83.140.30 塑料管、配件和阀门 标准查询与下载

KS M ISO 8085-3-2016(2021) 供应气体燃料用聚乙烯管用聚乙烯配件－米制系列－规范－第3部分:电熔配件

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels－Metric series－Specifications－Part 3：Electrofusion fittings

KS M ISO 8085-2-2016 供应气体燃料用聚乙烯管接头用聚乙烯配件米制系列规范第2部分:对焊熔合、加热工具承插熔合和电熔合接头用插口配件

Polyethylene fittings for use with polyethylene pies for the supply of gaseous fuels－Metric series－Specifications－Part 2：Spigot fittings for butt fusion, for socket fusion using heated tools and for u

DB42/T 1127-2015 零添加剂超高分子量聚乙烯管材

Zero Additive UHMWPE Pipe

GSO ISO 16486-6:2015 用于气体燃料供应的塑料管道系统 带熔接和机械连接的聚酰胺非塑料 (PA-U) 管道系统 第6部分：设计、操作和安装实施规范

This part of ISO 16486 specifies a code of practice dealing with unplasticized polyamide (PA-U) piping systems, intended to be buried outside buildings and used for the supply of gaseous fuels. It addresses the common basic principles for gas supply systems. More detailed national standards or codes of practice might exist in the ISO member countries. This part of ISO 16486 is intended to be applied in association with those national standards or codes of practice related to the above-mentioned basic principles. It is applicable to mains and service lines, the components of which are prepared for jointing by scraping and/or machining, and gives instructions for the design, storage, handling, transportation, laying conditions and fusion quality control of PA-U pipes and fittings up to and including 250 mm outside diameter, as well as subsequent joint testing, backfilling, pipe system testing, commissioning and decommissioning. The jointing methods covered by this part of ISO 16486 are butt fusion jointing and electrofusion jointing. No special precautions are necessary for areas exposed to the influence of mining and earthquakes other than those precautions mentioned in this part of ISO 16486. It is the responsibility of users of this part of ISO 16486 to take existing and new national regulations into account.

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 6: Code of practice for design, handling and installation

T/ZZB 014-2015 民用 PP-R 塑料管材

本标准规定了以无规共聚聚丙烯（PP-R）混配料为原料，经挤出成型的圆形横截面的无规共聚聚丙烯管材（以下简称管材）的定义、符号和缩略语、材料、产品分类、管系列S值的选择、基本要求、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于民用建筑内冷热水管道系统，包括饮用水和采暖系统等。 本标准不适用于消防系统。

Civilian polypropylene random copolymer（PP-R）plastic pipes

DB35/T 1501-2015 埋地排水用聚丙烯（PP）缠绕结构壁管材

本标准规定了埋地排水用聚丙烯缠绕结构壁管材(包括管件)的术语和定义、符号和缩略语、材料、管材的分类和标记、结构型式和连接方式、要求、试验方法、检验规则和标志、运输、贮存。 本标准适用于以聚丙烯（PP）为主要原料，以相同或不同塑料材料作为辅助支撑结构，采用热缠绕 成型工艺，经加工制成的结构壁管材、管件。该产品适用于长期温度在60℃以下的埋地排水工程。在考虑了材料耐化学性的条件下，也可用于工业排水工程。

Polypropylene (PP) wound structural wall pipes for buried drainage

DB13/T 2164-2014 埋地高强度聚录乙烯（PVS-S）给水管道工程技术规程

Technical regulations for buried high-strength polyvinyl record (PVS-S) water supply pipeline engineering

DB13/T 2162-2014 大口径聚乙烯（PE）给水管道工程技术规程

Large-diameter polyethylene (PE) water supply pipeline engineering technical regulations

DB13/T 2027-2014 大口径聚乙烯（PE）给水管材

Large diameter polyethylene (PE) water supply pipe

DB35/T 1441-2014 建筑排水用硬聚氯乙烯（PVC-U） 漩流降噪管件

本标准规定了建筑排水用硬聚氯乙烯（PVC-U）漩流降噪管件的产品分类、材料要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以聚氯乙烯(PVC)树脂为主要原料，加入适宜的助剂，经注塑成型、组装并胶粘剂连接（下称胶粘连接）或丝扣柔性连接（下称柔性连接）而成的建筑排水用硬聚氯乙烯（PVC-U）漩流降噪管件（以下简称管件）。该产品作为民用建筑物排水用管件；在满足使用性能的条件下，也可作为工业排水用管件。

