共找到 420 条与 墨水、油墨 相关的标准,共 28 页
本标准规定了油画棒的分类与命名、要求、试验方法、检验规则和标志、包装、运输、储存。 本标准适用于儿童、学生及绘画爱好者用的油画棒,亦适用于相应的油彩粉笔、油粉笔、粉蜡笔。
Oil pastel
Graphic technology - Test print preparation for offset and letterpress inks; Technical Corrigendum 1
Graphic technology-Prints and printing inks-Assessment of resistance to solvents
Graphic technology-Prints and printing inks-Assessment of resistance to solvents
This part of ISO 2846 specifies the colour and transparency to be produced by a process colour ink set including extender intended for four-colour publication gravure printing when printed under specified gravure printing conditions. It also specifies the test method to ensure conformance. This part of ISO 2846 does not specify pigments (or spectral reflectance) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in this part of ISO 2846. NOTE This part of ISO 2846 may also apply to certain non-publication gravure applications.
Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - Part 3: Publication gravure printing
Graphic technology-Prints and printing ink- Determination of resistance of prints to acids
Graphic technology-Prints and printing ink- Determination of resistance of prints to acids
Graphic technology. Test print preparation for offset and letterpress inks
Graphic technology. Test print preparation for offset and letterpress inks
BS ISO 2846-4:2000 Graphic technology. Colour and transparency of ink sets for four-colour-printing. Screen printing BS ISO 2846-4 specifies the colour and transparency to be produced by a process colour ink set, including extender, intended for four-colour screen printing when printed under specified screen printing conditions. It also describes the test method to ensure conformance. This part of ISO 2846 is applicable to screen inks for conventional drying and for radiation curing. BS ISO 2846-4 does not specify pigments (or spectral reflectance) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in BS ISO 2846-4. Contents of BS ISO 2846-4: Foreword Introduction 1 Scope 2 Normative references 3 Terms and definitions 4 Test method 4.1 Principle 4.2 Test print preparation 4.3 Colour measurement procedure 5 Colour and transparency 5.1 Conformance 5.2 Colorimetric values 5.3 Transparency characteristics Annex A (normative) Reference substrate Annex B (informative) Spectral data Annex C (informative) Colorimetric values for non-normative conditions Annex D (informative) Detailed explanation of test method, including examples Bibliography
Graphic technology. Colour and transparency of ink sets for four-colour-printing - Screen printing
This part of ISO 2846 specifies the colour and transparency to be produced by a process colour ink set, including extender, intended for four-colour screen printing when printed under specified screen printing conditions. It also describes the test method to ensure conformance. This part of ISO 2846 is applicable to screen inks for conventional drying and for radiation curing. This part of ISO 2846 does not specify pigments (or spectral reflectance) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in this part of ISO 2846.
Graphic technology. Colour and transparency of ink sets for four-colour-printing. Screen printing
The document specified guidelines for testing and assessment of the resistance to alkaline solution for multi-path beverage bottles as an overall system including substrates, printing inks film and if necessary lacquer coating. It applies for paper labels or metallic paper. The result is only valid for the tested combination of substrates and printing inks. It defines the method for the designation of the resistance of printed labels to hot alkaline solution and the relevant test conditions.#,,#
Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 7: Behaviour of labels for beverage bottles on exposure to hot alkaline solution, resistance to alkaline solution
本标准适用于航空燃油(通称喷射机燃油)。
Aviation turbine fuel
Diese ?NORM legt eine Prüfungsmethode für die im Hochdruck- bzw. Offsetdruckverfahren eingesetzten Druckfarbe -Bedruckstoff - Kombinationen (Papiere und Kartone) fest. Die für das Wegschlagverhalten relevanten Bedruckstoff-Kombinationen (Papiere und Kartone) und Farbeigenschaften lassen sich ermitteln.
Testing of prints and printing inks - lnk absorption test
Die vorliegende ?NORM beschreibt ein beschleunigtes Prüfverfahren, wobei die Lichtquelle und die Filter zur Simulation des Tageslichts sowie die Exposition der Proben gegenüber künstlichem Licht festgelegt werden. Sie ist für Drucke auf allen Bedruckstoffen nach allen Druckverfahren und für Druckfarben in Form genormter Druckproben gem?? ?NORM A 1200-1 anzuwenden.
Testing of prints and printing inks-Assessment of light fastness using filtered xenon arc light
This part of ISO 2846 specifies the colour and transparency to be produced by a process colour ink set, including extender, intended for four-colour screen printing when printed under specified screen printing conditions. It also describes the test method to ensure conformance. This part of ISO 2846 is applicable to screen inks for conventional drying and for radiation curing. This part of ISO 2846 does not specify pigments (or spectral reflectance) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in this part of ISO 2846.
Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - Part 4: Screen printing
Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 6: Behaviour of labels for beverage bottles on exposure to hot alkaline solution, resistance to penetration and come-off time
This part of ISO 2846 specifies the colour and transparency to be produced by inks intended for four-colour coldset web offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure conformance. This part of ISO 2846 does not apply to fluorescent inks and does not specify pigments (or spectral reflectance) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in this part of ISO 2846.
Graphic technology - Colour and transparency of ink sets for four-colour-printing - Part 2: Coldset offset lithographic printing
この規格は,平版印刷に用いられるインキ,展色試料及び印刷物を試験する方法について規定する。
Lithographic Inks -- Part 1: Testing methods
この規格は,平版のプロセス印刷に用いられるプロセスインキの特定の条件,特定の用紙及びブリンタビリティーテスタ一を用いて展色したときの色特性及びプロセスインキの透明性について規定する。
Lithographic Inks -- Part 2: Colour and transparency of ink sets for four-colour-printing
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号