83.140.20 层压薄板 标准查询与下载

BS ISO 4586-7:2018 高压装饰层压板（HPL，HPDL） 基于热固性树脂的片材（通常称为层压板） 设计层压板的分类和规范

High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for design laminates

BS ISO 4586-2:2018 高压装饰层压板（HPL，HPDL） 基于热固性树脂的片材（通常称为层压板） 性能的确定

High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Determination of properties

BS ISO 4586-6:2018 高压装饰层压板（HPL，HPDL） 基于热固性树脂的片材（通常称为层压板） 厚度为2mm及以上的外部级致密层压板的分类和规范

High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater

BS ISO 4586-5:2018 高压装饰层压板（HPL，HPDL） 基于热固性树脂的片材（通常称为层压板） 厚度小于2mm的地板级层压板的分类和规范，用于粘合到支撑基底上

High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates

BS ISO 4586-1:2018 高压装饰层压板（HPL，HPDL） 基于热固性树脂的片材（通常称为层压板） 简介和一般信息

High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Introduction and general information

BS ISO 4586-4:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第4部分: 厚度大于等于2mm的紧凑型层压板分类和规格

High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for compact laminates of thickness 2 mm and greater

ISO 4586-7:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第7部分: 设计层压板的分类和规格

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Classification and specifications for design laminates

ISO 4586-6:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第6部分: 厚度大于等于2 mm的外用级紧凑型层压板分类和规格

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater

ISO 4586-5:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第5部分: 拟用于粘接承重基材的厚度不足2 mm的地板级层压板分类和规格

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates

ISO 4586-3:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第3部分: 拟用于粘接承重基材的厚度不足2 mm的层压板分类和规格

This document applies to high-pressure laminates (HPL) less than 2 mm thick normally intended for bonding to supporting substrates to produce HPL composite panels and establishes a classification system for high-pressure decorative laminates according to their performance and main recommended fields of application, including materials with special characteristics, for example formability or defined reaction to fire. This document also specifies requirements for the properties of the various types of laminates covered by this classification system. reserved for other types of HPL materials.

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates

ISO 4586-4:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第4部分: 厚度大于等于2 mm的紧凑型层压板分类和规格

This document specifies performance requirements for compact laminate (defined in Clause 4) of thickness 2 mm or greater intended for interior use.

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater

ISO 4586-1:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第1部分: 介绍和通用要求

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information

ISO 4586-2:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第2部分: 性能测定

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties

ISO 4586-8:2018 高压装饰性层压板 (HPL, HPDL). 基于热固树胶的薄板材 (通常称为层压板). 第8部分: 可替代芯层压板的分类和规格

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for alternative core laminates

ASTM D4762-18 聚合物基复合材料试验的标准指南

1.1 This guide summarizes the application of ASTM standard test methods (and other supporting standards) to continuous-fiber reinforced polymer matrix composite materials. The most commonly used or most applicable ASTM standards are included, emphasizing use of standards of Committee D30 on Composite Materials. 1.2 This guide does not cover all possible standards that could apply to polymer matrix composites and restricts discussion to the documented scope. Commonly used but nonstandard industry extensions of test method scopes, such as application of static test methods to fatigue testing, are not discussed. A more complete summary of general composite testing standards, including non-ASTM test methods, is included in the Composite Materials Handbook (CMH-17).2 Additional specific recommendations for testing textile (fabric, braided) composites are contained in Guide D6856. 1.3 This guide does not specify a system of measurement; the systems specified within each of the referenced standards shall apply as appropriate. Note that the referenced standards of ASTM Committee D30 are either SI-only or combined-unit standards with SI units listed first. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Testing Polymer Matrix Composite Materials

EN 438-9:2017 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第9部分:代替核心层板的分类和规格

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates

DIN EN 438-2/A1:2017 高压装饰层压板(HPL). 热固性树脂基板材(通常称为层压板). 第2部分：性质的确定；德文和英文版本EN 438-2:2016/prA1:2017

This European Standard specifies the methods of test for determination of the properties of high-pressure decorative laminates as defined in Clause 3. These methods are primarily intended for testing the sheets specified in EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-8, and EN 438-9.The precision of the test methods, specified in this European Standard, is not known because inter-laboratory data are not yet available. When inter-laboratory data will be obtained, precision statements will be added to the test method at the following revision. For those test methods having an end point determination based on subjective judgement, it is not meaningful to make a statement of precision.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German and English version EN 438-2:2016/prA1:2017

DIN EN 438-8:2017 高压装饰层压板(HPL). 热固性树脂基板材(通常称为层压板). 第8部分：设计层压板的分类和规范：德文和英文版本prEN 438-8:2017

This part of EN 438 specifies performance requirements for design laminates laminates intended for interior use with a design effect surface having a phenolic based core and a decorative surface, not covered by EN 438-3 to EN 438-6. Three surface layer types (metal, wood veneer and pearlescent decor) are defined in this part of EN 438.EN 438-2 specifies the test methods relevant to this part of EN 438.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for design laminates; German and English version prEN 438-8:2017

ASTM D8066/D8066M-17 聚合物基复合材料层压板的标准实践无缝压缩试验

1.1 This practice provides instructions for using the Test Method D6484 open hole compression test fixture to determine unnotched compressive strength of multi-directional laminates. The composite material forms are limited to continuous-fiber reinforced polymer matrix composites in which the laminate is both symmetric and balanced with respect to the test direction. The range of acceptable test laminates and thicknesses are described in 8.2.1. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Within the text the inch-pound units are shown in brackets. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates

ASTM D8131/D8131M-17e1 聚合物基复合层压板锥形和阶梯接头的拉伸性能标准实践

1.1 This test practice defines the procedure for determination of the tensile strength of a tapered or stepped joint of polymer matrix composite materials. It is applicable to secondary bonded or co-bonded laminates with either unidirectional plies or woven fabric reinforcements. The materials to be bonded may be different material systems. In the bondline, a separate adhesive material may or may not be used (example: adhesives may be used with a prepreg system or may not be used with a wet lay-up repair system). The range of acceptable test laminates and thicknesses is described in 8.2.1. 1.2 This practice supplements Test Method D3039/D3039M for tensile loading. Several important test specimen parameters (for example, joint length, ply overlaps, step depth, and taper ratio) are not mandated by this practice, however, these parameters are required to be specified and reported to support repeatable results. 1.3 Unidirectional (0° ply orientation) tape composites, textile composites, as well as multidirectional composite laminates, can be tested. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. 1.4.1 Within the text the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates