87.020 涂料涂覆工艺 标准查询与下载

LST EN ISO 11125-1:2002 涂装油漆和相关产品前钢基材的准备 金属喷砂清理磨料的试验方法 第1部分：取样（ISO 11125-1:1993）

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993)

LST EN ISO 11125-2:2002 涂装油漆和相关产品前钢基材的准备 金属喷砂清理磨料的试验方法 第2部分：粒度分布的测定（ISO 11125-2:1993）

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993)

KS M ISO 8502-9-2002(2017) 涂料和有关产品使用前钢基体的制备表面清洁度评定试验第9部分:水溶性盐电导测定的现场方法

Preparation of steel substrates before application of paints and related products－Tests for the assessment of surface cleanliness－Part 9：Field method for the conductometric determination of water-solu

KS M ISO 8502-9:2002 涂料和有关产品使用前钢衬底的制备.表面清洁度评定试验.第9部分:水溶性盐电导测定的现场方法

이 규격은 표면 조정 전후에 철강의 표면에 있는 다양한 수용성 염류(주로 염화물과 황화물)

Preparation of steel substrates before application of paints and related products－Tests for the assessment of surface cleanliness－Part 9：Field method for the conductometric determination of water-soluble salts

KS M ISO 8502-5-2002(2017) 涂装前钢材表面处理表面清洁度评定试验第5部分:涂装前钢材表面氯化物的测定（离子检测管法）

Preparation of steel substrates before application of paints and related products－Tests for the assessment of surface cleanliness－Part 5：Measurement of chloride on steel surfaces prepared for painting

KS M ISO 8502-5:2002 涂料和有关产品使用前钢衬底的制备.表面清洁度评定试验.第5部分:涂覆前已处理钢表面上氯化物的测量(离子检测管法)

이 규격은 ISO 8502 중 특수 감지관을 사용하여 염화물 이온을 측정하는 현장 시험법에

Preparation of steel substrates before application of paints and related products－Tests for the assessment of surface cleanliness－Part 5：Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

LST EN ISO 12944-6:2001 油漆和清漆 通过防护漆系统对钢结构的腐蚀防护 第6部分：实验室性能测试方法（ISO 12944-6:1998）

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:1998)

ISO 15741:2001 色漆和清漆 海上和近海的非腐蚀气体钢管内侧的减小摩擦涂层

This International Standard specifies requirements and methods of test for liquid epoxy paints and internal coatings of such paints in steel pipes and fittings for the conveyance of non-corrosive gas. It also deals with the application of the paint. Other paints or paint systems are not excluded provided they comply with the requirements given in this International Standard. The coating consists of one layer, which is normally shop-applied on blast-cleaned steel by airless spray or other suitable spraying techniques. The applied and cured paint film must be smooth to give the desired reduction in friction. Brush application is only used for small repair jobs.

Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases

ASTM D610-95 评定涂漆钢表面锈蚀程度的标准试验方法

1.1 This test method covers the evaluation of the degree of rusting on painted steel surfaces. The visual examples which depict the percentage of rusting given in the written specifications form part of the standard. In the event of a dispute, the written definition prevails. These visual examples were developed in cooperation with SSPC: The Society for Protective Coatings to further standardization of methods.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces

DS/EN ISO 12944-8:2001 油漆和清漆 保护漆系统对钢结构的腐蚀保护 第8部分：新工作和维护规范的制定

This part of ISO 12944 deals with the development of specifications for corrosion protection of steel structures, using protective paint systems. It relates to new work and maintenance in the workshop or on site and is also applicable to the corrosion protection af built-in components. This part of ISO 12944 concerns the corrosion protection of steel structures exposed to different corrosion stresses by environments such as indoors, open-air and immersion in water or burial in soil, as well as special stresses, for example due to medium or high temperatures. The need for different durability ranges is considered.

