91.040.01 建筑物综合 标准查询与下载

ISO 11855-5:2021 建筑环境设计.嵌入式辐射加热和冷却系统.第5部分:安装

This document establishes requirements for the installation of embedded radiant heating and cooling systems. It specifies general and uniform requirements for the design and construction of heating and cooling floors, ceiling and wall structures to ensure that the heating/cooling systems are suited to the particular application. The requirements specified by this document are applicable only to the components of the heating/cooling systems and the elements which are part of the heating/cooling surface and which are installed due to the heating/cooling systems. This document is applicable to water-based embedded surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction without any open-air gaps, but are not applicable to panel systems with open-air gaps which are not integrated into the building structure.

Building environment design — Embedded radiant heating and cooling systems — Part 5: Installation

DB33/T 2356-2021 无障碍家居设施建设规范

Barrier-free home facilities construction norms

ISO 11855-4:2021 建筑环境设计.嵌入式辐射供暖和制冷系统.第4部分:热主动建筑系统动态供暖和制冷能力的尺寸和计算

This document allows the calculation of peak cooling capacity of Thermo Active Building Systems (TABS), based on heat gains, such as solar gains, internal heat gains, and ventilation, and the calculation of the cooling power demand on the water side, to be used to size the cooling system, as regards the chiller size, fluid flow rate, etc. This document defines a detailed method aimed at the calculation of heating and cooling capacity in non-steady state conditions.

Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)

ISO 11855-3:2021 建筑环境设计——嵌入式辐射供暖和制冷系统的设计、尺寸标注、安装和控制第3部分:设计和尺寸标注

This document establishes a system design and dimensioning method to ensure the heating and cooling capacity of the radiant heating and cooling systems.

Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 3: Design and dimensioning

ISO 11855-1:2021 建筑环境设计.嵌入式辐射供暖和制冷系统.第1部分:定义符号和舒适性标准

This document specifies the basic definitions, symbols, and comfort criteria for embedded radiant heating and cooling systems.

Building environment design — Embedded radiant heating and cooling systems — Part 1: Definitions, symbols, and comfort criteria

OEVE/OENORM EN 17210-2021 建筑环境的可达性和可用性 功能要求

Accessibility and usability of the built environment - Functional requirements

DIN EN 17210:2021 建筑环境的可达性和可用性 功能要求；德文版 EN 17210:2021

This European Standard (EN) describes basic, common minimum functional requirements and recommendations for an accessible and usable built environment, following the Design for All/Universal design principles . The standard specifies what is necessary to align with these principl

Accessibility and usability of the built environment - Functional requirements; German version EN 17210:2021

DIN 277:2021 建筑施工中的面积和体积

This document deals with how to determine areas and volumes in building construction during the planning, execution and occupation phases. It applies to the areas and volumes of the buildings themselves and to site areas.

Areas and volumes in building construction

EN ISO 11855-1:2021 建筑环境设计.嵌入式辐射加热和冷却系统的设计,尺寸,安装和控制.第1部分:定义,符号和舒适性标准

Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria (ISO 11855-1:2021)

FprEN 17472-2021 建筑工程的可持续性 可持续性评价土木工程 计算方法

Sustainability of construction works - Sustainability assessment civil engineering works - Calculation methods

UNI EN 15643-2021 建筑工程的可持续性 建筑和土木工程评估框架

Sustainability of construction works - Framework for assessment of buildings and civil engineering works

DS/EN 15643:2021 建筑工程的可持续性 建筑和土木工程评估框架

Sustainability of construction works – Framework for assessment of buildings and civil engineering works

BS EN 15643:2021 建筑工程的可持续性 建筑和土木工程评估框架

Sustainability of construction works. Framework for assessment of buildings and civil engineering works

GSO ISO 15686-7:2021 建筑物和建造资产 使用寿命规划 第7部分：实践中使用寿命数据反馈的性能评估

ISO 15686-7:2017 provides a generic basis for performance evaluation for feedback of service life data from existing buildings and constructed assets, including a definition of the terms to be used and the description of how the (technical) performance can be described and documented to ensure consistencies. The purpose of this document is to describe the principles for service life performance surveys and evaluation with an emphasis on technical recommendations. It describes a generic methodology, including the terms to be used, that provides guidance on the planning, documentation and inspection phases, as well as on analysis and interpretation of performance evaluations, both on the object (single building) and network (stock of buildings) level. While maintenance planning is outside the scope of this document, maintenance-driven inspections and subsequent recommended actions could have significant effects upon service life and performance.

Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data from practice

GSO ISO 16745-2:2021 建筑物和土木工程的可持续性 使用阶段现有建筑物的碳度量 第2部分：验证

ISO 16745-2:2017 specifies requirements for the verification of a carbon metric calculation for GHG emissions of an existing building during the use stage, where the carbon metric calculation is performed in accordance with ISO 16745‐1. NOTE Before verification, the carbon metric according to ISO 16745‑1 is a claim. Only after the verification according to this document can the carbon metric be communicated as a carbon metric declaration.

Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 2: Verification

GSO ISO 15928-4:2021 房屋 性能描述 第4部分：消防安全

ISO 15928-4:2017 sets out a method for describing the fire safety performance of houses. It covers user needs, provides performance descriptions, and outlines evaluation processes. It includes the description of relevant parameters for early warning, fire suppression, fire containment, means of escape, control of structural behaviour, and emission and spread of fire effluent. ISO 15928-4:2017 is intended for use in the evaluation of the design and construction of houses, in the international trading of houses or their sub-systems, and in developing risk-management tools for the protection of houses. It does not specify a level of performance and it is not intended to provide a design method and/or criteria. ISO 15928-4:2017 does not cover the performance of houses exposed to wild fire. NOTE 1 Structural safety and other performance attributes of a house are covered in other parts of the ISO 15928 series. NOTE 2 The emission of smoke and hot gases from contents in the house when ignited can impact the fire safety performance of a house, but the type or nature of such contents brought into the house is not the subject of the evaluation process. NOTE 3 The term "wild fire" is used to mean the concept of wild land fire, bush fire and unplanned burning in vegetative fuels, etc.

Houses — Description of performance — Part 4: Fire safety

GSO ISO 18566-3:2021 建筑环境设计 循环辐射加热和冷却板系统的设计、测试方法和控制 第3部分：天花板安装辐射板的设计

ISO 18566-3:2017 specifies the design of ceiling mounted radiant panels. ISO 18566-3:2017 is applicable to water-based heating and cooling panel systems (free hanging) in residential, commercial and industrial buildings. The methods apply to systems mounted to the ceiling construction with an open air gap. ISO 18566-3:2017 applies to all types of prefabricated radiant panels that are part of the room periphery. ISO 18566-3:2017 does not cover panels embedded into ceiling, wall or floor structures without open air gap and hybrid (combined thermal radiation and forced-convection) ceiling panels.

Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 3: Design of ceiling mounted radiant panels

GSO ASTM E2432:2021 与建筑物相关的可持续性一般原则标准指南

1.1 Sustainabilty has three types of general principles: environmental, economic, and social. This guide covers the fundamental concepts and associated building characteristics for each of the general principles of sustainability. 1.2 This guide distinguishes between ideal sustainability and applied sustainability. Ideally, human activities would not require making trade-offs among environmental, economic, and social goals. However, this guide recognizes that, in applying sustainability principles to buildings, decision makers must often balance opportunities and challenges associated with each of the general principles. 1.3 This guide identifies general methodologies associated with the decision-making process used in pursuing sustainability

Standard Guide for General Principles of Sustainability Relative to Buildings

GSO ISO 15928-1:2021 房屋 性能描述 第1部分：结构安全

ISO 15928-1:2015 sets out a method for describing the structural safety performance of houses. It covers objectives, provides performance descriptions, establishes parameter descriptions, and outlines evaluation processes. It includes a description of permanent, imposed, wind, seismic, snow and other actions as well as structural resistance. ISO 15928-1:2015 is intended for use in the evaluation of the design and construction of houses, in the international trading of houses or their sub-systems, and in developing risk-management tools for the protection of houses. The ISO 15928‑ series does not specify a level of performance and it is not intended to provide a design method and/or criteria. It describes the structural safety of a house as a whole. NOTE 1 Annex A includes background information on this part of ISO 15928, guidance on its use, and suggestions on good practice. NOTE 2 Details on references referred to in Notes are provided in a Bibliography. NOTE 3 Structural serviceability, durability and other attributes are covered in other parts of ISO 15928.

Houses — Description of performance — Part 1: Structural safety

GSO ISO 19208:2021 指定建筑物性能的框架

ISO 19208:2016 provides the framework for specifying the performance of a building as a whole or a part thereof in order to satisfy specified user requirements and societal expectations. ISO 19208:2016 covers buildings as constructed and inbuilt fixed components. It does not cover a) the use of the land for buildings, b) the design and operation of the environment within which buildings are located, and c) moveable contents within buildings. NOTE 1 Guidance on the application of certain clauses is provided in Annex A. NOTE 2 A part of a building includes subsystems, spaces, elements, assemblies, components, products and materials.

Framework for specifying performance in buildings