91.010.99 其他方面 标准查询与下载

BS PD CEN/TR 15941:2010 建筑工程的可持续性.环境产品声明.通用数据的选择和使用方法

This Technical Report supports the development of Environmental Product Declarations (EPD). It assists in using generic data according to the core product category rules (prEN 15804) during the preparation of EPD of construction products, processes and services in a consistent way, and also in the application of generic data in the environmental performance assessment of buildings according to prEN 15978. The requirements for the use of generic data are described in prEN 15804.

Sustainability of construction works — Environmental product declarations — Methodology for selection and use of generic data

PD CEN/TR 15941:2010 建筑施工的可持续性.环境产品声明.选择和使用通用数据的方法

This Technical Report supports the development of Environmental Product Declarations (EPD). It assists in using generic data according to the core product category rules (prEN 15804) during the preparation of EPD of construction products, processes and services in a consistent way, and also in the application of generic data in the environmental performance assessment of buildings according to prEN 15978. The requirements for the use of generic data are described in prEN 15804.

Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data

ASTM E2129-10 建筑产品可持续性评定用数据采集的标准操作规程

1.1 This practice covers a set of instructions for collecting data to be used in assessing the sustainability of building products for use in both commercial and residential buildings.1.1.1 There are many features of a building that contribute to sustainability; one of them is the selection of products for use in a building. Other key features influencing sustainability include, but are not limited to: overall efficiency of the design of the building, the impact the building has on the habits of the occupants, and the impact the building has on the microclimate and macroclimate. This standard addresses sustainability issues related to building products. This standard does not address sustainability issues related to overall building design, site selection, building operations, or other features influencing sustainability.1.1.2 While it is recommended that users rely on professional judgment informed by both environmental expertise and specific knowledge of the intended use of the product, this standard provides no instruction as to interpretation of the data obtained. Interpretation of the data obtained is the responsibility of the user of this standard.1.1.3 This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This practice is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word "standard" in the title means only that the document has been approved through the ASTM consensus process.1.2 This standard is organized according to the Construction Specifications Institute's (CSI) MasterFormat sections to promote consistency in the evaluation of building products.1.3 This standard includes general, comprehensive data requirements. Depending upon the building product, certain data requirements may not apply given the unique characteristics of the product and the potential environmental impacts related to the intended use of the product. Depending upon the building product, certain data requirements may need to be added as appropriate to the unique characteristics of the product and the potential environmental impacts related to the intended use of the product.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Data Collection for Sustainability Assessment of Building Products

PD CEN/TR 15563:2007 临时工程设备 实现健康和安全的建议

Temporary works equipment - Recommendations for achieving health and safety

DB11/ 382-2006 建设工程安全监理规程

为了促进北京市建设工程施工阶段安全生产监理工作(以下简称安全监理)的程序化、规范化、科学化，提高建设工程施工阶段安全监理工作的水平，落实安全监理职责，制定本规程。本规程依据《建设工程安全生产管理条例》、《北京市安全生产条例》、《建设工程监理规范》等有关建设工程安全监理的法规和标准编制。本规程是对《建设工程监理规程》的补充。本规程适用于北京地区新建、扩建、改建和拆除的建设工程施工阶段安全监理活动。

Specification of safety construction supervisio

DS/CEN/TR 15226:2006 建筑产品 产品技术规范中的声学处理

This document specifies the technical requirements relating to acoustics for a product standard, European Technical Approval Guidelines (ETAG) or European Technical Approval (ETA) for a specific building product or equipment, or a family of building products or equipment. In particular, it gives advice on how to write requirements in response to the mandated characteristics on acoustics under the Construction Products Directive.NOTE 1 In the remainder of this document, the terms used relate to CEN and product standards. The concepts are, however, equally applicable to the European Organisation for Technical Approvals (EOTA).The purpose of this document is t