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance

DS/EN ISO 12944-6:2001 油漆和清漆 防护漆系统对钢结构的腐蚀保护 第6部分：实验室性能测试方法

This part of ISO 12944 specifies laboratory test methods and test conditions for the assessment of paint systems for the corrosion protection of steel structures. The test results are to be considered as an aid in the selection of suitable paint systems and not as exact information for determining durabililty. This part of ISO 12944 covers protective paint systems designed for application to uncoated steel, hot-dip-galvanized steel and steel surfaces with thermally sprayed zinc coatings.

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods

DS/EN ISO 12944-7:2001 油漆和清漆 通过防护漆系统对钢结构的腐蚀保护 第7部分：油漆工作的执行和监督

This part of ISO 12944 deals with the execution and supervision of paint work on steel structures in the workshop or on site.

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work

DS/EN ISO 12944-1:2001 油漆和清漆 通过防护漆系统对钢结构的腐蚀防护 第1部分：概述

ISO 12944 deals with the corrosion protection of steel structures by protective paint systems. ISO 12944 covers only the corrosion-protective function of paint systems. Other protective functions, like the protection against: - microorganisms (marine fouling, bacteria, fungi, etc.); - chemicals (acids, alkalis, organic solvents, gases, etc.); - mechanical action (abrasion, etc.); - fire are not covered by this standard

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction

DS/EN ISO 12944-3:2001 油漆和清漆 通过防护涂料系统对钢结构的腐蚀保护 第3部分：设计考虑

This part of ISO 12944 deals with the basic criteria for the design of steel structures to be coated by protective paint systems in order to avoid premature corrosion and degradation of the coating or the structure. It gives examples of appropriate and unappropriate design, indicating how problems of application, inspection and maintenance of paint systems can be avoided. Design measures which facilitate handling and transport of the steel structures are also considered.

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations

DS/EN ISO 12944-2:2001 油漆和清漆 通过防护涂料系统对钢结构的腐蚀防护 第2部分：环境分类

This part of ISO 12944 deals with the classification of the principal environments to which steel structures are exposed, and the corrosivity of these environments. It defines atmospheric-corrosivity categories, based on mass loss (or thickness loss) by standard specimens, and describes typical natural atmospheric environments to which steel structures are exposed, giving advice on the estimation of the corrosivity.

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments

ASTM D6577-00 工业防护涂层试验的标准指南

1.1 This guide covers the selection and use of test methods and procedures for testing industrial protective coatings. Selection of the standards to be followed must be governed by experience and the requirements in each individual case, together with agreement between the supplier and the user.1.2 This guide covers the testing of liquid coatings as applied on substrate by brushing, rolling, spraying, or other means appropriate to the coating and circumstance.Note 1--The term "industrial protective coating" as used in this guide is described in the scope of Subcommittee D01.46 as "paints applied to substrates on-site of structures and buildings, especially where subject to corrosive environments, as industrial, urban, and marine environments."Note 2--Guides for testing other coating types, such as Guides D4712, D5146, D5324 or for surface preparation, coating application, such as Guide D3276, are available and should be used when it is applicable.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Testing Industrial Protective Coatings

NF P74-202-1/A2:2000 DTU 59.2.建筑工程.基于水凝粘合剂的混凝土和灰浆厚的塑料光饰(TPF)工程.第1部分:技术规范

DTU 59.2 - Building works - Work of thick plastic finisches (TPF) over concrete or plaster based on hydraulic binders - Part 1 : technical specifications.

NF P74-203-1/A1:2000 DTU 59.3.建筑工程.地板涂漆.第1部分:技术规范

DTU 59.3 - Building works - Paint work for floor - Part 1 : technical specifications.

NF P74-201-2/A1:2000 DTU 59.1.涂漆.专门市场.建筑物涂漆工程.第2部分:特别规范手册

DTU 59.1 - Painting - Private market - Building painting works - Part 2 : particular specifications book.

NF P74-201-1/A1:2000 DTU 59.1.涂漆.建筑物涂漆作业.第1部分:技术规范手册

DTU 59.1 - Painting - Building painting work - Part 1 : technical clauses book.