83.140.20 层压薄板 标准查询与下载

DS/EN ISO 19712-1:2013 塑料 装饰性固体表面材料 第1部分：分类和规范

ISO 19712-1:2008 establishes a classification system for solid surfacing materials according to their performance.ISO 19712-1:2008 also specifies property requirements for the various types of solid surfacing materials covered by this classification. Requ

Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications

DS/EN ISO 19712-2:2013 塑料 装饰性固体表面材料 第2部分：性能的测定 板材

ISO 19712-2:2007 specifies the methods of test for determination of the properties of solid surfacing materials in the form of sheets. These methods are primarily intended for testing the materials specified in ISO 19712-1.

Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods

EN ISO 19712-3:2013 塑料.装饰性固体表面材料.第3部分:性能测定.固体表面形状

Der vorliegende Teil der ISO 19712 legt Prufverfahren zur Bestimmung der Eigenschaften von verschiedenen Formteilen aus Mineralwerkstoffen fest, die in Abschnitt 3 definiert sind. Diese Verfahren sind hauptsachlich zur Prufung der in ISO 19712-1 festgelegten Werkstoffe vorgesehen. Die Prufungen konnen an fertigen Erzeugnissen durchgefuhrt werden, werden jedoch im Allgemeinen an Prufplatten vorgenommen, deren Grose ausreichend ist, um die Prufanforderungen zu erfullen und die aus dem gleichen Material bestehen und die gleiche Oberflachenbeschaffenheit aufweisen, wie die fertigen Erzeugnisse.

Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes

EN ISO 19712-1:2013 塑料.固体表面的装饰材料.第1部分:分类和规范

Dieser Teil von ISO 19712 legt ein Klassifizierungssystem fur Mineralwerkstoffe entsprechend deren Leistungsfahigkeit fest. Dieser Teil von ISO 19712 legt auch Anforderungen an die Eigenschaften fur die verschiedenen Arten von Mineralwerkstoffen fest, fur die diese Klassifizierung gilt. Anforderungen werden fur die Arten festgelegt, die gewohnlich am haufigsten verwendet werden, jedoch konnen erforderlichenfalls weitere Arten zugefugt werden. Die festgelegten Grenzwerte gelten fur die ublicherweise am haufigsten verwendeten Werkstoffarten, jedoch kann es innerhalb jeder Klassifikation moglich sein, Varianten zu erhalten, die viel hohere Leistungswerte aufweisen. Diese Werkstoffe sind durch ihr homogenes Erscheinungsbild, die Erneuerbarkeit der Oberflachen und unauffallige Nahte gekennzeichnet. Allgemein werden sie wie folgt klassifiziert. a) Mineralwerkstoffplatten Mineralwerkstoffplatten sind fur horizontale, vertikale, feuchte und trockene Anwendungen ausgelegt. b) Mineralwerkstoffformteile Mineralwerkstoffformteile umfassen, sind jedoch nicht beschrankt auf, Kuchenspulen, Waschbecken, Waschtische (Ablagen), Duschen, Badewannen und Whirlpools. Die wichtigsten Eigenschaften von Mineralwerkstoffen sind: Wasserbestandigkeit, Temperaturwechselbestandigkeit, Warmebestandigkeit, Bestandigkeit gegenuber Stosbeanspruchung (Stosfestigkeit), Fleckenunempfindlichkeit und Bestandigkeit gegenuber Chemikalien, Bestandigkeit gegenuber Zigarettenglut, Farbbestandigkeit, Harte, Bestandigkeit gegen Bakterien und Pilze, Reinigbarkeit, Hygiene, nahtlose Verarbeitbarkeit, Erneuerbarkeit.

Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications

ANSI/UL 746Ec-2013 聚合物材料安全性标准.工业层压薄板、纤维缠绕管材、硫化纤维和印刷电路板用材料

Standard For Safety For Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used In Printed-Wiring Boards

ANSI/UL 746Eb-2013 聚合物材料安全性标准.工业层压薄板、纤维缠绕管材、硫化纤维和印刷电路板用材料

Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed-Wiring Boards

EN ISO 19712-2:2013 塑料.实心表面处理用装饰材料.第2部分:性能的测定.薄板材

Der vorliegende Teil der ISO 19712 legt Prufverfahren zur Bestimmung der Eigenschaften von verschiedenen Mineralwerkstoffen in Plattenform fest, die in Abschnitt 3 definiert sind. Diese Verfahren sind hauptsachlich zur Prufung der in ISO 19712-1 festgelegten Werkstoffe vorgesehen. Die Prufungen konnen an fertigen Platten durchgefuhrt werden, werden jedoch im Allgemeinen an Probekorpern vorgenommen, die gros genug sind, um die Prufanforderungen zu erfullen und die aus dem gleichen Material bestehen und die gleiche Oberflachenbeschaffenheit aufweisen, wie die fertigen Platten.

Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods

ANSI/UL 746Ea-2013 聚合物材料安全性标准.工业层压薄板、纤维缠绕管材、硫化纤维和印刷电路板用材料

Standard for Safety for Polymeric Materials; Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed-Wiring Boards

ANSI/ASTM D709:2013 层压热固性材料规范

Specification for Laminated Thermosetting Materials

ANSI/UL 746E-2013 聚合物材料安全性标准.工业层压薄板、纤维缠绕管材、硫化纤维和印刷电路板用材料

Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed-Wiring Boards

KS M ISO 4586-1-2012(2017) 高压装饰层压板热固性树脂板第1部分:分类和规范

High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications

KS M ISO 4586-1-2012(2022) 高压装饰层压板热固性树脂薄板第1部分:分类和规范

High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications

KS M ISO 4586-1:2012 装饰用高压叠层板材(HPL).热固性树脂制薄板.第1部分:分类和规范

이 표준은 예를 들면 후성형성 또는 제한된 방화성 등의 특성을 나타내는 재료를 포함하는 고

High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications

DB44/T 891-2011 吸塑用复合聚氯乙烯装饰片材

本标准规定了吸塑用复合聚氯乙烯装饰片材（简称装饰片材）的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以聚氯乙烯树脂为主要原料，加入助剂经压延法制成硬质或半硬质半成品，由印刷、复合、压花等工艺制成复合聚氯乙烯片材，该产品用于采用吸塑成型的表面装饰。

Composite polyvinyl chloride decorative sheet for blister

ASTM D4762-11 聚合物基复合材料试验的标准指南

This guide is intended to aid in the selection of standards for polymer matrix composite materials. It specifically summarizes the application of standards from ASTM Committee D30 on Composite Materials that apply to continuous-fiber reinforced polymer matrix composite materials. For reference and comparison, many commonly used or applicable ASTM standards from other ASTM Committees are also included.1.1 This guide summarizes the application of ASTM standard test methods (and other supporting standards) to continuous-fiber reinforced polymer matrix composite materials. The most commonly used or most applicable ASTM standards are included, emphasizing use of standards of Committee D30 on Composite Materials. 1.2 This guide does not cover all possible standards that could apply to polymer matrix composites and restricts discussion to the documented scope. Commonly used but non-standard industry extensions of test method scopes, such as application of static test methods to fatigue testing, are not discussed. A more complete summary of general composite testing standards, including non-ASTM test methods, is included in the Composite Materials Handbook (MIL-HDBK-17). Additional specific recommendations for testing textile (fabric, braided) composites are contained in Guide D6856. 1.3 This guide does not specify a system of measurement; the systems specified within each of the referenced standards shall apply as appropriate. Note that the referenced standards of ASTM Committee D30 are either SI-only or combined-unit standards with SI units listed first. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Testing Polymer Matrix Composite Materials

ASTM D3917-11 热固性玻璃增强塑料拉挤形状尺寸公差的标准规范

1.1 This specification defines tolerances applicable to standard rods, bars, and shapes pultruded from thermosetting glass-reinforced plastics. 1.2 These dimensional tolerances apply to all shapes specified as “standard” by the pultrusion industry. 1.3 Custom shapes and products designed for special applications may carry specific tolerances that vary from the standard. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following safety hazards caveat pertains only to the test methods portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;There is no known ISO equivalent to this standard.

Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes

LST EN 438-9-2010 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第9部分：替代芯层压板的分类和规范

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates

DS/EN 438-9:2010 高压装饰层压板（HPL） 基于热固性树脂的板材（通常称为层压板） 第9部分：替代芯层压板的分类和规范

This European Standard specifies performance requirements for high-pressure decorative laminates (HPL) intended for interior use, the core compositions of which are not covered by EN 438-3 [1] to EN 438-6 [4] and EN 438-8 [5]. The core composition types (coloured core and metal reinforced core) are defined in this part of EN 438.EN 438-2 specifies the test methods relevant to this part of EN 438.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates

DIN EN 438-9:2010 高压装饰性层压板.基于热固树胶的薄板材(通常称为层压板).第9部分:可替换芯层用分类和规范.德文版本EN 438-9-2010

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates; German version EN 438-9:2010

BS EN 438-9:2010 高压装饰性层压板(HPL).基于热固树胶的薄板材(通常称为层压板).可替换芯层的分类和规范

This European Standard specifies performance requirements for high-pressure decorative laminates (HPL) intended for interior use, the core compositions of which are not covered by EN 438-3 [1] to EN 438-6 [4] and EN 438-8 [5]. The core composition types (coloured core and metal reinforced core) are defined in this part of EN 438. EN 438-2 specifies the test methods relevant to this part of EN 438.

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for alternative core laminates