85.080.20 标准查询与下载
共找到 95 条与 相关的标准，共 7 页
This part of ISO 12625 specifies a test method for the determination of grammage of tissue paper and tissue products. Grammage may be measured by determining the mass of a test piece or test pieces of tissue paper or tissue products cut to specified dimensions, or by determining the mass and area of a specified number of units of finished tissue products. It is expressly stated that the detection of impurities and contraries in tissue paper and tissue products should be applied according to ISO 15755. For the determination of moisture content in tissue paper and tissue products, ISO 287 should be applied.
Tissue paper and tissue products - Part 6: Determination of grammage
- ICS
- 85.080.20
- CCS
- Y30
- 发布
- 2005-02
- 实施
Tissue paper and tissue products. Part 3 : determination of thickness, bulking thickness and apparent bulk density.
- ICS
- 85.080.20
- CCS
- Y32
- 发布
- 1999-08-01
- 实施
- 1999-08-20
Tissue paper and tissue products. Part 5 : determination of wet tensile strength.
- ICS
- 85.080.20
- CCS
- Y32
- 发布
- 1999-08-01
- 实施
- 1999-08-20
Tissue paper and tissue products. Part 6 : determination of grammage.
- ICS
- 85.080.20
- CCS
- Y32
- 发布
- 1999-08-01
- 实施
- 1999-08-20
Tissue paper and tissue products. Part 4 : determination of tensile strength, stretch at break and tensile energy absorption.
- ICS
- 85.080.20
- CCS
- Y32
- 发布
- 1999-08-01
- 实施
- 1999-08-20
This part of EN 12625 specifies a test method forThedetxxmination of thickness, bullring thickness andapparent bulk density of tissue papezs and tissueproducts when under a specified pressure of 2,0 kPa.NOTE This Europ}n Standard has been developed to provide aconsistent test metLodof tissue paper and tissuepropertiesmethodsfor paper and board in
Tissue Paper and Tissue Products - Part 3: Determination of Thickness, Bulking Thickness and Apparent Bulk Density
- ICS
- 85.080.20
- CCS
- 发布
- 1999-01-01
- 实施
This part of EN 12625 specials a text method forThe determinations of the wet tensile strength of tissure paper and tissure products after wetting using a tensile testing apparatus operating with a constant rate of elongation.
Tissue Paper and Tissue Products - Part 5: Determination of Wet Tensile Strength
- ICS
- 85.080.20
- CCS
- 发布
- 1999-01-01
- 实施
Minimum size and performance requirements for towelling designed primarily for the non-domestic market.
Specification for single-ply wet-creped paper towelling
- ICS
- 85.080.20
- CCS
- Y33
- 发布
- 1992-05-01
- 实施
- 1992-05-01
Covers physical and dimensional requirements of 3 grades of cr ped toilet paper in rolls. Includes packing, marking, sampling, and methods of testing of grammage, tensile strength, water-absorption rate, softness, brightness and pH value.
Toilet paper
- ICS
- 85.080.20
- CCS
- 发布
- 1980-11-05
- 实施
- 1980-11-05
Covers 2 types of paper serviette, viz. a soft absorbent dinner napkin and non-absorbent napkin for handeling foodstuffs. Specifies general requirements, basis mass, tensile strength, brightness, softness, rate of absorption, dimensions and workmanship.
Paper serviettes
- ICS
- 85.080.20
- CCS
- 发布
- 1971-03-01
- 实施
- 1971-03-01
ISO 12625-5:2016 specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation. Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device which is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the clamps. In cases where impurities and contraries have to be determined, ISO 15755[6] applies for these detections in tissue paper and tissue products.
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO/FDIS 12625-5:2024)
- ICS
- 85.080.20
- CCS
- 发布
- 实施
ISO 12625-5:2016 specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation. Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device which is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the clamps. In cases where impurities and contraries have to be determined, ISO 15755[6] applies for these detections in tissue paper and tissue products.
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO/DIS 12625-5:2023)
- ICS
- 85.080.20
- CCS
- 发布
- 实施
ISO 12625-16:2015 specifies the testing procedures for the instrumental determination of the opacity of tissue paper or tissue products by diffuse reflectance using a paper backing. ISO 12625-16:2015 contains specific instructions for the preparation of test pieces of single-ply and multi-ply products, where special preparation/procedures might be necessary. It can be used to determine the opacity of tissue paper and tissue products containing fluorescent whitening agents, provided the UV content of the radiation incident on the test piece has been adjusted to conform to that in the CIE illuminant C using a fluorescent reference standard provided by an authorized laboratory as described in ISO 2470-1. ISO 12625-16:2015 is not applicable to coloured tissue paper and tissue products which incorporate fluorescent dyes or pigments.
Tissue paper and tissue products - Part 16: Determination of optical properties - Diffuse reflectance method for opacity (paper backing) (ISO/FDIS 12625-16:2024)
- ICS
- 85.080.20
- CCS
- 发布
- 实施
ISO 12625-12:2010 specifies a test method for the determination of the tensile strength of perforated lines of tissue paper. It uses a tensile-testing apparatus operating with a constant rate of elongation. This method is only used for measuring machine-direction tensile strength, that is for cross-direction perforations on tissue paper. The calculation of perforation efficiency is also specified in ISO 12625-12:2010.
Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency (ISO/FDIS 12625-12:2023)
- ICS
- 85.080.20
- CCS
- 发布
- 实施
