87.080 墨水、油墨 标准查询与下载

KS X ISO 11628-2005 图形技术 印刷品和印刷油墨 印刷品耐酸性的测定

Graphic technology－Prints and printing ink－ Determination of resistance of prints to acids

KS X ISO 2837-2005 图形技术 印刷品和印刷油墨 耐溶剂性评估

Graphic technology－Prints and printing inks－Assessment of resistance to solvents

KS X ISO 11628:2005 印刷技术印刷品和油墨印刷品耐酸性的测定

Graphic technology－Prints and printing ink－ Determination of resistance of prints to acids

KS X ISO 2837:2005 印刷技术印刷品和油墨耐溶剂性的评定

Graphic technology－Prints and printing inks－Assessment of resistance to solvents

KS M 5955-2005(2018) 测试方法INK报纸

Newspaper Ink Test Method

KS M 5955-2005 黑色印刷油墨实验方法(报纸用)

이 규격은 신문 잉크의 시험 방법에 대하여 규정한다.

Testing method for newspaper ink

DIN ISO 2836:2005 印刷技术.印刷品和印刷油墨.耐各种试剂性的评定

This International Standard specifies methods of assessing the resistance of printed materials to liquid and solid agents, solvents, varnishes, and acids. It applies to printing on all substrates by all of the traditional pdnting processes and digital imaging processes such as ink-jet, electrophotography, etc. using marking materials appropriate to the printing process used.

Graphic technology - Prints and printing inks - Assessment of resistance to various agents (ISO 2836:2004)

QB/T 2730.2-2005 喷墨打印墨水.第2部分:喷绘墨水

本部分规定了喷绘机用喷绘墨水的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本部分适用于喷绘机用喷绘墨水。

Ink for ink jet printing - Part 2: Ink for large format jet printer

ISO 2846-5:2005 印刷技术.四色印刷油墨的颜色和透明度.第5部分:苯胺印刷

This part of ISO 2846 specifies the colour and transparency to be produced by each ink in a process colour ink set (including extender) intended for four-colour flexographic printing, when printed under specified flexographic printing conditions. It also describes the conformance test method. This part of ISO 2846 does not specify pigments (or spectral reflectance), in order not to preclude developments that may enable different pigment combinations to be used advantageously, while still achieving the colorimetric requirements specified in this part of ISO 2846.

Graphic technology - Colour and transparency of printing ink sets for four-colour printing - Part 5: Flexographic printing

ASTM E1422-05 法医书写用墨水比对试验方法的标准指南

1.1 This Guide is intended to assist forensic examiners comparing writing or marking inks. Included in this analysis scheme are the necessary tools and techniques available to reach conclusions as to the common or different origin of two samples of ink. 1.2 Identifying ink formulas as to their manufacturer or time of manufacture as well as performing ink dating examinations are beyond the scope of this guide. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Test Methods for Forensic Writing Ink Comparison

ISO 2836:2004 印刷技术.印刷品和印刷油墨.印刷品耐各种试剂性的评定

This International Standard specifies methods of assessing the resistance of printed materials to liquid and solid agents, solvents, varnishes, and acids. It applies to printing on all substrates by all of the traditional printing processes and digital imaging processes such as ink-jet, electrophotography, etc. using marking materials appropriate to the printing process used.

Graphic technology - Prints and printing inks - Assessment of resistance of prints to various agents

ARMY A-A-208 B VALID NOTICE 3-2004 不透明制版用标识油墨(多孔和非多孔表面)

A-A-208B, dated 12 January 2000, has been reviewed and determined to be valid for use in acquisition

INK, MARKING, STENCIL, OPAQUE, (POROUS AND NON-POROUS SURFACES)

ASTM E1789-04 书写墨水识别的标准指南

1.1 This guide covers assisting forensic examiners in identifying writing inks. Included in this analysis scheme are the necessary tools and techniques which have been successfully utilized to reach conclusions as to the common or different origin of two samples of ink.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Writing Ink Identification

KS X ISO 2846-3-2003(2023) 图形技术-四色打印墨盒的颜色和透明度-第3部分:出版图形

Graphic technology - Color and transparency in four-color printing ink sets - Part 3: Publishing gravure

KS X ISO 2846-3-2003(2018) 图形技术-4色印刷墨水套装的颜色和透明度-第3部:出版凹版

Graphic technology - Color and transparency in four-color printing ink sets - Part 3: Publishing gravure

KS X ISO 2846-3:2003 印刷技术.四色印刷油墨的颜色和透明度.第3部分:书刊凹版印刷

? ????? ??? ???? ?? ???? ??? ? 4? ?? ???? ??? ??

Graphic technology-Colour and transparency of printing ink sets for four-colour-printing-Part 3:Publication gravure printing

QB/T 1865-2003 胶版卷筒纸冷固型油墨(黑)

本标准规定了胶版卷筒纸冷固型油墨(黑)的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于胶印轮转印刷机，在凸版卷筒纸、新闻卷筒纸上印刷使用的胶版卷筒纸冷固型油墨(黑)。

Web-fed offset cold-set ink (black)

QB/T 1046-2003 凹版塑料薄膜表印油墨

本标准规定了聚酞胺树脂型凹版塑料薄膜表印油墨的产品分类、要求、检验规则和标志、包装、运输、贮存 本标准适用于凹版轮转印刷机上使用的凹版塑料薄膜表印油墨，该油墨用于经处理的聚乙烯、聚丙烯等塑料薄膜的表面印刷。

Gravure ink for plastic film

QB/T 2624-2003 胶版单张纸油墨

本标准规定了胶版单张纸油墨的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于在单、双或多色胶印机上使用的胶版单张纸油墨。该油墨用于在胶版纸等各种印刷纸张上印刷图片及商标等。

Sheet-fed offset ink

ASTM D6989-03 溶剂和水性油墨树脂溶液的制备标准实践

This practice provides a means of preparing resin solutions by the “cold cut” method, modeling high-shear production dispersion techniques.1.1 These practices describe laboratory procedures for preparing a solvent or water based ink resin solution in low boiling solvent or alkaline water using two types of lab equipment; (1) an industrial blender (Sections 3-7), and (2) a laboratory roller mill (Sections 8-12).Note 18212;ASTM Subcommittee D01.37 recommends using the industrial blender where possible.1.2 These practices use laboratory equipment generally available in a normal, well-equipped laboratory.1.3 These procedures are for use with ink resins intended mainly for liquid (for example, flexographic and rotogravure) inks. The type of resins is typically, but not limited to, acrylic and styrene/acrylic copolymers, polyamides, polyesters, polyvinylbutyral, and maleated/fumarated rosin esters.1.4 The typical low boiling solvents to be used include ethanol, isopropanol, n-propanol, ethyl acetate, isopropyl acetate, and n-propyl acetate. For water based ink resin solutions, water is used in combination with ammonium hydroxide or amines such as dimethylethanolamine, monoethanolamine, and triethylamine.1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions