87.080 墨水、油墨 标准查询与下载

TIS 2363.4-2007 印刷技术.四色印刷油墨的颜色和透明度.第4部分:网板印刷

Graphic technology.colour and transparency of printing ink sets for four.colour printing.part 4: screen printing

QB 2930.1-2008 油墨中某些有害元素的限量及其测定方法.第1部分:可溶性元素

本部分规定了油墨中可溶性元素（锑、砷、钡、镉、铬、铅、汞、硒）的最大限量要求，样品制备和测定方法。 本部分适用于油墨产品，油墨印刷制品也可参照使用。

Limits and determination method of certain toxic elements in printing ink.Part 1:Soluble elements

QB 2930.2-2008 油墨中某些有害元素的限量及其测定方法.第2部分:铅，汞，镉，六价铬

本部分规定了油墨中铅，汞，镉，六价铬的限量要求,样品制备和测定方法. 本部分适用于油墨产品,油墨印刷制品也可参照使用.

Limits and determination method of certain toxic elements in printing ink.Part 2:lead、mercury、cadmium、chromium(Ⅵ)

QB/T 2929-2008 溶剂型油墨溶剂残留量限量及其测定方法

本标准规定了溶剂型油墨的溶剂残留量限量及其测定方法。 本标准适用于溶剂型油墨产品。

Limits and determination method of residual solvent in solvent based printing ink

BS ISO 2846-2:2007 图形技术 四色印刷油墨组的颜色和透明度 冷固胶印

BS ISO 2846-2:2007 Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Coldset offset lithographic printing BS ISO 2846-2 specifies the colour and transparency to be produced by inks intended for four-colour coldset web offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure conformance. BS ISO 2846-2 does not apply to fluorescent inks and does not specify pigments (or spectral reflectance) so as not to preclude the use of future suitable pigment combinations and still claim compliance with its colorimetric requirements. Contents of BS ISO 2846-2: Foreword Introduction 1 Scope 2 Normative references 3 Terms and definitions 4 Test method 4.1 Principle 4.2 Test print preparation 5 Requirements for colour, transparency and ink film thickness range 5.1 Colour 5.2 Transparency characteristics 5.3 Ink film thickness range Annex A (normative) Reference substrate Annex B (informative) Detailed explanation of testing including examples Annex C (informative) Spectral data Bibliography  

Graphic technology. Colour and transparency of printing ink sets for four-colour printing - Coldset offset lithographic printing

BS ISO 2846-2:2008 印刷技术.四色印刷油墨的颜色和透明度.冷固型油墨胶印

This part of ISO 2846 specifies the colour and transparency to be produced by inks intended for four-colour coldset web offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure conformance. This part of ISO 2846 is not applicable to fluorescent inks and does not specify pigments (or spectral reflectance) so as not to preclude the use of future suitable pigment combinations and still claim compliance with its colorimetric requirements.

Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Coldset offset lithographic printing

QB/T 2063-2007 碳素墨水

本标准规定了碳素墨水的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于自来水和蘸水钢笔做文件记录用碳素墨水。

Carbonic ink

QB/T 1946-2007 圆珠笔用油墨

本标准规定了圆珠笔用油墨的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于圆珠笔用油墨（以下简称“油墨”）。

Ball point pen ink

ISO 2846-2:2007 印刷技术.四色印刷油墨的颜色和透明度.第2部分:冷固型油墨胶印

This part of ISO 2846 specifies the colour and transparency to be produced by inks intended for four-colour coldset web offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure conformance. This part of ISO 2846 is not applicable to fluorescent inks and does not specify pigments (or spectral reflectance) so as not to preclude the use of future suitable pigment combinations and still claim compliance with its colorimetric requirements.

Graphic technology - Colour and transparency of printing ink sets for four-colour printing - Part 2: Coldset offset lithographic printing

ISO 2834-2:2007 印刷技术.试验印件的实验室制备.第2部分:液态印刷油墨

This part of ISO 2834 specifies a test method for preparation of test prints produced with liquid water-based or solvent-based printing inks as used in flexography and gravure printing. These test prints are intended primarily for optical tests, such as colorimetry, transparency and reflection density as described in ISO 2846-3 and ISO 2846-5. They can also be used for testing gloss, light fastness and the chemical, physical and mechanical resistance to mechanical and chemical attack regarding either printing ink and/or substrate. Flexographic inks with higher viscosity, such as those cured by radiation are also covered. This part of ISO 2834 is not applicable to inks for ink jet printing.

Graphic technology - Laboratory preparation test prints - Part 2: Liquid printing inks

HJ/T 371-2007 环境标志产品技术要求 凹印油墨和柔印油墨

本标准规定了凹印油墨和柔印油墨环境标志产品的术语和定义、基本要求、技术内容和检验方法。 本标准适用于溶剂基凹印油墨、溶剂基柔印油墨、水基凹印油墨、水基柔印油墨以及凹印和柔印油墨所使用的溶剂。

Technical requirement for environmental labeling products Gravure and flexible printing ink

HJ/T 370-2007 环境标志产品技术要求 胶印油墨

本标准规定了胶印油墨环境标志产品的术语和定义、基本要求、技术内容和检验方法。 本标准适用于除辐射固化油墨之外的胶印油墨。

Technical requirement for environmental labeling products Offset printing ink

GSO ISO 2836:2007 印刷技术 印刷品和印刷油墨 评估印刷品对各种因素的抵抗力

This International Standard specifies methods of assessing the resistance of printed materials to liquid and solid agents, solvents, varnishes, and acids. It applies to printing on all substrates by all of the traditional printing processes and digital imaging processes such as ink-jet, electrophotography, etc. using marking materials appropriate to the printing process used.

Graphic technology- Prints and printing inks — Assessment of resistance of prints to various agents

GSO ISO 12040:2007 印刷技术 印刷品和印刷油墨 使用氙弧光评估光速

This International Standard specifies a method for assessing the light fastness of prints and printing inks, by giving - the general test requirements for prints; - the special test requirements for inks. This International Standard applies to all print substrates such as paper, board, metals (thin metal sheets and plate) and plastic films and to all printing processes.

Graphic Technology – Prints and Printing Inks – Assessment of light Fastness Using Filtered Xenon Arc Light

GSO ISO 12644:2007 印刷技术 通过使粘度计的轴落下来测定墨浆和载体材料的粘度特性

This International Standard specifies the procedure for determining the viscosity ad yield value of paste inks and vehicles which are unreactive under normal room conditions. It is applicable to inks in apparent viscosity range of 2 Pa.s. to 200Pa. s .

Graphic Technology – Determination of Rheological Properties Of Paste Inks and Vehicles by the Falling Rod Viscometer

ASTM D4713-92(2007) 热固和液体印刷油墨系统非挥发物含量的标准测试方法

Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems

BS ISO 2836:2007 印刷技术 印刷品和印刷油墨 耐各种试剂的评估

Graphic technology. Prints and printing inks. Assessment of resistance to various agents

BS ISO 2836:2004 印刷技术.印刷品和印刷油墨.耐各种试剂的评估

This International Standard specifies methods of assessing the resistance of printed materials to liquid and solid agents, solvents, varnishes, and acids. It applies to printing on all substrates by all of the traditional printing processes and digital imaging processes such as ink-jet, electrophotography, etc. using marking materials appropriate to the printing process used.

Graphic technology - Prints and printing inks - Assessment of resistance to various agents

QB/T 1300-2007 订书机

本标准规定了订书机的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准主要适用于办公装订用的多种型号订书机。

Stapler

QB/T 2860-2007 墨汁

本标准规定了墨汁的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于书法、绘画、拓印和工业、艺术晶着色用的墨汁。

Prepared Chinese ink