83.140.99 其他橡胶和塑料制品 标准查询与下载

T/SHXCL 0018-2023 低碳可循环聚丙烯中空箱

本文件规定了低碳可循环聚丙烯中空箱（以下简称中空箱）的要求、试验方法、检验规则及标志、包装、运输、贮存。

Recyclable polypropylene plate boxes with low carbon footprint

T/GLYH 002-2023 增强反应型止水带

本文件提出的增强反应型止水带创新了止水机理，提高了防窜水性，增强了止水效果，提高了地下结构安全性，降低工程维护成本。为进一步扩大增强反应型止水带推广应用、规范生产工艺和过程控制，促进产品标准化、系列化和产业化，特制定本文件。 增强反应型止水带提高了变形缝止水带的拉伸性能，增强了止水带适应混凝土接缝伸缩变形的能力。基于胶粘密封及防排结合的止水机理，从阻断渗水通道角度出发，对止水带结构进行优化设计。在现有橡胶、钢边橡胶、钢板基材上，增设止水功能区并在其上复合反应层，通过反应层将止水带与混凝土间渗水通道粘接密封，改善止水效果。

Reinforced Reactive waterstop

BS ISO 20819-2:2023 塑料 木塑再生复合材料（WPRC）-测试方法

1   Scope This document defines the test methods for fundamental physical properties and durability required for wood-plastic recycled composites (hereinafter called WPRC ) stipulated in ISO 20819‑1.

Plastics. Wood-plastic recycled composites (WPRC) - Test methods

T/CIPR 093-2023 无人机起落架收纳箱

本文件规定了无人机起落架收纳箱（简称：收纳箱）的结构型式、分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本文件适用于无人机起落架使用的无人机起落架收纳箱的制造。

Drone landing gear storage box

T/WZCH 006-2023 固体化学肥料用塑料编织袋

5基本要求 5.1设计研发 5.2材料 5.3工艺与装备 5.4检验检测 6技术要求 6.1外观质量 6.2允许偏差 6.3缝制要求 6.4物理性能 6.5　复合编织外袋耐热性能 6.6　跌落性能 6.7　复合编织外袋抗紫外线性能

Plastic woven sack for solid chemical fertilizer

ISO 20819-2:2023 塑料.木塑再生复合材料（WPRC）.第2部分：试验方法

This document defines the test methods for fundamental physical properties and durability required for wood-plastic recycled composites (hereinafter called WPRC) stipulated in ISO 20819-1.

Plastics — Wood-plastic recycled composites (WPRC) — Part 2: Test methods

ASTM D7258-23 聚合物桩标准规范

1.1 This specification addresses the use of round and rectangular cross-section polymeric piles in axial and lateral load-bearing applications, including but not limited to marine, waterfront, and corrosive environments. 1.2 This specification is only applicable to individual polymeric pile products. Sheet pile and other mechanically connected polymeric pile products using inter-locking systems, are not part of this specification. 1.3 The piling products considered herein are characterized by the use of polymers, whereby (1) the pile strength or stiffness requires the inclusion of the polymer, or (2) a minimum of fifty percent (50 %) of the weight or volume is derived from the polymer. The type classifications of polymeric piles described in Section 4 show how they can be reinforced by composite design for increased stiffness or strength. 1.4 This specification covers polymeric piles fabricated from materials that are virgin, recycled, or both, as long as the finished product meets all of the criteria specified herein. Diverse types and combinations of inorganic filler systems are permitted in the manufacturing of polymeric piling products. Inorganic fillers include such materials as talc, mica, silica, wollastonite, calcium carbonate, etc. Pilings are often placed in service where they will be subjected to continuous damp or wet exposure conditions. Due to concerns of water sensitivity and possible affects on mechanical properties in such service conditions, organic fillers, including lignocellulosic materials such as those made or derived from wood, wood flour, flax shive, rice hulls, wheat straw, and combinations thereof, are not permitted in the manufacturing of polymeric piling products. 1.5 The values are stated in inch-pound units as these are currently the most common units used by the construction industry. 1.6 Polymeric piles under this specification are designed using design stresses determined in accordance with Test Methods D6108, D6109, and D6112 and procedures contained within this specification unless otherwise specified. 1.7 Although in some instances it will be an important component of the pile design, frictional properties are currently beyond the scope of this document. 1.8 Criteria for design are included as part of this specification for polymeric piles. Certain Types and sizes of polymeric piles will be better suited for some applications than others. Polymeric piles designed and manufactured under the different Type classifications as defined within this specification will, as a whole, exhibit a wide-range of mechanical properties. For example, a 10-in. diameter Type II, chopped glass fiber reinforced high-density polyethylene (HDPE) pile will likely have an apparent stiffness much different than a 10-in. diameter Type V, glass fiber reinforced composite tube filled with concrete. Similarly, the ultimate moment capacity of these two example piles will also likely be significantly different from each other. Use of a licensed Professional Engineer is, therefore, highly recommended for designing and selecting polymeric piles in accordance with this specification. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this specification. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Polymeric Piles

