83.200 橡胶和塑料工业设备 标准查询与下载

EN 1114-2:1998 塑料和橡胶设备.挤塑机和挤塑生产线.第2部分:模面造球机安全要求.包含修改件A1-2008

This European Standard specifies safety requirements forThe design and construction, in respect of the hazards listed in clause 4 and dealt with in clause 5, of the following kinds of die face pelletisers used with extruders for pelletising of plastics and rubber:

Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers (Incorporates Amendment A1: 2008)

HG/T 20640-1997 塑料设备

Plastic Equipmendt

BS EN 1612-1:1997 橡胶和塑料机械.反应模塑机.测量和混合装置的安全性要求

This standard specifies the health and safety requirements for the design of metering and mixing units for reaction moulding machines. The significant and specific hazards are listed in clause 4 and are dealt with in this standard. This standard does not cover completely the hazards arising from the use of highly flammable additives, for example pentane used as a blowing agent (see 4.7), because these hazards depend to a large extent on the additives and processes used. This standard does not cover the hazards arising from the assembly of separate units not supplied at the same time by the same manufacturer. This standard does not cover the hazards arising from the movement of powered mixing heads; for these, see prEN 1612-2. This standard applies to metering and mixing units manufactured after the date of publication of this standard.

Rubber and plastics machines - Reaction moulding machines - Safety requirements for metering and mixing units

BS EN 1612-1:1997+A1:2008 塑料和橡胶设备.反应成型设备.第1部分:计量和混合装置的安全性要求

This standard specifies the health and safety requirements for the design of metering and mixing units for reaction moulding machines. The significant and specific hazards are listed in clause 4 and are dealt with in this standard. This standard does not cover completely the hazards arising from the use of highly flammable additives, for example, pentane used as a blowing agent (see 4.7), because these hazards depend to a large extent on the additives and processes used. This standard does not cover the hazards arising from the assembly of separate units not supplied at the same time by the same manufacturer. This standard does not cover the hazards arising from the movement of powered mixing heads; for these, see EN 1612-2. This standard applies to metering and mixing units manufactured after the date of publication of this standard.

Plastics and rubber machines - Reaction moulding machines - Part 1.Safety requirements for metering and mixing units

BS 7825-3.6:1997 橡胶和塑料试验设备的校准.校准一览表.尺寸性能

Provides schedules for the calibration of a range of methods of tests used for the evaluation and investigation of the dimensional properties of rubber and plastics materials.

Calibration of rubber and plastics test equipment - Calibration schedules - Dimensional properties

EN 1612-1:1997 橡胶和塑料机械.反应模塑机械.第1部分:测量和混合装置的安全要求;包含修改件A1-2008

This standard specifies the health and safety requirements forThe design of metering and mixing units for reaction moulding machines.The significant and specific hazards are listed in clause 4 and are dealt with inThis standard.This standard does not cover completelyThe hazards arising fromThe use of highly flammable additives, for example, pentane used as a blowing agent (see 4.7), becauseThese hazards depend to a large extent onThe additives and processes used.This standard does not coverThe hazards arising fromThe assembly of separate units not supplied atThe same time byThe same manufacturer.This standard does not coverThe hazards arising fromThe movement of powered mixing heads; forThese, see "EN 1612-2".This standard applies to metering and mixing units manufactured afterThe date of publication of this standard.

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units (Incorporates Amendment A1: 2008)

NF E63-607-1:1997 橡胶和塑料机械.挤压机和挤压生产线.第1部分:挤压机的安全要求

Rubber and plastics machines. Extruders and extrusion lines. Part 1 : safety requirements for extruders.

JB/T 8538-1997 塑料机械用螺杆、机筒

本标准规定了塑料机械用螺杆、机筒的技术要求、试验方法与检验规则、标志、包装、运输及贮存。 本标准适用于单螺杆塑料挤出机和塑料注射成型机等塑料机械用螺杆和机筒。

Screws and barrels for plastic machinery

BS EN 1417+A1:1997 橡胶机械和塑料机械 双辊磨碎机 安全性要求

Plastics and rubber machines. Two roll mills. Safety requirements

JB/T 8539-1997 塑料挤吹塑中空成型机

本标准规定了塑料挤出吹塑中空成型机的基本参数、技术要求、试验方法与检验规则、标志、包装、运输及贮存。 本标准适用于挤吹法加工塑料中空制品的成型机其他特殊用途的中空机亦可参照执行。

Plastics extrusion hollow blow molding machine

BS EN 1417:1996+A1:2008 橡胶机械和塑料机械.双辊磨碎机.安全性要求

This standard covers the essential health and safety requirements for all two roll mills for the processing of rubber and plastics. Significant hazards are listed in clause 4 and are covered by this standard. Figure 1 shows the principal parts of a two roll mill. This standard does not cover requirements for the design of an exhaust system. This standard applies to two roll mills which are manufactured after the date of issue of this standard.

