83.200 橡胶和塑料工业设备 标准查询与下载
共找到 545 条与 橡胶和塑料工业设备 相关的标准，共 37 页
Specifies the principles of calibration and general requirements for measurement traceability, the basis for deciding calibration intervals and estimates of uncertainty.
Calibration of rubber and plastics test equipment - Specification for principles and general requirements
- ICS
- 83.200
- CCS
- N72
- 发布
- 1995-11-15
- 实施
- 1995-11-15
Rubber and plastics machines. Safety. Blow moulding machines intented for the production of hollow articles. Requirements for the design and construction.
- ICS
- 83.200
- CCS
- G95
- 发布
- 1995-11-01
- 实施
- 1995-11-05
1.1 This practice is intended for determining the temperature at a specified point or points on the surface of the cavity and base of a mold for plastics. By determining the temperature at as many points as deemed necessary, the overall temperature condition of the surface can be determined.1.2 The values stated in SI units are to be regarded as standard. The values in brackets are given for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 1There is no similar ISO standard.
Standard Practice for Determining Surface Temperature of Molds for Plastics
- ICS
- 83.200
- CCS
- G31
- 发布
- 1995
- 实施
1.1 This practice is intended for determining the temperature at a specified point or points on the surface of the cavity and base of a mold for plastics. By determining the temperature at as many points as deemed necessary, the overall temperature condition of the surface can be determined.1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are given for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 1--There is no similar ISO standard.
Standard Practice for Determining Surface Temperature of Molds for Plastics
- ICS
- 83.200
- CCS
- 发布
- 1995
- 实施
Tools for moulding. Sprue bushes. Dimensions.
- ICS
- 83.200
- CCS
- J62
- 发布
- 1994-12-01
- 实施
- 1994-12-20
本标准规定了橡胶专业哑铃型、直角型、新月型裁刀的技术条件、试验方法，检验规则、包装和贮存。 本标准适用于裁切哑铃型、直角型、新月型的硫化橡胶试样的哑铃型，直角型和新月型裁刀。
Technical conditions for rubber special cutter
- ICS
- 83.200
- CCS
- G95
- 发布
- 1994-10-26
- 实施
- 1995-03-01
本标准规定了塑料挤出拉丝辅机的术语，基本参数，技术要求，试验方法，检验规则，标志、包装、运输、贮存。 本标准适用于塑料挤出拉丝辅机。
Plastic extrusion auxiliary drawbench
- ICS
- 83.200
- CCS
- G95
- 发布
- 1994-07-18
- 实施
- 1995-07-01
本标准按HG/T 2395《橡胶机械产品质量分等通则》规定了橡胶单螺杆挤出机的产品质量分等考核指标和评定方法。 本标准适用于热喂料、冷喂料(包括排气式冷喂料)橡胶单螺杆挤出机产品质量等级的考核评定。 本标准不适用于销钉式冷喂料挤出机和滤胶机产品质量等级评定。
Rubber single-screw extruder product quality classification and inspection rules
- ICS
- 83.200
- CCS
- G95
- 发布
- 1994-04-08
- 实施
- 1994-10-01
本标准HG/T 2395《橡胶机械产品质量分等通则》规定了轮胎定型硫化机产品质量分等、考核指标和评定方法。 本标准适用于GB/T 13579中规定的硫化机产品质量等级的考核评定。
Tire shaping and vulcanizing machine product quality classification and inspection rules
- ICS
- 83.200
- CCS
- G95
- 发布
- 1994-04-08
- 实施
- 1994-10-01
本标准规定了立式切胶机的型号与基本参数、技术要求、安全与环保要求、试验方法和检验规则等。 本标准适用于单刀立式切胶机。
Vertical Glue Cutting Machine
- ICS
- 83.200
- CCS
- G95
- 发布
- 1994-04-08
- 实施
- 1994-10-01
RUBBER AND PLASTICS MACHINERY. COMPRESSION AND TRANSFER MOULDING PRESSES. SAFETY REQUIREMENTS FOR THE DESIGN. (EUROPEAN STANDARD EN 289).
- ICS
- 83.200
- CCS
- G95
- 发布
- 1994-04
- 实施
- 1994-03-20
Tools for moulding; sprue bushes; dimensions
- ICS
- 83.200
- CCS
- J62
- 发布
- 1993-11
- 实施
