83.200 橡胶和塑料工业设备 标准查询与下载

ANSI B151.27-2003 塑料机械.与水平和垂直注模机一同使用的遥控设备.集成、维护和使用的安全要求.ANSI/SPI B151.27-1994修改件

Criteria establishing safe practicesand procedures for the use of robots with horrizontal and vertical injection molding machines.

Plastics Machinery Robots Used with Horizontal and Vertical Injection Molding Machines Safety Requirements for the Integration, Care, and Use Revision of ANSI/SPI B151.27-1994

ANSI B151.21-2003 塑料机械.喷注模压机.制造、维护和使用的安全要求

Plastics Machinery - Injection Blow Molding Machines - Safety Requirements for Manufacture, Care and Use

ANSI/SPI B151.21-2003 注坯吹塑模机建造、保养和使用的安全性要求

The requirements of this standard shall apply to all injection blowmolding machines (IBMMs - including stretch blow) that process plastic materials and produce and/or deliver a perform that is then blown into the shape of a mold held together by vertically or horizontally acting clamp(s).

Injection Blow Molding Machines, Safety Requirements for the Construction, Care, and Use of

SANS 5893:2003 橡胶和塑料测试设备．拉力，弯曲和压缩测试（恒定横移速率）．规范

Specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbrs, plastics and adhesives, although any one system may only be applicable to a narrower range of materials. It also covers such system

Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

BS ISO 5893:2002 橡胶和塑料的试验设备.拉伸、弯曲和压缩型（横动的速率）.规范

This International Standard specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbers, plastics and adhesives, although any one system may only be applicable to a narrower range of materials. It also covers such systems when used for flexural, shear and compression tests.

Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

JB/T 10342-2002 塑料挤出异型材辅机

本标准规定了塑料挤出异型材辅机的基本参数、技术要求、试验方法和检验规则、标志、包装、运输和贮存。 　　本标准适用于与挤出机配套使用，能将挤出机的隔料制成异型材制品的成型机械。

Profile shapes extrusion accessory

JB/T 6494-2002 料斗式塑料干燥机

本标准规定了料斗式塑料干燥机的基本参数、技术要求、试验方法、检验规则，以及标志、包装、运输和贮存。 本标准适用于料斗式塑料干燥机。

Hopper type plastic dryer

ISO 5893:2002 橡胶塑料拉力、压力和弯曲试验机(恒速驱动) 技术规范

This International Standard specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbers, plastics and adhesives, although any one system may only be applicable to a narrower range of materials. It also covers such systems when used for flexural, shear and compression tests.

Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

HG/T 3222-2001 V带鼓式硫化机系列与基本参数

本标准规定了V带鼓式硫化机的规格系列和基本参数。 本标准适用于连续硫化橡胶V带的鼓式硫化机。

Series and basic parameters of rotary curing machine for V-belt

HG/T 3228-2001 橡胶塑料机械涂漆通用技术条件

本标准规定了橡胶、塑料机械产品涂漆要求、检测方法及检验规则等。 本标准适用于橡胶、塑料机械产品的涂漆。

General specifications of painting for rubber and plastics machinery

HG/T 3224-2001 试验用开放式炼胶机

本标准规定了试验用开放式炼胶机的技术要求、安全要求、试验方法、检验规则、标志、使用说明书、包装、运输及贮存。 本标准适用于橡胶加工试验用的开炼机。

Mill for test

NF E63-609-2:2001 橡胶和塑料机械.粉碎机.第2部分:线料切粒机的安全要求

Rubber and plastics machines - Size reduction machines - Part 2 : safety requirements for strand pelletisers.

BS EN 12012-2:2001+A2:2008 橡胶和塑料机械.粉碎机.多芯铰线的安全性要求

This standard specifies the essential safety requirements applicable to the design and construction of strand pelletisers used for plastics and rubber and fed continuously by an extruder or a reactor. The machine begins with the feed opening of the feeding device, or start-up devices if fitted, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this standard. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. This standard applies to machines which are manufactured after the date of approval of this standard by CEN.

Rubber and plastics machines - Size reduction machines - Safety requirements for strand pelletisers

BS EN 12012-2:2001 橡胶和塑料机.粒度减小机.多芯铰线的安全要求

This standard specifies the essential safety requirements applicable to the design and construction of strand pelletisers used for plastics and rubber and fed continuously by an extruder or a reactor. The machine begins with the feed opening of the feeding device, or start-up devices if fitted, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this standard. NOTE: Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. This standard applies to machines which are manufactured after the date of approval of this standard by CEN.

