共找到 536 条与 塑料管、配件和阀门 相关的标准,共 36 页
本标准适用于自来水及一般液体输送用(以下简称为耐冲击PVC管)。
Unplasticized high impact polyvinyl chloride pipes
本标准规定了以聚氯乙烯树脂为主要原料,经挤出成型的硬聚氯乙烯双壁波纹管材(以下简称“管材”)的定义、符号、材料、产品分类、要求、试验方法、检验规则和标志、运输、贮存。 本标准适用于市政建筑小区排水、建筑物外排水、农田排水用管材,也可用于通讯电缆穿线和低压输水灌溉(≤0.2MPa)等管材。考虑到材料的耐化学性和耐温性后亦可用于工业排污管道。
Unplasticized polyvinyl chloride (PVC-U) double wall corrugated pipes
本标准规定了超高分子量聚乙烯(UHMWPE)管材的产品分类、原料、产品规格、要求、试验方法、检验规则和标志、包装、运输、贮存。 标准适用于以超高分子量聚乙烯为主要原料,其他组分添加量不大于5%的经挤出成型的管材(以下简称管材)。本标准规定的管材适用于输送水、浆体、粉体、颗粒状固体、45℃以下某些腐蚀性化学液体以及低温下的流体。
Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes
本部分规定了以聚氯乙烯为主要原料,经挤出成型的埋地通信用多孔一体塑料管材一-硬聚氯乙烯多孔一体管材的产品分类、要求、试验方法、检验规则和标志、运输、贮存。 本部分适用于室外埋地通信电缆和光缆的管道系统。
Buried multi-hole plastics pipes for communication Part 1: Unplasticsized polyvinyl chloride (PVC-U) multi-hole pipes
部分规定了以聚乙烯树脂为主要原料,经挤出成型的埋地通信用多孔一体塑料管材——聚乙烯多孔一体管材(以下简称"管材" )的产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 部分适用于室外埋地通信电缆和光缆的管道系统。
Buried multi-hole plastics pipes for communication Part 1: Polyethylene (PE) multi-hole pipes
本标准适用于氯化聚氯乙烯管接头配件
Chlorinated poly(vinyl chloride) (CPVC) plastic fittings
Plastics traps for discharge pipework systems inside buildings
Thermoplastics pipes and fittings for hot and cold water systems
本标准规定了以廢舊塑料为主料,加和必要的輔料,擠出成型的建築用再生塑料排水管材(以下筒 称管材)的产品分类、技术要求、试验方法.检验规则,标志、使用说明书.包装,贮存和运输。 本标准适用于民用建筑内排水用管材。
Regenerate plastics pipes for drainage in buildings
Method of test for plastics pipes and fittings - Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
Methods of test for plastics pipes and fittings - Determination of toluene extract of carbon black
Methods of test for plastics pipes and fittings - Determination of weathering resistance of plastics pipes for external storage
Methods of test for plastics pipes and fittings - Determination of resistance to crack propagation - Test methods for slow crack growth in notched pipes (notch test)
This Prestandard specifies the requirements for pipes, fittings and the system of polypropylene (PP) solid-wall piping systems intended to be used for general ducting.#,,#
Pipes and fittings of polypropylene (PP) for buried ducting - Dimensions and technical delivery conditions
本标准适用于聚丙烯制造的圆形无缝管(简称PP管),不适用于饮用水。
Polypropylene (PP) pipes
本标准适用于冷热水及一般流体输送用之氯化聚氯乙烯管,以下简称 CPVC 管。备考 1. 本标准适用于 Sch 40、Sch 80、SDR-11, 13.5 及 B(W)(请参照附录 1)规格之管。2. 本标准中{ } 内之单位及数值系英制。
Chlorinated poly (vinyl chloride) plastic pipe
Methods of test for plastics pipes and fittings - Method of determining reversion of UPVC pipes
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号