83.200 橡胶和塑料工业设备 标准查询与下载

HG/T 3686-2000 轿车子午线轮胎第二段成型机技术条件

Second stage radial passenger car tyre building machine technical specifications

HG/T 3223-2000 橡胶机械术语

Rubber machinery - Terminology

EN 12013:2000 橡胶和塑料机械.密闭式混合机.安全要求;包含修改件A1-2008

This standard applies to internal mixers for rubber and plastics as defined in 3.1.The safety requirements and/or measures specified inThis standard apply to all internal mixers irrespective of their size and irrespective of the control modes of the hopper front door and discharge door.The safety requirements forThe design of exhaust systems and ancillary equipment are not covered byThis standard.The safety requirements forThe interaction between internal mixers and ancillary equipment are specified.This standard coversThe significant hazards listed in Clause 4.This standard is not applicable to internal mixers which are manufactured beforeThe date of publication of this standard by CEN.

Plastics and rubber machines - Internal mixers - Safety requirements (Incorporates Amendment A1: 2008)

ISO 13802:1999/cor 1:2000 塑料 摆锤冲击试验机的鉴定 却贝、艾卓德和拉伸冲击试验 技术勘误1

This standard is Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing; Technical Corrigendum 1

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing; Technical Corrigendum 1

BS EN ISO 13802:2006 塑料.摆锤冲击鉴定.试验机.却贝,艾卓德和拉伸冲击.试验

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing

BS EN 12409:1999 橡胶和塑料机械.热成形机.安全要求

This standard specifies the essential safety requirements for the design and construc-tion of thermoforming machines, for continuous sheet and single sheets, of all types. Significant hazards are listed in clause 4 and specific safety requirements and/or meas-ures are listed in clause 5. A thermoforming machine may consist of one or more units linked together. This stan-dard covers the following units: - continuous sheet unwind unit - single sheet feed unit - material intake - conveying equipment - heating unit - preheating unit - edge heating unit - forming station - finishing station - stacking station - discharge station - residual sheet winding unit - sheet cutting unit. This standard does not apply to units mounted upstream or downstream of the thermo-forming machine and - which have a separate control and/or - are located separately and/or - have their own material intake This standard does not apply to units which are integrated into form, fill and seal ma-chines. These are covered in prEN 415-3:1996. This standard does not apply to units which incorporate heating systems which are fu-elled by gas. This standard applies to machines which are manufactured after the date of approval by CEN.

Rubber and plastics machines - Thermoforming machines - Safety requirements

ISO 13802:1999 塑料 摆锤冲击试验机的鉴定 却贝、艾卓德和拉伸冲击试验

This International Standard specifies methods for the verification of pendulum impact-testing machines used for the Charpy impact test, Izod impact test and tensile impact test described in ISO 179-1, ISO 180 and ISO 8256, respectively. The test machines covered by this International Standard are of the pendulum type. The impact energy W (see 3.12) absorbed in impacting a test specimen is taken as being equal to the difference between the potential energy E (see 3.11) of the pendulum and the energy remaining in the pendulum after impacting the specimen. The impact energy is corrected for friction and air-resistance losses (see Table 2 and 5.6). Methods are described for verification of the geometrical and physical properties of the different parts of the test machine. The verification of some geometrical properties is difficult to perform on the assembled instrument. It is therefore assumed that the manufacturer is responsible for the verification of such properties and for providing reference planes on the instrument that enable proper verification in accordance with this International Standard. These methods are for use when the machine is being installed, is being repaired, has been moved or is undergoing periodic checking. This International Standard is applicable to pendulum-type impact-testing machines, of different capacities and/or designs, with the geometrical and physical properties defined in clause 5. A pendulum impact-testing machine verified in accordance with this International Standard, and assessed as satisfactory, is considered suitable for impact testing with unnotched and notched test specimens of different types. Annex A describes the relationships between the various characteristic pendulum lengths, the potential energy and the moment of inertia of the pendulum. Annex B explains how to calculate the ratio of frame mass to pendulum mass required to avoid errors in the impact energy. Annex C describes, for Charpy impact testing, the changes in pendulum velocity just after impact as a function of impact energy and gives the ranges of impact energies for the measurement of which pendulums of specified capacity have to be used. Annex D discusses the stiffness of the base of the frame necessary to avoid resonant oscillations in the frame due to reaction forces caused by the moving pendulum. Annex E gives the dimensions of a gauge plate suitable for the verification of Charpy impact-testing machines.

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing

HG/T 3229-1999 平板硫化机检测方法

Testing and measuring methods for daylight press

HG/T 3654-1999 橡胶磨片机技术条件

Specifications of rubber abrasion test pieces machine

HG/T 3034-1999 平板硫化机

本标准规定了平板硫化机的型号、基本参数、要求、安全要求、检验规则及检验方法等。 本标准适用于硫化橡胶制品盼液压平板硫化机。

Daylight press

JB/T 6489-1999 塑料捏合机

本标准规定了塑料捏合机的基本参数，技术要求，试验方法与检验规则，标志、包装、运输及贮存。 本标准适用于塑料原料及其他材料捏合、搅拌用的双桨平行配置的卧式捏合机。

Plastics kneader

BS EN 1114-2:1998+A1:2008 塑料和橡胶设备.挤塑机和挤塑生产线.第2部分:模面造球机安全性要求

This European Standard specifies safety requirements for the design and construction, in respect of the hazards listed in clause 4 and dealt with in clause 5, of the following kinds of die face pelletisers used with extruders for pelletising of plastics and rubber: -Underwater pelletisers; -Water ring pelletisers; -Dry pelletisers; -Centrifugal pelletisers; -Knife rotor pelletisers. Strand pelletisers are not subject to this standard. They are dealt with in a separate standard being produced by CEN/TC 145/WG6. This standard does not cover requirements for the design of any exhaust system. This standard applies to machines which are manufactured after the date of publication by CEN of the standard.

Plastics and rubber machines - Extruders and extrusion lines - Part 2:Safety requirements for die face pelletisers

BS EN 1114-2:1998 橡胶和塑料机械.挤出机和挤出生产线.模具表面造粒机的安全要求

Specifies the safety requirements for the design and construction of underwater, water ring, dry, centrifugal and knife rotor pelletizers.

Rubber and plastics machines - Extruders and extrusion lines - Safety requirements for die face pelletizers

NF E63-607-2:1998 橡胶和塑料机械.挤压机和挤压流水线.第2部分:冲模表面造粒机的安全要求(欧洲标准EN 1114-2)

Rubber and plastics machines. Extruders and extrusion lines. Part 2 : safety requirements for die face pelletisers.

JB/T 8703-1998 塑料挤出吹塑薄膜辅机

本标准规定了塑料挤出吹塑薄膜辅机的系列、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于吹塑薄膜制品的塑料挤出吹塑薄膜辅机。

Plastics extrusion-blown film accessory

JB/T 8698-1998 热固性塑料注射成型机

本标准规定了热固性塑料注射成型机的型号、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于单螺杆、单工位、卧式热固性塑料注射成型机。

Thermosetting injection moulding machine

HG/T 3120-1998 橡胶塑料机械外观通用技术条件

The general technological requirements for the appearance of the rubber and plastic machinery

HG/T 3108-1998 冷硬铸铁辊筒

Chilled cast iron roll

HG/T 3118-1998 冷硬铸铁辊筒检验方法

Methods for testing of chilled cast iron roll

NF E63-612-1:1998 橡胶和塑料机械.反应铸模机械.第1部分:计量和混合元件的安全要求

Rubber and plastics machines. Reaction moulding machines. Part 1 : safety requirements for metering and mixing units.