Rubber and plastics machines - Size reduction machines - Safety requirements for strand pelletisers

NF E63-609-3:2001 橡胶和塑料机械.粉碎机.第3部分:粉碎机的安全要求

Rubber and plastics machines - Size reduction machines - Part 3 : safety requirements for shredders.

EN 12012-2:2001 橡胶和塑料机.粉碎机.第2部分:绞线成球机的安全要求.包含修改件A2-2008

This standard specifies the essential safety requirements applicable toThe design and construction ofstrand pelletisers used for plastics and rubber and fed continuously by an extruder or a reactor.The machine begins withThe feed opening of the feeding device, or start-up devices if fitted, and ends withThedischarge area.OnlyThe significant hazards listed in clause 4 and dealt with in clause 5 are subject toThis standard.NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosiveatmospheres can be applicable toThe type of machine or equipment covered byThis European Standard.The presentstandard is not intended to provide means of complying withThe essential health and safety requirements of Directive94/9/EC.This standard applies to machines which are manufactured afterThe date of approval of this standard byCEN.

Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers (Incorporates Amendment A2: 2008)

BS EN 1114-3:2001 橡胶和塑料机械.挤压机和挤压生产线.产品拉出的安全性要求

This European Standard contains the safety requirements for the design and construction of haul-offs used in extrusion lines for processing plastics and rubber for the hazards identified in clause 4. The following kinds of haul-offs are covered: —caterpillar haul-offs; —belt haul-offs; —capstan haul-offs; —belt capstan haul-offs; —roller haul-offs. The machine begins at the material inlet opening and ends at the material outlet. Cutting units which are integrated with or attached to the haul-off are not covered. Take-off devices used at film or sheet lines are not covered. Chemical, toxicological and fire hazards which could occur for example in continuous vulcanization plants due to the materials processed are not dealt with. Unwinding and winding machines are not subject to this standard. They are being dealt with in a separate standard being produced by another working group of CEN/TC 145. This document is not applicable to haul-offs which are manufactured before the date of publication by CEN of this document.

Rubber and plastics machines - Extruders and extrusion lines - Safety requirements for haul-offs

BS EN 12012-3:2001 橡胶和塑料机械.粉碎机.粉碎机的安全要求

This standard specifies the essential safety requirements applicable to the design and construction of shredders used for plastic and rubber. The machine begins with the outer edge of the feed hopper and ends with the discharge area. This standard does not deal with equipment for feeding material or discharging shredded material. This standard does not deal with safety measures to reduce the risk from ignition of flammable residues in material to be shredded. This standard does not deal with requirements for local exhaust ventilation systems. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this standard. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard may be necessary to satisfy Directive 94/9/EC. This standard applies to machines which are manufactured after the date of approval of this standard by CEN.

Rubber and plastics machines - Size reduction machines - Safety requirements for shredders

BS EN 1114-3:2001+A1:2008 塑料和橡胶机械.挤压机及挤压生产线.切割机的安全要求

This European Standard contains the safety requirements for the design and construction of haul-offs used in extrusion lines for processing plastics and rubber for the hazards identified in clause 4. The following kinds of haul-offs are covered: ⎯ caterpillar haul-offs; ⎯ belt haul-offs; ⎯ capstan haul-offs; ⎯ belt capstan haul-offs; ⎯ roller haul-offs. The machine begins at the material inlet opening and ends at the material outlet. Cutting units which are integrated with or attached to the haul-off are not covered. Take-off devices used at film or sheet lines are not covered. Chemical, toxicological and fire hazards which could occur for example in continuous vulcanisation plants due to the materials processed are not dealt with. Unwinding and winding machines are not subject to this standard. They are being dealt with in a separate standard being produced by another working group of CEN/TC 145. This document is not applicable to haul-offs which are manufactured before the date of publication by CEN of this document.

Plastics and rubber machines - Extruders and extrusion lines - Safety requirements for haul-offs

BS EN 12012-3:2001+A1:2008 橡胶和塑料机械.粉碎机.第3部分:碎纸机的安全性要求

This standard specifies the essential safety requirements applicable to the design and construction of shredders used for plastic and rubber. The machine begins with the outer edge of the feed hopper and ends with the discharge area. This standard does not deal with equipment for feeding material or discharging shredded material. This standard does not deal with safety measures to reduce the risk from ignition of flammable residues in material to be shredded This standard does not deal with requirements for local exhaust ventilation systems. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this standard. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard may be necessary to satisfy Directive 94/9/EC. This standard applies to machines which are manufactured after the date of approval of this standard by CEN.

Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders