85.060 纸和纸板 标准查询与下载

T/ZZB 0828-2018 纸基壁纸原纸

本标准规定了纸基壁纸原纸的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存和质量与服务承诺。 本标准适用于加工制作纸基壁纸用原纸。

Base paper of paper-backed vinyl wallpaper

T/ZZB 0823-2018 美纹纸

本标准规定了美纹纸的基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于木浆经碎浆、磨浆、抄纸等工序制成美纹原纸后经浸渍用于制作美纹纸胶带用纸。

Crepe paper for masking tape

T/ZZB 0760-2018 耐晒纯无纺纸壁纸

本标准规定了耐晒纯无纺纸壁纸的产品类型、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺等内容。 本标准适用于使用纯无纺纸为主要原料加工制作而成具有耐晒功能的壁纸。

Lightfast pure nonwoven wallpaper

T/ZZB 0763-2018 字典纸

本标准规定了字典纸的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、包装、标志、运输和贮存及质量承诺。 本标准适用于供轮转和平版印刷的工具书、科教刊物等高级印刷用纸。

Bible paper

QB/T 5296-2018 擦拭纸巾

wipes

QB/T 5297-2018 干燥剂包装袋用纸

Desiccant packaging bag paper

QB/T 1312-2018 砂纸原纸

Sandpaper base paper

T/ZZB 0590-2018 电解电容器纸

本标准规定了电解电容器纸的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本标准适用于电解电容器中隔离电极和吸附电解液的纸。

Electrolytic capacitor paper

DIN ISO 11093-8:2018 纸和纸板 芯材测试 第8部分：通过实验模态分析确定固有频率和弯曲模量（ISO 11093-8:2017）

This document specifies a method for the determination of the flexural modulus by using experimentally measured natural frequencies in the free-free mode of transverse vibration of cylindrical paper and board cores, which meet the following criteria:- internal diameter: 50 mm to 350 mm;- minimum wall thickness: 0,02 × internal diameter or not less than 2,0 mm;minimum length of core: 8 × internal diameter.NOTE For the determination of the flexural modulus by the three-point method, see ISO 11093-7.

Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2017)

T/CSSGA 1009-2018 文具纸胶带

本标准规定了文具纸胶带的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存等。 本标准适用于以纸为基材，具有粘贴装饰、图形创作功能的文具纸胶带。

Paper tape for stationery

T/CSSGA 1010-2018 事贴

本标准规定了事贴的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于具有粘贴功能、记录用途、便于携带的便签类用品。

Removable self-stick notes

T/CADBM 6-2018 墙纸

本标准规定了墙纸的产品分类、要求、试验方法、检验规则与标志、包装、运输、贮存。 本标准适用于纯纸墙纸、纯无纺纸墙纸、纸基PVC墙纸和无纺纸基PVC墙纸，其它类型产品可参照执行。  

wallpaper

T/ZZB 0316-2018 超级电容器隔膜纸

本标准规定了超级电容器隔膜纸的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本标准适用于超级电容器隔膜纸的制造。

Separator paper for super capacitor

BS ISO 20494:2017 纸 一般图形应用的稳定性要求

1   Scope This document specifies the requirements for the stability of paper for general graphic applications . It is applicable to all types of uncoated, coated and filled papers. NOTE For information on International Standards on paper permanence (see ISO 9706), archival paper permanence and durability (see ISO 11108) and on paper stability for general graphic applications (see ISO 20494), refer to Annex C.

Paper. Requirements for stability for general graphic applications

BS EN ISO 287:2017 纸和纸板 水分含量的测定很多 烘干法

1   Scope This document specifies an oven-drying method for the determination of the moisture content of a lot of paper and board. The procedure in Clause 8, describing how the test pieces are drawn from the lot, is performed at the time of sampling. This document is applicable to every type of lot of paper and board, including corrugated board and solid board, provided that the paper or board does not contain any substances, other than water, that are volatile at the temperature specified in this document. NOTE For determination of the dry matter content of a sample of paper or board, e.g. for calculation of the dry mass of the sample, ISO 638 [ 1 ] can be used.

Paper and board. Determination of moisture content of a lot. Oven-drying method

GOST R 58079-2018 印刷设备用热敏纸. 通用规范

Thermal-sensitive paper for printing devices. General specifications

GOST R 58106-2018 办公设备用纸. 规格

Paper for office equipment. Specifications

GOST R 58080-2018 用于吸收卫生纸制品的组合物纤维素材料. 规格

Composition cellulose material for absorbing sanitary-hygiene paper products. Specifications

BS ISO 5629:2017 纸和纸板 弯曲刚度的测定 共振法

1   Scope This document specifies a method for the determination of bending stiffness using the resonance method. This method gives only a single result for each test piece tested, although in general, bending stiffness values may depend on which surface of the material forms the inner surface of the arc resulting from bending forces. The bending stiffness of a very wide range of papers and boards can be measured using this method. However, for some materials, such as those listed below, the measured numerical values will not be strictly identical with bending stiffness as defined in 3.1: a) multi-ply papers and boards in which the component plies can move separately during a test; b) papers and boards with appreciable curl, especially if the axis of the curl is in the long direction of the test piece; c) some soft papers with grammage below about 40 g/m 2 . This method is not applicable to corrugated boards.

Paper and board. Determination of bending stiffness. Resonance method

KS M ISO 5636-1-2017 纸和纸板 透气度的测定（中等范围） 第1部分：通用方法

Paper and board－Determination of air permeance(medium range)－Part 1：General method