85.080.20 标准查询与下载

NF Q34-030-9:2005 薄纸和薄纸制品.第6部分:钢球式顶破强力的测定

Tissue paper and tissue products - Part 9 : determination of ball burst strength.

DIN EN ISO 12625-3:2005 薄纸和薄纸制品.第3部分:厚度、膨松厚度和表观体密度的测定

This part of ISO 12625 specifies a test method for the determination of thickness and bulking thickness and the calculation of apparent bulk density of tissue paper and tissue products under a pressure of 2,0 kPa. Note: This part of ISO 12625 has been developed to provide a consistent test method for the determination of thickness and density of tissue paper and tissue products. Corresponding test methods for paper and board in general are covered in ISO 534.#,,#

Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density (ISO 12625-3:2005); German version EN ISO 12625-3:2005

DIN 54540-9:2005 纸试验.薄页纸和薄纸制品.第9部分:水分含量的测定

This standard specifies a test method for the determination of the moisture content of sanitary papers.

Testing of paper - Tissue paper and tissue products - Part 9: Determination of moisture content

DIN EN ISO 12625-4:2005 薄纸和薄纸制品.第4部分:拉伸强度、断裂处强度和拉伸能量吸收的测定

Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption (ISO 12625-4:2005); German version EN ISO 12625-4:2005

DIN EN ISO 12625-9:2005 薄纸和薄纸制品.第9部分:钢球式顶破强力的测定

This part of ISO 12625 specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products.

Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2005); German version EN ISO 12625-9:2005

DIN 54540-6:2005 纸试验.薄页纸和薄纸制品.第6部分:叠层吸水率的测定

This standard specifies a test method for the determination of water absorption of stacks of sanitary papers.

Testing of paper - Tissue paper and tissue products - Part 6: Determination of water absorption of stacks

DIN 54540-5:2005 纸试验.薄页纸和薄纸制品.第5部分:吸水后伸长率的测定

This standard specifies a test method for the determination of elongation after water absorption of sanitary papers.

Testing of paper - Tissue paper and tissue products - Part 5: Determination of elongation after water absorption

DIN EN ISO 12625-5:2005 薄纸和薄纸制品.第5部分:湿拉伸强度的测定

This part of ISO 12625 specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.#,,#

Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2005); German version EN ISO 12625-5:2005

DS/EN ISO 12625-5:2005 薄纸和薄纸制品《第5部分：湿拉伸强度的测定》

This part of ISO 12625 specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.Currently, two types of tensile-strength testers are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This part of ISO 12625 applies for both. For vertical tensile-strength testers, a device which is held in the lower grip of the tensile-strength tester, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength testers, the soaking

Tissue paper and tissue products – Part 5: Determination of wet tensile strength

DS/EN ISO 12625-3:2005 薄纸和薄纸制品 第3部分：厚度、膨松厚度和表观松密度的测定

This part of ISO 12625 specifies a test method for the determination of thickness and bulking thickness, and the calculation of apparent bulk density, of tissue paper and tissue products under a pressure of 2,0 kPa.NOTE This part of ISO 12625 has been developed to provide a consistent test method for the determination of thickness and density of tissue paper and tissue products. Corresponding test methods for paper and board in general are covered in ISO 534.It is expressly stated that the detection of impurities and contraries in tissue paper and tissue products should be applied according to ISO 15755.For the determination of moisture content in tissue pa

Tissue paper and tissue products – Part 3: Determination of thickness, bulking thickness and apparent bulk density

DS/EN ISO 12625-4:2005 薄纸和薄纸制品 第4部分：拉伸强度、断裂伸长率和拉伸能量吸收的测定

This part of ISO 12625 specifies a test method for the determination of the tensile strength, stretch at break and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus operating with a constant rate of elongation.It also specifies the method of calculating the tensile index and the tensile energy absorption index.It is expressly stated that the detection of impurities and contraries in tissue paper and tissue products should be applied according to ISO 15755.For the determination of moisture content in tissue paper and tissue products, ISO 287 should be applied.

Tissue paper and tissue products – Part 4: Determination of tensile strength, stretch at break and tensile energy absorption

BS EN ISO 12625-9:2005 薄纸和薄纸制品.钢球式顶破强力的测定

ISO 12625-9:2005 specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products.

Tissue paper and tissue products - Determination of ball burst strength

BS EN ISO 12625-4:2005 薄纸和薄纸制品.拉伸强度、断裂伸长和拉伸能量吸收的测定

ISO 12625-4:2005 specifies a test method for the determination of the tensile strength, stretch at break and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus operating with a constant rate of elongation. It also specifies the method of calculating the tensile index and the tensile energy absorption index.

Tissue paper and tissue products - Determination of tensile strength, stretch at break and tensile energy absorption

NF Q34-030-4:2005 薄纸和薄纸制品.第4部分:拉伸强度、断裂强度和拉伸能量吸收的测定

Tissue paper and tissue products - Part 4 : determination of tensile strength, stretch at break and tensile energy absorption.

NF Q34-030-5:2005 薄纸和薄纸制品.第5部分:湿拉伸强度的测定

Tissue paper and tissue products - Part 5 : determination of wet tensile strength.

NF Q34-030-3:2005 薄纸和薄纸制品.第3部分:厚度、膨松厚度和表观体密度的测定

Tissue paper and tissue products - Part 3 : determination of thickness, bulking thickness and apparent bulk density.

ISO 12625-9:2005 薄纸和薄纸制品.第9部分:耐破度的测定

This part of ISO 12625 specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products. It is expressly stated that the detection of impurities and contraries in tissue paper and tissue products should be applied according to ISO 15755. For the determination of moisture content in tissue paper and tissue products, ISO 287 should be applied.

Tissue paper and tissue products - Part 9: Determination of ball burst strength

DIN EN ISO 12625-6:2005 薄页纸和薄纸产品.第6部分:克数测定

Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2005); German version EN ISO 12625-6:2005

DS/EN ISO 12625-6:2005 薄纸和薄纸制品 第6部分：克重的测定

This part of a series of standards specifies a test method for the determination of grammage of tissue paper and tissue products.

Tissue paper and tissue products - Part 6: Determination of grammage

BS EN ISO 12625-6:2005 薄纸和薄纸制品.克数测定

ISO 12625-6:2005 specifies a test method for the determination of grammage of tissue paper and tissue products. Grammage may be measured by determining the mass of a test piece or test pieces of tissue paper or tissue products cut to specified dimensions, or by determining the mass and area of a specified number of units of finished tissue products.

Tissue paper and tissue products - Determination of grammage