83.200 橡胶和塑料工业设备 标准查询与下载

DB44/T 461-2007 2008-04-01

本标准规定了精密塑料注射成型机的术语和定义、分类与命名、要求、试验方法、检验规则和标志、使用说明书、包装、运输和贮存。本标准适用于合模力不大于30 000kN的精密塑料注射成型机（以下简称“注塑机” ）.

Precision plastic injection moulding machine

NF E63-609-1:2007 橡胶和塑料机器.尺寸削减机器.第1部分:刀片粒化器的安全要求

Plastics and rubber machines - Size reduction machines - Part 1 : safety requirements for blade granulators.

DIN EN 12012-1:2007 塑料和橡胶机械.尺寸减小机械.第1部分:刀片造粒机的安全要求

This document specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules. The machine begins with the outer edge of the feed opening, or feeding device if it is an integral part of the machine, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this document. This document does not deal with hazards caused by processing harmful materials. This document is not applicable to machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators; German version EN 12012-1:2007

BS EN 12012-1:2007+A1:2008 塑料和橡胶机械.粉碎机.刀片制粒机的安全要求

This document specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules. The machine begins with the outer edge of the feed opening, or feeding device if it is an integral part of the machine, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this document. This document does not deal with hazards caused by processing harmful materials. This document is not applicable to machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Size reduction machines - Safety requirements for blade granulators

BS EN 12012-1:2007 塑料和橡胶机械.粉碎机.刀片制粒机的安全要求

This document specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules. The machine begins with the outer edge of the feed opening, or feeding device if it is an integral part of the machine, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this document. This document does not deal with hazards caused by processing harmful materials. This document is not applicable to machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Size reduction machines - Safety requirements for blade granulators

EN 12012-1:2007 塑料和橡胶机械.尺寸减小机械.第1部分:刀片造粒机的安全要求.包含修改件A1-2008

This document specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules. The machine begins with the outer edge of the feed opening, or feeding device if it is an integral part of the machine, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject toThis document.This document does not deal with hazards caused by processing harmful materials.This document is not applicable to machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators (Incorporates Amendment A1: 2008)

ANSI B151.1-2007 水平注模机.制造、维护和使用的安全要求

The requirements of this standard shall apply to all HIMM's that process plastic materials and inject said material into a mold held closed by a horizontally acting clamp.

Horizontal Injection Molding Machines ?Safety Requirements for Manufacture, Care, and Use

ANSI/SPI B151.1-2007 塑料机械.卧式喷射模塑机.制造、维护和使用的安全要求

The requirements of this standard shall apply to all HIMM's that process plastic materials and inject said material into a mold held closed by a horizontally acting clamp.

Plastics Machinery - Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use

DIN EN 12012-4:2007 塑料和橡胶机械.粉碎机.第4部分:电器除尘器的安全要求

This European Standard specifies the essential safety requirements applicable to the design and construction of agglomerators used to densify plastic scrap, reducing its size and/or volume. The limits of the agglomerator are as follows: - the outer edge of the feed opening, or outer edge of the fixed feed device (e.g. hopper) or the interface between the feed system (e.g. conveyor) and the agglomerator chamber and - the outer edge of the discharge opening of the agglomerator chamber or the interface betweem the agglomerator chamber and the discharge system. Only the significant hazards listed in Clause 4 and dealt with in Clause 5 are subject to this European Standard. This European Standard does not deal with hazards caused by processing materials (such as Expanded Polystyrene (EPS) and Polyurethane (PU) foam) which, when heated, may lead to a risk of fire and release of toxic gases. This European Standard does not deal with hazards caused by upstream and/or downstream equipment. This European Standard is not applicable to agglomerators manufactured before the date of its approval as EN.

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators; German version EN 12012-4:2006

JB/T 5417-2007 塑料排气挤出机

本标准规定了单螺杆塑料排气挤出机（以下简称挤出机）的基本参数、要求、试验方法和检验规则、标志、包装、运输及贮存。 本标准适用于加工塑料制品或半成品的直接抽气式单螺杆挤出机。 本标准不适用于非直接抽气式单螺杆挤出机和多排气口大脱挥型等特殊排气挤出机。

Plastics vented extruder

JB/T 5291-2007 塑料破碎机

本标准规定了塑料破碎机的术语、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于单轴旋转式塑料破碎机（简称破碎机）。 本标准不适用于立式塑料破碎机。

Plastic crusher

NF E63-609-4:2007 塑料和橡胶工业机械.粉碎机.第4部分:凝聚剂的安全要求

Plastics and rubber machines - Size reduction machines - Part 4 : safety requirements for agglomerators.

EN 15067:2007 塑料和橡胶机械.袋子用薄膜加工机.安全要求

This European Standard specifies the safety requirements applicable to the design and construction of film converting machines for making bags and sacks, for the significant and specific hazards listed in Clause 4.This type of machine is based on the welding process. A film converting machine for bags and sacks starts at the film unwinding unit or at the film inlet whenThis machine is directly fed by an upstream process and ends at the product collection or delivery unit. The bag making line may include: 1) unwind units 2) slit-welding units 3) gussetting units 4) lane deviation units 5) perforating and welding or cutting and welding units 6) blocking units 7) pick-up and transfer units 8) stacking units 9) punching units 10) folding units 11) winding units 12) labelling or taping units 13) handle and closure units 14) draw tape insertion units 15) generators of electrostatic charge 16) electrostatic discharge equipment. Printing units, high frequency welding machines and the design and construction of electrostatic generators are not covered byThis standard. Ultrasonic radiation hazards resulting from ultrasonic welding devices, e. g. integrated in handle and closure units, are not covered byThis standard. Film converting machines for bags and sacks generally do not create explosive atmospheres. In principle they therefore correspond with line F of Table 2 of the ATEX Guideline and consequently do not fall within the scope of Directive 94/9/EC.This document is not applicable to machines which are manufactured before the date of its publication as EN.

Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements

BS EN 12012-4:2006+A1:2008 橡胶和塑料机械.粉碎机.第4部分:凝聚器安全要求

This European Standard specifies the essential safety requirements applicable to the design and construction of agglomerators used to densify plastic scrap, reducing its size and/or volume. The limits of the agglomerator are as follows:  the outer edge of the feed opening, or outer edge of the fixed feed device (e.g. hopper) or the interface between the feed system (e.g. conveyor) and the agglomerator chamber and  the outer edge of the discharge opening of the agglomerator chamber or the interface between the agglomerator chamber and the discharge system. Only the significant hazards listed in Clause 4 and dealt with in Clause 5 are subject to this European Standard. This European Standard does not deal with hazards caused by processing materials (such as Expanded Polystyrene (EPS) and Polyurethane (PU) foam) which, when heated, may lead to a risk of fire and release of toxic gases. This European Standard does not deal with hazards caused by upstream and/or downstream equipment. This European Standard is not applicable to agglomerators manufactured before the date of its approval as EN.

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

BS EN 12012-4:2006 橡胶和塑料机械.粉碎机.电器除尘器的安全要求

This European Standard specifies the essential safety requirements applicable to the design and construction of agglomerators used to densify plastic scrap, reducing its size and/or volume. The limits of the agglomerator are as follows: ? the outer edge of the feed opening, or outer edge of the fixed feed device (e.g. hopper) or the interface between the feed system (e.g. conveyor) and the agglomerator chamber and ? the outer edge of the discharge opening of the agglomerator chamber or the interface between the agglomerator chamber and the discharge system. Only the significant hazards listed in Clause 4 and dealt with in Clause 5 are subject to this European Standard. This European Standard does not deal with hazards caused by processing materials (such as Expanded Polystyrene (EPS) and Polyurethane (PU) foam) which, when heated, may lead to a risk of fire and release of toxic gases. This European Standard does not deal with hazards caused by upstream and/or downstream equipment. This European Standard is not applicable to agglomerators manufactured before the date of its approval as EN.

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

NF T51-902:2006 塑料.摆锤冲击试验机的鉴定.试验机.却贝、艾卓德和拉伸冲击试验

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing.

DIN EN ISO 13802:2006 塑料.摆锤冲击试验机鉴定.却贝、艾卓德和拉伸冲击试验

This standard specifies methods for the verification of pendulum impact-testing machines used for the Charpy impact test, Izod impact test and tensile impact test described in ISO 179-1, ISO 180 and ISO 8256, respectively.#,,#

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000); English version of DIN EN ISO 13802:2006-06

LST EN ISO 13802:2006 塑料 摆锤冲击试验机的验证 夏比冲击试验、悬臂梁冲击试验和拉伸冲击试验（ISO 13802:1999，包括勘误表 1:2000）

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000)

DS/EN ISO 13802:2006 塑料 摆锤式冲击试验机的验证 夏比冲击试验、悬臂梁冲击试验和拉伸冲击试验

This standard specifies methods for the verification of pendulum impact-testing machines used for theCharpy impact test, Izod impact test and tensile impact test described in ISO 179-1, ISO 180 and ISO 8256, respectively.The test machines covered by this International Standard are of the pendulum type. The impact energy W (see 3.12) absorbed in impacting a test specimen is taken as being equal to the difference between the potential energy E (see 3.11) of the pendulum and the energy remaining in the pendulum after impacting the specimen. The impact energy is corrected for friction and air-resistance losses (see Table 2 and 5.6).Methods are described for ver

Plastics – Verification of pendulum impact-testing machines – Charpy, Izod and tensile impact-testing

DS/EN ISO 483:2006 塑料 使用水溶液调节和测试的小型外壳，以将湿度保持在恒定值

This standard establishes guidelines for the construction and use of enclosures with volumes less than 200 dm3, in order to obtain atmospheres of constant relative humidity at given temperatures, using saturated aqueous salt solutions, glycerol/water solutions or sulfuric acid/water solutions, for conditioning and testing plastics. It specifies the procedures to be followed to maintain the relative humidities of the conditioning and testing atmospheres within the required tolerances, at the temperatures specified by particular International Standards.

Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value