Rigid polyvinyl chloride (PVC-U) swirl noise reduction pipe fittings for building drainage

DB33/T 922-2014 塑料管道壁厚超声波检验方法

Ultrasonic testing method for wall thickness of plastic pipes

JT/T 899-2014 公路用钢塑复合光电缆保护管

本标准规定了公路用钢塑复合光电缆保护管(简称钢塑管)的产品结构与分类、技术要求、试验方法、检验规则以及标志、包装、运输和储存。本标准适用于公路(含高速公路)光电缆保护用钢塑管,其他场所参照使用。

Plastic-steel-plastic composite pipe for protecting communication cable for highway

DB44/T 1294-2014 纤维增强塑料混凝土复合管

本标准规定了纤维增强塑料混凝土复合管(以下简称FRPCP管)的术语、定义、分类、原材料、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以玻璃纤维增强塑料管为内衬层，钢筋混凝土为结构层的新型纤维增强塑料混凝土复合管。

Fiber Reinforced Plastic Concrete Composite Pipe

DB44/T 1293-2014 中空壁塑钢缠绕聚乙烯管道

本标准规定了中空壁塑钢缠绕聚乙烯管道的术语和定义、分类、原材料要求、技术要求、试验方法、检验规则、标志、贮存和运输。 本标准规定的中空壁塑钢缠绕聚乙烯管道适用于长期输送介质温度在45℃以下的无压埋地城镇雨、污水排水、工业废水排水以及农田排灌等工程用管道。

Hollow wall plastic steel winding polyethylene pipe

DIN CEN/TS 14541:2013 非压力设备用塑料管道和配件.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)材料的应用特性.德文版本CEN/TS 14541-2013

Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2013

PD CEN/TS 14541:2013 塑料管材和管件 使用非原生 PVC-U、PP 和 PE 材料的特性

This Technical Specification specifies definitions and recommended characteristics and test methods for the utilisation of PVC-U, PP and PE non-virgin materials in pipes, fittings and ancillaries for both pressure and non-pressure piping systems. This Technical Specification specifies the conditions for utilisation of non-virgin material with and without agreed specification. Non-virgin materials may be reformulated by the use of additives and processing techniques to meet an agreed specification. Typically the additives used would be stabilisers and pigments etc. The WG responsible for the product standard should consider the content of this document and only permit dosage levels which give compliance with the requirements of the product standard. Further, the WG should consider whether extra or more frequent product testing is relevant when using such material in the production of pipes and fittings in accordance with the relevant product standard. NOTE For the purpose of this specification the term pipes means extruded pipes, gutters and any parts of a fabricated fitting which is made from an extruded pipe. The term fitting means injection- and rotomoulded fittings and injection moulded parts of a fabricated fitting. For the recycling process, the testing and the use of the non-virgin material National and/or European regulations may apply.

Plastics pipes and fittings - Characteristics for utilisation of nonvirgin PVC-U, PP and PE materials

TIS 982-2013 饮用水用聚乙烯管

Polyethylene pipes for drinking water

HG/T 4304-2012 耐蚀聚烯烃（PO）塑料衬里技术条件

本标准规定了耐蚀聚烯烃(Polyolefine,以下简称PO)塑料衬里钢制管道与设备的术语和定义,分类及适用条件,技术要求,试验方法及检验规则和标志、包装、运输、贮存等要求。本标准适用于公称压力PN - 0.098 MPa~1.6 MPa,使用温度-20℃~100℃,公称通径DN25 mm~DN8 000 mm的PO滚塑衬里的钢制(以下简称C. S)管道与设备。

Anti-Corrosion technical conditions for equipments lined with polyolefine(PO)

DB35/T 1302-2012 建筑排水用硬聚氯乙烯（PVC-U）内螺旋管材

本标准规定了建筑排水用硬聚氯乙烯（PVC-U）内螺旋管材的材料、分类和标记、结构型式、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以聚氯乙烯(PVC)树脂为主要原料，添加必要的助剂，经挤出成型的硬聚氯乙烯(PVC-U)内螺旋管材（以下简称为“管材”）。 本产品适用于建筑物排水立管用。

Rigid polyvinyl chloride (PVC-U) inner spiral pipe for building drainage

KS M 3416-2012 冷热水装置用塑料管道系统 耐高温聚乙烯（PE-RT）管道

Plastics piping systems for hot and cold water installations－Polyethylene of raised temperature resistance(PE-RT) pipes