83.140.99 其他橡胶和塑料制品 标准查询与下载

ISO/AWI 17880:2023 泡沫塑料——自支撑金属面夹芯板

Cellular plastics — Self-supporting metal faced sandwich panels

HG/T 4666-2023 胶乳海绵

latex sponge

HG/T 2949-2023 电绝缘橡胶板

Electrical insulating rubber sheet

HG/T 6166-2023 织物浸渍聚氨酯胶乳手套

Fabric-impregnated polyurethane latex gloves

HG/T 2821.1-2023 V 带和多楔带用浸胶聚酯线绳 第 1 部分：硬线绳

Rubberized polyester cords for V-belts and V-belts Part 1: Rigid cords

HG/T 2888-2023 橡胶家用手套

rubber household gloves

HG/T 2793-2023 工业用导电和抗静电橡胶板

Conductive and antistatic rubber sheets for industrial use

T/SHPTA 045-2023 车用扎带尼龙材料及制品

本文件规定了车用扎带尼龙材料及制品中的术语和定义、分类与标记、技术要求、试验方法、检验规则、以及标志、包装、运输、与贮存等。

Automobile cable tie of nylon materials and products

T/CASME 549-2023 可移动式塑料垃圾桶

本文件规定了可移动式塑料垃圾桶的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。

Mobile plastic trash can

T/CASME 533-2023 耐高温塑料晶圆盒

本文件规定了耐高温塑料晶圆盒的要求、试验方法、检验规则、标志、包装、运输和贮存。

High temperature resistant plastic wafer box

T/CASME 529-2023 超级鼓型橡胶护舷

本文件规定了超级鼓型橡胶护舷的结构与规格、标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Super drum rubber fender

ISO/PRF TR 22762-7:2023 使用 ISO 22762 进行隔震系统设计和测试的实用指南 第 7 部分：标题缺失

Practical guidance on the use of ISO 22762 for design and testing of seismic isolation systems — Part 7: Title missing

T/ZZB 3047-2023 固体化学肥料用塑料编织袋

本文件规定了固体化学肥料用塑料编织袋（以下简称“编织袋”）的产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺。 本文件适用于以聚丙烯、聚乙烯树脂为主要原料，具有复合编织外袋和内膜袋结构的包装固体化学肥料的编织袋。

Plastic woven sack for solid chemical fertilizer

T/CASME 515-2023 电梯用尼龙轮性能要求及测试方法

本文件规定了电梯用尼龙轮的术语和定义、结构形式、性能要求和测试方法。

Performance requirements and testing methods for nylon wheels used in elevators

ASTM C722-18(2023) 耐化学腐蚀整体地板铺面的标准规范

Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

T/SHDSGY 129-2023 气相防锈膜

本文件规定了气相防锈膜的分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于气相防锈膜。

Gas phase antirust film

QB/T 5813-2023 软质聚氯乙烯板（带）材

Soft polyvinyl chloride board (strip)

T/CRIA 18003-2023 自然硫化丁基橡胶防腐衬里

本文件规定了自然硫化丁基橡胶防腐衬里（含氯化丁基橡胶衬里和溴化丁基橡胶衬里，以下简称橡胶衬里）的术语和定义、产品标记技术要求、试验方法、检验规则、标志、包装、运输与贮存。 本文件适用于在腐蚀工作条件下防止设备受介质腐蚀的场合。

Natural vulcanized butyl rubber anti-corrosion lining

ASTM D6324-11(2023) 聚氨酯制男性避孕套的标准规范

1.1 This specification covers the minimum requirements for individually packaged male condoms made from polyurethane. This specification also describes the minimum inspection and quality levels that shall be utilized in referee tests. It is not intended to be a routine quality control specification for polyurethane condom manufacturing operations. 1.2 This specification is intended to assist buyers in obtaining male polyurethane condoms of consistent quality. The safe and proper use of male polyurethane condoms is excluded from the scope of these test methods. 1.3 The annexes in these test methods include important information, such as that on apparatus or materials, that are a mandatory part of these test methods but too detailed for inclusion in the main text. 1.4 The appendixes in these test methods contain information intended to provide guidance. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 It shall be the responsibility of the manufacturer for any condom design that falls outside the specifications of this standard to determine testing methodology and substantiate the appropriateness of that methodology to assure the quality of the condoms to the purchaser and to the government regulatory authority having jurisdiction. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Male Condoms Made from Polyurethane

ISO/CD TR 22762-7:2023 使用 ISO 22762 进行隔震系统设计和测试的实用指南 第 7 部分：标题缺失

Practical guidance on the use of ISO 22762 for design and testing of seismic isolation systems — Part 7: Title missing