87.060.20 涂料粘合剂 标准查询与下载

EN ISO 4625-1:2006 色漆和清漆用粘合剂.软化点的测定.第1部分:环-球法

This part of ISO 4625 specifies methods of determining the softening point of resin (including rosin) and similar materials by means of the ring-and-ball apparatus.Both manual and automatic methods are specified.

Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004)

EN ISO 4625-2:2006 色漆和清漆用粘合剂.软化点的测定.第2部分:环窝接合法 ISO 4625-2-2004

This part of ISO 4625 specifies a method for determining the softening point of resins(including rosin) by means of a cup-and-ball apparatus and can,under user-defined conditions,give results comparable to those obtained using the ring-and-ball method(ISO 4625-1).

Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004)

ISO 150:2006 色漆和清漆用生的、精制的和熟的亚麻仁油.规范和试验方法

This International Standard specifies the requirements and the corresponding methods of test for raw, refined and boiled linseed oils for paints and varnishes.

Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test

KS M ISO 4630-2005 油漆和清漆用粘合剂 用加德纳色标估算透明液体的颜色

Binder for paints and varnishes－Estimation of colour of clear liquids by the Gardner colour scales

KS M ISO 9020:2005 色漆和清漆用粘合剂氨基树脂游离甲醛含量的测定亚硫酸钠滴定法

Binders for paints and varnishes－Determination of free－formaldehydecontent of amino resins－Sodium sulfite titrimetric method

KS M ISO 4630:2005 色漆和清漆用粘合剂用加德纳色标评定透明液体的颜色

Binder for paints and varnishes－Estimation of colour of clear liquids by the Gardner colour scales

DS/EN ISO 16805:2005 油漆和清漆用粘合剂 玻璃化转变温度的测定

This standad specifies a procedure to be used for sample preparation for the determination of the glass transition temperature of binders for paints and varnishes, including coating powders, by differential colorimetry scanning (DSC).

Binders for paints and varnishes - Determination of glass transition temperature

DIN 55940:2005 色漆和清漆用粘合剂.脱水蓖麻油.要求和试验方法

The document specifies requirements for dehydrated castor oil used in paints, varnishes and similar coating materials.#,,#

Binders for paints and varnishes - Dehydrated castor oil - Requirements and methods of test

DIN EN ISO 16805:2005 色漆和清漆用粘合剂.玻璃化转变温度的测定

Specification of a procedure for sample preparation for the determination of the glass transition temperature of binders for paints and varnishes, including coating powders, by differential colorimetry scanning (DSC).

Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003); German version EN ISO 16805:2005

EN ISO 16805:2005 色漆和清漆用粘合剂.玻璃化转变温度的测定

Diese Internationale Norm legt das Verfahren zum Vorbereiten der Probe für die Bestimmung der Glasübergangstemperatur von Bindemitteln für Beschichtungsstoffe sowie Pulverlacken durch Differentialscanningkalorimetrie (DSC) fest. Das für die Bestimmung der Glasübergangstemperatur anzuwendende Verfahren ist in ISO 11357-2 festgelegt.

Binders for paints and varnishes Determination of glass transition temperature

DS/EN ISO 6271-2:2005 透明液体 用铂钴色标估计颜色 第2部分：分光光度法

This standard specifies a spectrophotometric method for estimating the colour, in Pt-Co units, of clear liquids. It is applicable to clear liquids having a colour characteristic similar to those of the reference platinum-cobalt scale specified in EN ISO 6271-1.

Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method

DS/EN ISO 4630-1:2005 透明液体 用加德纳色标估计颜色 第1部分：视觉法

This standard specifies a method for estimating, by means of Gardner colour scale, the colour of clear, yellow/brown, liquid products using colour measuring instruments. The result smay be invalid if other products are used.

Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method

DS/EN ISO 4630-2:2005 透明液体 用加德纳色标估计颜色 第2部分：分光光度法

This standard specifies a method for estimating, by means of the Gardner colour scale, the colour of the clear, yellow/brown, liquid products using colour measuring instruments.

Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method

DS/EN ISO 6271-1:2005 透明液体 用铂钴色标估计颜色 第1部分：视觉法

This standard specifies a method for estimating the colour, in Pt-Co units, of clear liquids. It is applicable to clear liquids having colour characteristics similar to those of the reference platinum-cobalt scale.

Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method

BS EN ISO 4625-2:2005 涂料和清漆用粘合剂.软化点的测定.环-球接合法

This part of ISO 4625 specifies a method for determining the softening point of resins (including rosin) by means of a cup-and-ball apparatus and can, under user-defined conditions, give results comparable to those obtained using the ring-and-ball method (ISO 4625-1).

Binders for paint and varnishes - Determination of softening point - Cup-and-ball method

BS EN ISO 4625-2:2006 油漆和清漆的粘合剂 软化点的测定杯球法

Binders for paint and varnishes. Determination of softening point - Cup-and-ball method

BS EN ISO 4625-1:2005 涂料和清漆用粘合剂.软化点的测定.环-球法

This part of ISO 4625 specifies methods of determining the softening point of resins (including rosin) and similar materials by means of the ring-and-ball apparatus. Both manual and automatic methods are specified.

Binders for paint and varnishes - Determination of softening point - Ring-and-ball method

ASTM D464-05(2010) 松脂油产品包括妥尔油及其相关产品的皂化值的标准试验方法

These test methods are designed to broaden the scope of the earlier editions of the test method by the inclusion of tall oil and tall oil derived products as test materials and is referenced in Test Methods D803. The saponification number is an important property of tall oil and the products obtained by the fractionation of tall oil. It is the test method widely used to determine the total acid content, both free and combined, of these products. The potentiometric test method should be used when the most reproducible results are required.1.1 These test methods cover the determination of the saponification number of tall oil and products obtained by the fractionation of tall oil such as rosin, fatty acids and distilled tall oil as defined in Terminology D804. These test methods are also applicable to gum and wood rosin. Two test methods are covered as follows: 1.1.1 Test method using a potentiometric method, and 1.1.2 Test method using an internal indicator method. 1.2 The potentiometric method is suitable for use with both light- and dark-colored test samples. It should be considered the referee method. The internal indicator method is suitable for use only with light- and medium-colored test samples. It should be considered the alternate method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products

ASTM D465-05(2010) 松脂制品包括妥尔油及其相关产品酸值的标准试验

These test methods are designed to broaden the scope of the earlier editions of the test method by the inclusion of tall oil and tall oil derived products as test materials and will be referenced in Test Methods D803. The acid number is an important property of naval stores products, tall oil, and the products obtained by the fractionation of tall oil. It is the test method widely used to determine the total free acid content of these products. The potentiometric test method should be used when the most reproducible results are required.1.1 These test methods are intended for determining the acid number of naval store products as defined in Terminology D804 including tall oil products, wood and gum rosin, and other related materials. These test methods may not be applicable to all modified rosin products. Two test methods are covered, as follows: 1.1.1 Potentiometric method (referee), and 1.1.2 Internal indicator method (alternate). 1.2 The potentiometric method is suitable for use with both light- and dark-colored products. It should be considered the referee method. The internal indicator method is suitable for use only with light- and medium-colored products with a Gardner color of less than 12. It should be considered the alternate method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products

LST EN ISO 15880:2004 油漆、清漆和粘合剂 水性涂料和粘合剂 MEQ 值的测定（ISO 15880:2000）

Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000)