Plastics and rubber machines - Two roll mills - Safety requirements

BS EN 1114-1:1997 橡胶和塑料制造机器.挤压机和挤压工作线.第1部分:挤压设备的安全性要求

In respect of the hazards listed in 4.1 and dealt with in clause 5, this standard specifies the safety requirements for the design and construction of the following kinds of screw type extruders for plastics and rubber. - single screw extruders; - twin screw extruders; - multi/multiple screw extruders; - hot feed extruders; - cold feed extruders; - vacuum extruders; - pin extruders. This standard also covers the following feeding systems: - hoppers; - single roller feeding systems; - double roller feeding systems; - crammer feeding systems: and the following ancillary equipment which form part of or are attached to the extruder - screen changers; - melt/gear pumps; - melt ducts; - static mixers; - degassing equipment; - shear head devices; - extruder head. This standard only applies to extruder heads that give initial shape to the plasticized material. This standard does not apply to extruders without screws, e.g.: - piston extruders; - disc extruders; - roller extruders. This standard applies primarily to machines which are manufactured after the date of approval of this European Standard.

Rubber and plastics machines - Extruders and extrusion lines - Safety requirements for extruders

BS EN 1417:1997 橡胶和塑料加工机械.双辊研磨机的安全性要求

This standard covers the essential health and safety requirements for all two roll mills for the processing of rubber and plastics. Significant hazards are listed in clause 4 and are covered by this standard. Figure 1 shows the principal parts of a two roll mill. This standard does not cover requirements for the design of an exhaust system. This standard applies to two roll mills which are manufactured after the date of issue of this standard.

Rubber and plastics machines - Two roll mills - Safety requirements

BS 7825-3.1:1997 橡胶和塑料试验设备的校正.校正一览表.热性能

This Section of BS 7825 provides schedules for the calibration of a range of methods of test used for the evaluation of the thermal properties of plastics materials.

Calibration of rubber and plastics test equipment - Calibration schedules - Thermal properties

BS 7825-2:1996 橡胶和塑料试验设备的校准.校准程序

Describes methods of calibration for a range of parameters applicable to rubber and plastics test equipment.

Calibration of rubber and plastics test equipment - Calibration procedures

JB/T 8507-1996 高频塑料热合机

本标准规定了高频塑料热合机的产品分类、技术要求、试验方法、检验规贝4和技术分级、标志、包装、运输、贮存、订购和供货等。 本标准适用于标称频率为1～300 MHz，额定输出功率大于0.05kW的热合机。 各类热合机的企业产品标准应根据本标准制定，并根据其特殊要求在相应的条文中作补充规定。

High frequency plastic heat sealing machine

NF E63-608:1996 橡胶和塑料加工机械.双辊研磨机.安全性要求(欧洲标准EN 1417)

Rubber and plastics machines. Two roll mills. Safety requirements.

EN 1417:1996 橡胶和塑料加工机器.双辊式破碎机.安全要求.包含修改件A1-2008;合并勘误表-2009年5月

This standard coversThe essential health and safety requirements for all two roll mills forThe processing of rubber and plastics. Significant hazards are listed in clause 4 and are covered byThis standard. Figure 1 showsThe principal parts of a two roll mill.This standard does not cover requirements forThe design of an exhaust system.This standard applies to two roll mills which are manufactured afterThe date of issue of this standard.

Plastics and rubber machines - Two roll mills - Safety requirements Incorporates Amendment A1: 2008; Incorporating corrigendum May 2009

BS EN 422:1996 橡胶和塑料.机械.安全性.生产塑料空心制品的吹模机械.设计和制造要求

This standard covers essential health and safety requirements for the design of blow moulding machines for the processing of plastics. The significant hazards inherent in blow moulding machines are listed in clause 4. Health and safety requirements for extruders, or injection moulding machines which may be a part of blow moulding machines are not covered by this standard. For these machines see prEN 1114-1 and EN 201. The safety requirements for the interaction between blow moulding machines and ancillary equipment are stipulated. The technical safety requirements for the design of this equipment are not covered. The standard does not cover the requirements for the design of the exhaust system. This standard applies primarily to blow moulding machines manufactured after the date of publication of this standard. note:* The standard cannot be applied to lines blowing films.

Rubber and plastics - Machines - Safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction

SNI 05-4390-1996 模具塑料

Location lock for moulds of plastics