KS M ISO 25518-2022 一般用途一次性橡胶手套规范

Single use rubber gloves for general applications Specification

T/ZZB 3017-2022 轨道交通浮置板用橡胶弹簧隔振器

本文件规定了轨道交通浮置板用橡胶弹簧隔振器的术语和定义、结构与型号、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存、质量承诺。 本文件适用于轨道交通浮置板用橡胶弹簧隔振器（以下简称橡胶弹簧隔振器）。

Rubber spring isolator for floating slab of rail transit

T/ZZB 3009-2022 天然乳胶枕

本文件规定了天然乳胶枕的产品分类、基本要求、技术要求、检测方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于由天然乳胶添加配合剂经发泡、硫化等工艺制备的天然乳胶含量不低于90 %的乳胶枕芯与枕套组成的天然乳胶枕（以下简称“乳胶枕”）

Natural latex pillow

T/ZXJY 001-2022 发饰 头绳

本文件规定了头绳的术语和定义、技术要求、试验方法、检验规则及标志、包装、运输和贮存。

Hair accessories—hairband

T/DGAS 033-2022 质量分级及“领跑者”评价要求 装修装饰材料 硬质聚氯乙烯低发泡型材

本文件规定了装修装饰用硬质聚氯乙烯低发泡型材质量及企业标准水平评价的评价指标体系和评价方法及等级划分。 本文件适用于装修装饰用硬质聚氯乙烯低发泡型材质量及企业标准水平评价。相关机构开展质量分级和企业标准水平评估、“领跑者”评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunner - Decoration materials — Unplasticized polyvinyl chloride low foaming profiles

T/DGAS 032-2022 质量分级及“领跑者”评价要求 装修装饰材料 硬质聚氯乙烯低发泡板材

本文件规定了装修装饰用硬质聚氯乙烯低发泡板材质量及企业标准水平评价的评价指标体系和评价方法及等级划分。 本文件适用于装修装饰用硬质聚氯乙烯低发泡板材质量及企业标准水平评价。相关机构开展质量分级和企业标准水平评估、“领跑者”评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunner - Decoration materials - Unplasticized polyvinyl chloride foam boards

ASTM F905-04(2022) 聚乙烯鞍式熔接接头的评定

1.1 This practice describes test criteria suitable for qualification of polyethylene saddle-fused joints. These tests may be conducted by suppliers or users to qualify saddle-fused joints in accordance with the requirements found in the Department of Transportation (DOT) Code of Federal Regulations (CFR) Title 49, Part 192.283. At the discretion of the end user, these tests may also be conducted by users to qualify personnel making saddle fusion joints per DOT CFR 49, Part 192.285. 1.2 The impact resistance test described is a nonstandard test. This is not the only test that may be used to qualify saddle fusion joints per DOT regulations. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversion to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Qualification of Polyethylene Saddle-Fused Joints

ASTM D7486-22 用湿分析法测量塑料颗粒上细颗粒和灰尘颗粒的标准试验方法

1.1 This test method measures the amount of fine particles adhered on plastic pellets or granules in which they are commonly produced and supplied. The lower limit of this test method is restricted only by the porosity of the filter disc used to capture the particle size being quantified. 1.2 The wet analysis technique allows for separation and collection of statically charged particles by liquid wash and filtration methods. This must be performed under standard laboratory conditions. 1.3 The values stated in SI units are to be regarded as standard. 1.4 This test method describes an essential practice to check the quality of plastics once the production cycle is terminated and to evaluate the performance of pellet cleaning systems or of the special pneumatic conveying systems for the distinct size fractions below 500 micron only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

HG/T 2821.2-2022 V带和多楔带用浸胶聚酯线绳 第2部分：软线绳

Rubberized polyester cords for V-belts and V-belts Part 2: Soft cords

HG/T 2723-2022 胶乳彩色气球

Latex colorful balloons

T/ZZB Q061-2022 环保柔性装配式侧石

本文件规定了环保柔性装配式侧石(以下简称装配式侧石)的术语和定义、分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以再生橡胶、PVC、涤纶等为主要原料制作而成的，主要用于道路边缘、园林绿化、路面界限及导水用等市政工程用的环保柔性装配式侧石。

Environmental friendly flexible assembled sidestone

T/ZAQ 10111-2022 环保柔性装配式侧石

本文件规定了环保柔性装配式侧石(以下简称装配式侧石)的术语和定义、分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Environmental friendly flexible assembled sidestone

ISO 5412:2022 塑料.工业可堆肥塑料购物袋

This document specifies the requirements, test methods, test regulations, packaging, transportation and s torage of indus trial compostable plastic shopping bags. This document is applicable to plastic shopping bags made from industrial compos table plas tic resin as the main raw material, processed by heat sealing or bonding, etc. This document does not apply to indus trial compos table plas tic bags such as indus trial compos table roll bags (also known as tear bags or point break bags made from above materials) and other bags that are only used in packaging and are not used for carrying shopping. This document enables to characterise the compos table plastic bags following two tes ting approaches that bring to the definition of two classes (class I and class II ) . NO TE I n some regions, indus trial compos ting is referred to as professional compos ting.

Plastics — Industrial compostable plastic shopping bags