Building products - Treatment of acoustics in product technical specifications

ASTM E2083-05(2010) 建筑施工现场要求和办公通常收益的标准分类

4.1 This classification defines an integral part of any construction estimate and cost record. It classifies the non-permanent portion of construction activity that is essential to allow physical implementation of the required work to take place.4.2 Used in conjunction with UNIFORMAT II, this classification provides for consistent and complete estimating of building construction work, especially during the design phase. The same considerations of consistent use and commonality to all work have been applied here.4.3 This classification is sufficiently generic to allow its use in estimating all forms of construction work and through all stages of planning, design, use, and disposal. Additionally, it is appropriate for use in both elemental estimates and trade estimates.1.1 This standard covers a classification for field requirements, office overhead, and profit for use in construction estimating. This classification is common to all forms of construction, and its components are an integral part of any construction cost estimate. The classification serves as a consistent reference for analysis, evaluation, and monitoring during the feasibility, planning, design, and construction phases of building. Used in conjunction with UNIFORMAT II and other elemental classifications, including Classification E2168, it also ensures consistency in the economic evaluation of construction work across time and from project to project. Through consistency in estimating and cost recording it enhances reporting at all stages in constructionfrom feasibility and planning through the preparation of working documents, construction, maintenance, rehabilitation, and disposaland is a necessary part of the reporting process described in Practice E1804. 1.2 This classification applies to all construction work. 1.3 This classification is not based on permanent physical elements of construction (as defined and classified in Classification E1557). Rather, the classification items are major, non-permanent, cost components common to all construction work. They perform the same function and provide for similar needs regardless of the design, specification, construction method, or materials used in the physical construction.

Standard Classification for Building Construction Field Requirements, and Office Overhead Profit

ASTM E2083-05(2016) 建筑施工现场要求和办公室管理费利润的标准分类

1.1 This standard covers a classification for field requirements, office overhead, and profit for use in construction estimating. This classification is common to all forms of construction, and its components are an integral part of any construction cost estimate. The classification serves as a consistent reference for analysis, evaluation, and monitoring during the feasibility, planning, design, and construction phases of building. Used in conjunction with UNIFORMAT8201;II and other elemental classifications, including Classification8201;E2168, it also ensures consistency in the economic evaluation of construction work across time and from project to project. Through consistency in estimating and cost recording it enhances reporting at all stages in construction—from feasibility and planning through the preparation of working documents, construction, maintenance, rehabilitation, and disposal—and is a necessary part of the reporting process described in Practice8201;E1804. 1.2 This classification applies to all construction work. 1.3 This classification is not based on permanent physical elements of construction (as defined and classified in Classification E1557). Rather, the classification items are major, non-permanent, cost components common to all construction work. They perform the same function and provide for similar needs regardless of the design, specification, construction method, or materials used in the physical construction.

Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit

DB50/ 5024-2002 重庆市居住建筑节能设计标准（报批稿）

本标准的主要技术内容是：总则；术语；室内热环境和建筑节能设计指标；建筑和建筑热工节能设计；建筑物的节能综合指标；采暖、空调和通风节能设计。本标准适用于重庆市新建、改建和扩建居住建筑的建筑节能设计。

Design Standard of Residential Buildings for Energy Conservation in Chongqing

EN 17213:2020/prA1 门窗 环境产品声明 补充 EN 15804 的产品类别规则，适用于窗户和人行门

This document provides product category rules (PCR) for Type III environmental declarations for windows and pedestrian doorsets as defined in EN 14351-1 and EN 14351-2. Windows and pedestrian doorsets additionally providing fire resistance and/or smoke control characteristics according to EN 16034 are also covered by this document. NOTE 1 Windows that incorporate shutters and/or shutter boxes and/or blinds are in scope of this PCR. For any connected electrical devices (e.g. motors, sensors) -see 6.3.4.2. This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012+A1:2013. The document is to be used in conjunction with EN 15804:2012+A1:2013, not replace it. NOTE 2 The assessment of social and economic performances at product level is not covered by this document. The core PCR: - defines the parameters to be declared and the way in which they are collated and reported; - describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages; - defines rules for the development of scenarios; - includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied; - includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant; - defines the conditions under which construction products can be compared based on the information provided by EPD. For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

Windows and doors - Environmental Product Declarations - Product category rules complementary to EN 15804 for windows and pedestrian doorsets