83.140.99 其他橡胶和塑料制品 标准查询与下载

T/SHMHZQ 153-2021 多层复合食品包装袋技术规范

4 符号和缩略语  5 分类  6 技术要求  7 试验方法  8 检验规则  9 标志、包装、运输和贮存

Technical specification for multilayer compound food packaging bag

T/HMSW 008-2021 井盖防坠网

本标准规定了井盖防坠网的术语定义、技术要求、试验方法、检验规则及标志、包装运输、贮存、等。 本标准适用于以丙纶高强丝、膨体纱、涤纶、高强涤纶、维纶、锦纶、聚乙烯等为原料制成的用于地下井安全防护的网具。

Manhole cover anti-drop net

T/WS 0005-2021 减薄型聚丙烯编织袋

标准主要内容包括：本标准规定了减薄聚丙烯编织袋的产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存等；技术要求包括外观质量、尺寸偏差、物理性能、使用性能、卫生性能等要求。

Thinned type polypropylene woven sack

T/SHMHZQ 078-2021 化妆品塑料包装生产技术规范

4 生产条件  4.1 原辅材料  4.2 设备设施  5 生产管理  6 生产工艺  7 生产流程  7.1 生产流程图  7.2 生产通知  7.3 制程准备  7.4 开始生产

Technical specification for production of cosmetic plastic packaging

T/CSX 004-2021 塑料编织布

规格、原材料、外观质量、允许偏差、拉伸符合、耐热性能、抗紫外线性能、安全理化性能

plastic woven cloth

ASTM D1975-21 塑料注射成型开口桶耐环境应力开裂的标准试验方法

1.1 This test method provides procedures for an indication of the environmental stress crack resistance of plastic injection molded open head pails, covers, and components as a summation of the effects of container design, resin, manufacturing conditions, field performance, and other factors. 1.2 This test method may be used to evaluate a container’s resistance to mechanical failure by cracking when in the presence of chemical and physical stresses. 1.3 Two procedures are provided as follows: 1.3.1 Procedure A, Specified Stress-Crack Resistance Test Method—This procedure is particularly useful for quality control since the conditions of the test are specified. 1.3.2 Procedure B, User Selected Stress-Crack Resistance Test Method—This procedure allows individual selection of test levels and is particularly useful as a design and development tool. 1.4 These procedures are not designed to test the ability of the cover gasketing material or closure to retain the test reagent. Loss or leakage of the reagent through these openings does not constitute container failure. However, this may indicate an internal pressure loss that might affect test results. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 6.2, 10.2.3, 10.2.4, 10.2.6, and 10.2.8. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails

ISO 25518:2021 通用一次性橡胶手套.规范

This document specifies the physical requirements and sampling and testing methods for single-use rubber gloves, made from natural rubber latex, synthetic rubber latex or rubber solution, intended for general applications, but not gloves intended for medical purposes. It does not cover the safe and proper usage of the gloves.

Single-use rubber gloves for general applications — Specification

PN-EN 17508-2021-10 E 塑料—门窗制造用未增塑聚氯乙烯（PVC-U）型材—PVC基材料术语

Plastics--Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors--Terminology of PVC based materials

ASTM D1710-15(2021) 挤压聚四氟乙烯（PTFE）棒、厚壁管和基本形状的标准规范

1.1 This specification covers extruded polytetrafluoroethylene (PTFE) rod, heavy-walled tubing, and basic shapes manufactured from the PTFE resin of Specification D4894 and reprocessed PTFE resin (as defined in Guide D7209). 1.2 The specification covers all sizes of rod, tubing, and basic shapes with a wall thickness of 1.6 mm (1⁄16 in.) or greater. These materials must be made wholly from PTFE and produced in accordance with good commercial ram extrusion practices. NOTE 1—This specification and ISO/DIS 13000-1 (1997) and ISO/DIS 13000-2 (1997) differ in approach, however, data obtained using either are technically equivalent. NOTE 2—For compression molded PTFE materials, see Specification D3294. Material that can be certified to Specification D3294 may be substituted for Specification D1710, however the reverse in not true. 1.3 The values stated in SI units, as detailed in IEEE/ASTM SI 10 are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only. 1.4 The following precautionary caveat pertains to the test methods portion, Section 12, only of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

KS M 6703-2021 橡胶线

Rubber threads

BS ISO 22941:2021 牲畜用橡胶布 奶牛 规格

Rubber sheets for livestock. Dairy cattle. Specification

T/ZZB 2575-2021 注射用无菌粉末用卤化丁基橡胶塞

本文件规定了注射用无菌粉末用卤化丁基橡胶塞（以下简称“胶塞”）的产品结构、 基本要求、技术要求、检验方法、 检验规则、标识、包装、运输、贮存和质量承诺。 本标准适用于直接与注射用无菌粉末接触的氯化或溴化丁基橡胶塞（不含冷冻干燥用胶塞）。

Halogenated butyl rubber stopper for injectable sterile powder

ASTM E2015-04(2021) 微观结构检验用塑料和聚合物试样制备的标准指南

1.1 This guide covers recommended procedures and guidelines for the preparation of plastic and polymeric specimens for microstructural examination by light and electron microscopy. 1.2 This guide is applicable to most semi-rigid and rigid plastics, including engineering plastics. This guide is also applicable to some non-rigid plastics. 1.3 The procedures and guidelines presented in this guide are those which generally produce satisfactory specimens. This guide does not describe the variations in techniques required to solve individual problems. 1.4 Many detailed descriptions of grinding and polishing of plastics and polymers are available (1-7).2 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination

ASTM D5336-21 聚邻苯二甲酰胺（PPA）注射成型材料规范的标准分类系统和基础

1.1?This classification system covers polyphthalamide (PPA) materials suitable for injection molding. 1.2?The properties included in this classification system are those required to identify the compositions covered. Other requirements necessary to identify particular character

Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials

ASTM D3307-21 全氟烷氧基（PFA）树脂模塑和挤压材料的标准规范

1.1?This specification covers melt processable molding and extrusion materials of Perfluoroalkoxy (PFA) resin. The materials are copolymers of tetrafluoroethylene and perfluoroalkoxy. 1.2?This specification is intended to provide a means for calling out plastic materials used i

Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials

ISO 22941:2021 牲畜用橡胶板.奶牛.规范

This document specifies the characteristics of solid rubber sheets for dairy cattle. These sheets are used in a walking or lying area. This document does not include design of the product.

Rubber sheets for livestock - Dairy cattle - Specification

T/ZZB 2306-2021 装饰用改性聚氯乙烯软墙

本文件规定了装饰用改性聚氯乙烯软墙(以下简称软墙)的基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本文件适用于以聚氯乙烯树脂为主要原料，添加改性剂、增塑剂及其他添加剂，经压延、印刷、表面处理、发泡、贴合、轧花而制成，用胶粘剂贴于建筑物内墙面或顶棚的装饰材料。

Modified PVC soft wallpaper for decoration

UNI EN 17508-2021 塑料 用于制造门窗的未增塑聚（氯乙烯）（PVC-U）型材 PVC 基材料的术语

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Terminology of PVC based materials

QB/T 5621-2021 回收和再生丙烯腈-丁二烯-苯乙烯共聚物（ABS）分级技术规范

Technical specification for recycling and recycling of acrylonitrile-butadiene-styrene copolymer (ABS) classification

T/JYPA 004-2021 塑料碗柜

1 内容范围 本标准规定了塑料碗柜的主要内容：  （1）范围 ：规定标准的内容结构和适用对象；  （2）规范性引用文件 ：列出标准中引用到的标准及技术文件；  （3）术语和定义 ：规定了包含的产品类型、术语的定义；  （4）分类 ：规定产品的分类方法；  （5）要求 ：规定产品的技术要求；  （6）试验方法 ：规定产品性能要求和实验环境、方法；  （7）检验规则 ：规定产品检验的项目和检验规则；  （8）标志、标签 ：规定产品包装标志、标签内容方面的要求；  （9）包装、运输、贮存 ：规定产品包装、运输、贮存等方面的要求；  2 产品类型 本标准规定的产品是指用聚烯烃或改性聚烯烃作主要原料，加入着色剂等助剂混合后经 热注射成形的各种规格的塑料碗柜。 3 要求的确定 根据收集到的会员企业标准及编制说明，相关产品的检验报告及其他技术资料，确定产 品尺寸偏差、外观、抗破裂性、悬吊变形率、色牢度、耐温、安全性能等方面的要求。  （1）尺寸偏差的要求，规定了各种规格产品尺寸正负误差不超过 2%； （2）从外形、颜色、黑点杂质、气泡、部件配合及其他方面规定合格产品的外观要求；  （3）抗破裂性：规定空容器及承载容器两个条件下跌落的抗破裂性；  （4）悬吊变形率：规定不同上口直径（圆形）、上口长轴（椭圆形）或最长边（矩形或 其他）容器的变形率；  （5）色牢度：用药棉浸 100℃的热水在容器表面上来回摩擦五次应无染色；  （6）耐温试验： ① 有标称使用温度的容器按标称温度度做 2h 的高低温循环试验。 ② 没有标称使用温度的容器分别在 55℃和-10℃环境中保持 2h 应不变形或破裂。  （7）安全要求：接触食品用方面的规定。 4 试验方法的确定 针对要求逐项列出试验方法，参考了企业试验情况资料、企业标准及国家标准相关规定 来确定。规定了产品实际容量、尺寸偏差的要求，外观、抗破裂性、悬吊变形率、色牢度、耐温、 安全性能等方面的实验要求。  5 检验规则 产品分出厂检验和型式检验。 规定组批的规则，每批数量不得超过 10000 只。 规定出厂检验和型式检验各自的检验条件、检验项目、抽样方案、抽样方法、判定规则 和复验规则。  6 标志、标签、包装、运输和贮存 规定产品包装标志、标签、包装、运输和贮存方面的要求。

Plastic basin