规范

This Part of EN 438 applies to five classes of flooring grade laminates less than 2 mm thick intendedfor bonding to supporting substrates, to produce HPL flooring elements. For laminate floor coveringapplications they meet the surface property requirements specified in EN 13329.High-pressure decorative flooring laminates are characterised by their high resistance to abrasion,aesthetic qualities and durability. They have good hygienic and anti-static properties and are easy toclean and maintain.The requirements in this document apply only to the high-pressure laminate, and additional propertieswill need to be specified in order to define the functional perfo

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates

DS/EN 438-4:2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第4部分：厚度为 2 毫米及以上的紧凑型层压板的分类和规范

This Part of EN 438 specifies performance requirements for two types of Compact laminate (definedin Clause 4) of thickness 2 mm or greater intended for interior use.High-pressure decorative Compact laminates are characterised by their aesthetic qualities, strength,durability and functional performance. Compact HPL sheets are available in a wide variety of colours,patterns and surface finishes; they are extremely strong, and resistant to wear, impact, scratching,moisture, heat and staining; and possess good hygienic and anti-static properties, being easy to cleanand maintain.EN 438-2 specifies the methods of test relevant to this part of EN 438.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater

DS/EN 438-2:2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第2部分：性能的测定

This part of EN 438 specifies the methods of test for determination of the properties of high-pressuredecorative laminates as defined in Clause 3. These methods are primarily intended for testing the sheetsspecified in EN 438-3, 4, 5 and 6.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties

DS/EN 438-1:2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第1部分：简介和一般信息

This Part of EN 438 gives an overview of the standard, and provides guidance in the selection andapplication of test methods and specifications contained in Parts 2 to 7 of EN 438.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information

LST EN 438-2-2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第2部分：性能的测定

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties

LST EN 438-6-2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第6部分：厚度为 2 毫米及以上的外部级紧凑型层压板的分类和规范

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater

LST EN 438-5-2005 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第5部分：用于粘合支撑基材的厚度小于 2 毫米的地板级层压板的分类和规范

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates